|
PalmControl®
and Foot Control
Engraving Sets
Foot control AirGraver orders generally ship in 5
working days and PalmControl orders in 30 to 40 working
days. Orders over $400 ship by FedEx. Overseas orders for AirGravers and PalmControls ship by FedEx International.
Click here for help in choosing
and options
|
Classic® AirGraver®
setup
without
sharpener
Includes:
Classic handpiece
Regulator, idle adjust with Foot Control
Tungsten dead blow piston
Presharpened graver
Three high speed steel 3/32" square graver blanks
Leather pouch, extra screws, o-rings, wrenches, handpiece tubing
and connectors, compressor braided hose and owner's manual.
 |
Classic hand pieces are currently shipping engraved. Click
to enlarge
Classic Foot Control Set without
sharpener (Pictured to the left)
$1469
NOTE: The Classic can be ordered with one of two
types of noses. Info about that
here.
Foot control AirGraver orders
generally ship in 3
to 5 working days.
Info
about the foot control regulator setup and optional items for
it. |
Foot
Control Classic engraving set with sharpener,
and gravers
(Set pictured above
with the addition of graver sharpener and graver blanks)
Classic handpiece
Regulator, idle adjust with Foot Control
Tungsten Dead blow piston
Carbalt™ graver blanks 5 pack
M42 graver blanks 5 pack
Presharpened graver
Three high speed steel 3/32" square graver blanks
Leather pouch, extra screws, o-rings, wrenches, handpiece
tubing and connectors, compressor braided hose and owner's
manual.
Lindsay Sharpener set with basic templates, Includes:
Sharpening fixture, four
diamond bench stones (260, 600, 1200, 2000), plus 4 templates:
Universal, Detailing, 105, and Flat & Knife Combo |
Classic
Foot Control Set
with
sharpener
$1,888
NOTE: The Classic can be ordered with one of two
types of noses. Info about that
here.
Foot control AirGraver orders
generally ship in
3 to 5 working days.
|
BenchJewel® ArtGraver™ Handpiece with
regulator foot control set.
$1071
More information about the BenchJewel graver at:
www.BenchJewel.com
Help in choosing and options
 |
The BenchJewel Handpiece comes
with a Tungsten piston, order an additional piston that is
stainless piston is
separately if desired. Stainless piston $125
Info
about the foot control regulator setup and
optional items for it.
Collets and Adapter for
BenchJewel ArtGraver
BenchJewel collets and adapters are made from stainless steel.
Two pack Long Collets
$27
Two pack Short Collets
$26
The adapter can be moved from one long collet to another long collet.
One adapter and one long collet.$31
Two pacak Hex Wrenches
$2.50
|
|
Portable PalmControl
Classic setup with CO2 regulator, and basic sharpener for being
able to
re-sharpen your graver.
(Note: for a more completed PalmControl set see the next set
below)
Set includes:
-PalmControl®
Classic™ with burl handle
-Presharpened Carbalt graver (sharpened with the universal
template).
-
Three high speed steel 3/32" square graver blanks.
- Sharpening fixture with 116 degree universal template.
-3000 diamond bench stone.
-CO2 regulator for 567 gram paintball cylinders
-Leather pouch, extra screws, o-rings, wrenches, handpiece
tubing and connectors and owner's
manual.
Note: For a more complete
PalmControl Classic™ set,
see the set below
|
Portable PalmControl
Classic setup with basic sharpener
$3151
NOTE: The PalmControl Classic can be ordered with one
of two types of noses. Info about
that here.
PalmControls are
shipping in approx 15 working days from receiving payment.
A 567 gram (20 oz)
paintball CO2 cylinder generally lasts around 8 hours and a
little16 gram cartridge lasts around 20 minutes. The 16 adapter
as pictured to the left isn't included in this set. If you
would also like the 16 gram adapter find it on the CO2 page.
Visit the CO2 page for information about the
CO2 with the PalmControl. Here is a
forum thread link about the
efficiently the AirGravers are with air and CO2 usage.
The sharpener in this set
includes a 3000 diamond bench stone. This is the stone that is
used for re-sharpening a dull or broken ponit. In order or
you to sharpen the 3 HSS graver blanks that are included with
the set you will need at minimum a 260 diamond bench stone.
Below are "add to cart" links for it as well as the 600 and 1200
grit stones. Here is a
thread and video about Accurate and quick re-sharpening.
Sharpening instructions and information are on the
engraving school site.
Bench stone 260 grit $39
Bench stone 600 grit
$39
Bench stone 1200
grit
$39
Tungsten piston max power $125
For additional templates
to sharpening other graver shaped points visit the
sharpening page. For 95% of the
engraving style that
Steve Lindsay does he uses a Carbalt 116 universal point
that is included with and installed in the PalmControl®. |
PalmControl® Classic® engraving set
with sharpener
Set Includes:
Classic™ PalmControl® handpiece with Burl handle or a NitroG20
PalmControl® h.p.
Tungsten Dead blow piston
CO2 125PSI Regulator with Intergrated 20oz CO2 paintball
threads
Regulator & fittings for attaching PalmControl® to an air
compressor
Carbalt graver blanks 5 pack
M42 graver blanks 5 pack
Three high speed steel 3/32" square graver blanks
Leather pouch, extra screws, o-rings, wrenches, handpiece
tubing and connectors, compressor braided hose and owner's
manual.
Lindsay Sharpener set with basic templates, Includes:
Sharpening fixture, 6"x6' sharpening base, four
diamond bench stones (260, 600, 1200, 2000), plus 4 templates:
Universal, Detailing, 105, and Flat & Knife Combo
|
PalmControl
Classic set with sharpener
$3,696
NOTE: The PalmControl Classic can be ordered with one
of two types of noses.
Info about
that here.
NitroG20 PalmControl (Santophrene handle), air regulator setup,
tungsten piston, one presharpened HSS, eight HSS graver blanks,
and five M42 graver blanks. The Nitro uses it's own collets, two
are included.
$3,543
Extra NitroG20 collets
$25
each
PalmControl
orders
generally ship in
15 to 20 working days.
|
AirGraver®
Foot Control Information
  |
AirGraver Foot Control
Information and options for Auxiliary port.
AirGraver regulator setup
for connecting to an air compressor. Includes the patent pending
two mode operation, with idle and without idle for controlling
an AirGraver handpiece.
Option
items for the Auxiliary port. Please click photos to the
left for references.
Splitter for Auxiliary port. The splitter
provides a second Aux. port. It can be installed it several
ways:
1: Screw directly into the aux port.
2: Screw into the on/off toggle.
3: Screw directly into the aux port and then
screw the on/off toggle into one of its ports. Click photos to
the left.
$16
Optional on/off toggle switch for Auxiliary port.
Click photos to the left.
$40
|
COIN CARVING SETS
 |
Basic Coin Carving Set w/three
stones
-Set of Paolo "MRTHE" Curcio, carving templates
(Detail link about these templates)
-Universal point template
-Sharpening metal fixture for templates
-3 diamond bench stones: 260, 1200, and 2000 grits
-3 pack HSS graver blanks
-Stainless adjustable manual palm push graver
Basic Coin Carving Set, w/two
stones
(Same as above but with two
diamond bench stones, 260 grit and 1200 grit)
|
Basic Coin Carving
w/three stones
$292
Basic Coin Carving
set w/two stones
(with two diamond bench
stones, 260 grit and 1200 grit)
$253
|
 |
Deluxe Coin Carving Set
-Set of Paolo "MRTHE" Curcio, carving templates
(Detail link about these templates)
Universal point template
-Sharpening metal fixture for templates
-4 diamond bench stones: 260, 600, 1200, and 2000 grits
-2 pack M42 graver blanks
-2 pack HSS graver blanks
-2 pack Carbalt graver blanks
-Stainless adjustable manual palm push graver
-Stainless Chisel graver holder for hammer/chisel engraving |
Deluxe Coin Carving Set
$427
|
Graver Sharpening Sets
Please note -- The main sharpening page with all the
various sharpening templates is at
this link.
Sharpener set with one
template
Includes: Sharpener with fixture and all four
diamond bench stones (260, 600, 1200, 2000), and the Universal
116 degree V template.
$225
Sharpener set with four basic templates
Includes: Sharpener with fixture and all four diamond bench
stones (260, 600, 1200, 2000), plus 4 templates: Universal 116
degree, Detailing, 105, and Flat & Knife Combo.
$294 |
Bead Stone Setting Sharpening- Suggested by
Portland Jewelry
Academy
Bead Stone Setting Sharpening Set
Includes:
1) Metal Sharpening Fixture: $66
2) Four Diamond Bench Stones 260, 600, 1200, and 2000: $156
3) Mirror-Grave™ Polishing Sheet: $6.50
4) Flat/ knife Combo template: $23
5) Onglette template: $24
6) Round point template: $23
7) Narrower template: $8.00
8) Two High speed steel graver blanks: $12
9) One Carbalt™ graver blank: $15
10) Right/Left hand Onglette template $24
11) Two M42 graver blanks $20
$377.50
Note: if you are wanting this set without one or more of the
items for to exchange one of another, you can order this set
as it is and during checkout write a note in the place
provided what you'd like to add or subtract. Go through
with the order that way and then we can refund or send a
PayPal request for any difference in price.
|
|
