Experienced Hand Engravers are few.  This page is to help individuals and companies locate hand engravers.   If you or your company are looking for a hand engraver for a small or large project please post your inquiry on the hand engraving forum. www.engravingforum.com 

Here is how to start a new thread and post:

Go to the main section of the forum. Here is a link to it:
www.handengravingforum.com/forumdisplay.php?f=2

Click on the "new thread button"

Write your post and when you finish click the button that says:
"Submit New Thread"
___________________________________

You may need to register on the forum before it will let you post. 
 Here is a link to the registration page:
www.engravingforum.com/register.php

---

Looking for an engraver to engrave a baby spoon. In the bowl of the spoon there is a clock which would need the hands engraved to the time of birth. Also there is room in the bowl for month and year to be engraved and perhaps an initial. Also, have an English 1916 christening cup to be engraved with the baby's name. Pictures available.
Kelly Keating <nautilusjv@hotmail.com>
New York, NY USA - Friday, July 24, 2009 at 14:19:37 (EDT)

---

I have a 14k gold Maltese cross, about the size of a quarter, that I would like some words engraved on. My husband is a firefighter and this piece means a lot to me.
JP <singerjp@sbcglobal.net>
Kansas City, MO USA - Friday, July 24, 2009 at 14:17:12 (EDT)

---

Looking for someone who can does Chinese ingraving on a silver peice of jewlery i own.
randy heller <randy.heller48@gmail.com>
skokie, il USA - Monday, July 20, 2009 at 11:51:45 (EDT)

---

I am looking for someone to engrave my Father's USMC rank and serial number on two USMC swords. Most of the places I have found in Reno are award type engraving services.
Jackie <j-caton@hotmail.com>
Reno, NV USA - Thursday, June 18, 2009 at 10:42:33 (EDT)

---

Need an engraver for embossing leather - Plate would be approx. 15 x 6", 1/4" Copper or Brass. Picture is available of the art.
KevinN <kevin@earthenterprise.com>
New York, NY USA - Wednesday, June 17, 2009 at 12:45:02 (EDT)

---

Looking for someone to engrave my wedding bands in Sanskrit. Can provide a picture if needed.
Julie <hazyjewels@yahoo.com>
Richmond, VA USA - Wednesday, June 17, 2009 at 08:27:12 (EDT)

---

i have a custom made brass gass cap. machined out of a solid chunk of brass. i am wanting someone to engrave some scrolly leaves all over it. Basically go crazy. just want it to stand out. this will be the finishing piece to a chopper project. please contact me with some examples. i can send pics of what it looks like as well. its basically a 2.5 inch circle at the top and lil places on the sides that could be engraved. would have to see pics. let me know. thanks a bunch.
Adam <burn353@yahoo.com>
litchfield, il USA - Monday, May 04, 2009 at 10:25:13 (EDT)

---

Looking for an engraver able to work with Elvish Tengwar characters on gold, silver and/or leather. We have the artwork, just need someone to transfer it for us. Prefer the Chicago-land area but anywhere in the world is OK if you have the skill. Thank you!
Barbara Healy <barbhalley@aol.com>
Naperville, IL USA - Sunday, May 03, 2009 at 02:27:06 (EDT)

---

Looking for a hand engraver to engrave a little custom folding knife
Francis Au <chimagun@hkstar.com>
Hong Kong, HK Hong Kong - Monday, April 27, 2009 at 14:21:35 (EDT)

---

Looking for a brick engraver for a non profit organization. We want to sell bricks in honor or memory of friends and loved ones.
Beverly Jones <bjones8266@aol.com>
Lexington, NC USA - Monday, April 27, 2009 at 10:25:18 (EDT)

---

Hello, I'm looking for someone to engrave a quote (130 words) into an antique piece of flat metal. Please contact me ASAP if you can provide this work.
Heather Ferrell <hlferrell@gmail.com>
Raleigh/Durham, NC USA - Thursday, April 23, 2009 at 08:06:22 (EDT)

---

Hi--- I'm looking for an engraver to do detailed work on sterling silver Western buckles. Please email photos to jrippelsf@aol.com
john rippel <jrippelsf@aol.com>
santa fe, nm USA - Wednesday, April 22, 2009 at 16:06:34 (EDT)

---

Need an inscription done on my Mother's brass cremation urn as soon as possible. She will be interred next weekend.
Carmen <Bivi1@aol.com>
Miami, FL USA - Friday, April 17, 2009 at 19:19:18 (EDT)

---

I am looking for someone who can engrave names on the butt or butt caps of 2 different pool sticks. I am in East Baltimore. Thank you
Carroll D. Brown <nardyboy2000@yahoo.com>
Baltimore, MD USA - Monday, April 13, 2009 at 11:13:30 (EDT)

---

I need someone to teach me about micro-pave setting. Will pay you accordingly.
Christian Lee <noryukman@hotmail.com>
los angeles, ca USA - Wednesday, April 08, 2009 at 00:43:38 (EDT)

---

Looking for an Engraver In the Pennsylvania State, who can Engrave and Inlay gold on a Few shotguns for me with Very Deep "Game scenes" on the Recivers of an.., A.H fox Sterlingworth, Winchester Model 12, Ithaca Flue Side by side and Browning citori are some of the guns I'm in the Middle of restoring they need a Touch of some true classic "Game scenes" make them look more beautiful, I have a Few scense In mind that would look perfect on the guns .. thanks
Jason Abshier <Jabshier1@verizon.net>
Pittsburgh, Pa USA - Monday, April 06, 2009 at 20:34:19 (EDT)

---

I'm looking for someone who does brick engraving somewhere near San Luis Obispo CA.
Will Rupe <Epur@comcast.net>
San Luis ObispoCA, USA - Monday, March 30, 2009 at 20:28:52 (EDT)

---

I am searching for a Fragrance Bottle engraver for Sat. May 9. in Norfolk Va. for Dillards. If interested please contact me. 757-622-6800 helgaking@yahoo.com
Helga M. King <helgaking@yahoo.com>
Virginia Beach, Va USA - Sunday, March 29, 2009 at 11:30:15 (EDT)

---

Hello; I build bamboo fly rods and need an engraver to do a set of ferrules, ring and butt cap for a comemorative rod I'm finishing. I had talked to a guy I think was in Georgia or the Carolinas but he never got back to me. Five small pieces to do maybe more later. Mike
Mike <reelwood@att.net>
Grand Haven, MI USA - Thursday, March 12, 2009 at 17:10:10 (EDT)

---

well iam building a lowrider car and want to engrave some of my parts that goes on my suspension.
claudio <fatboyclaudio@hotmail.com>
miami, fl USA - Friday, March 06, 2009 at 12:50:39 (EST)

---

I am looking for a wood engraver,near naperville,il, to put my sons names,birth dates,and a brief sentiment from me (their dad) on the wood stocks of the 2 Citori shotguns I purchased on the day they were born. Thanks a lot!
Jim Gorgol <jgorgol@ddsltdlab.com>
Naperville, Il USA - Wednesday, March 04, 2009 at 14:58:39 (EST)

---

I have a '08 Harley Streetglide that I would like to have the horn housing engraved. I'm open as to a design but would like something to represent a Harley attitude.
Tom Marks <tmarxx@tx.rr.com>
Arlington, TX USA - Tuesday, March 03, 2009 at 22:59:53 (EST)

---

My wife and I have a set of solid silver flatware that was a wedding present to my parents. There is a B, for Bechtold, engraved on all the pieces and we would like to add a V in the same old English script for our now combined last name of VaughanBechtold. We would ideally like to find someone local. Thanks.
Barbara VaughanBechtold <vaughanbechtold@gmail.com>
Sacramento, CA USA - Monday, March 02, 2009 at 14:06:08 (EST)

---

I have a family coat of arms that I have used for year has a corporate logo. I need to take that logo the next level by adding more detail on the edges and make it look more 3D When contacting me Via e-mail adgousse@hotmail.com In the Subject Line Enter ****GOUSSE COAT OF ARMS****
Mr. Al D. Gousse <adgousse@hotmail.com>
West Palm Beach, FL USA - Saturday, February 28, 2009 at 04:18:29 (EST)

---

Hi, I am looking to have my fiance's platinum wedding band engraved on the inside with a Russian phrase (using cyrillic characters). Thanks!
Abby <splink2856@aol.com>
Silver Spring, MD USA - Saturday, February 21, 2009 at 19:26:42 (EST)

---

I am looking for someone to hand engrave a signet ring with an interlocking monogram. I want it to look fancy and flow-y with script beautiful letters. the ring is 10 K gold and the top engravable part measures 3/8". Please contact. Thanks very much!!
Joellen <jlaviza@gmail.com>
Concord, NH USA - Saturday, February 21, 2009 at 06:56:58 (EST)

---

Ryan at Mardela Springs, MD You were looking for someone to engrave a shotgun with an eagle and a american flag. How can I get in contact with you?? or please contact me. 480-415-4245 Thanks. Jose Valencia
Jose Valencia <jose@josevalenciastudio.com>
Phoenix, AZ USA - Wednesday, January 14, 2009 at 20:58:08 (EST)

---

i'm looking for someone to engrave my fathers shotgun who died in 9/11 and i'd like to get it engraved with an eagle and a american flag thanks
Ryan
Mardela springs, MD USA - Saturday, January 10, 2009 at 12:49:52 (EST)

---

I am looking for someone to engrave the handles of my spoons from my stainless flatware set. There are 12 of them and I would like an "S" engraved on it. Thank you!
Suzanne Griggs <suzanne.griggs@gmail.com>
Atlanta, GA USA - Friday, January 09, 2009 at 14:29:11 (EST)

---

hello i'm looking for someone to do some engraving on a slide for my pistol. thank you
Ron <rjpa14@verizon.net>
jessup, pa USA - Wednesday, January 07, 2009 at 08:16:40 (EST)

---

I an interested in a Hand Engraver.
Henson James <junglevirgo@yahoo.com>
Bronx, N.Y. USA - Monday, January 05, 2009 at 22:32:02 (EST)

---

I am looking for someone to do an inscription on a leatherman for me as a gift to my nephew. Please email me if you are in or near Austin or San Antonio and can do this. Thanks. Julie
Julie <jpomerantz@mwsgw.com>
Austin, Texas USA - Monday, January 05, 2009 at 18:47:35 (EST)

---

Hello......my name is Victoria, I live in Steamboat Springs, Colorado. I have recently started to wear my baby ring that is 51 years old. My initials are quickly fading. Can they be gone over before the original pattern is lost? Thank you for your response.
Victoria L McGuire <oxbow1986@aol.com>
Steamboat Springs, CO USA - Saturday, January 03, 2009 at 12:08:11 (EST)

---

hi im lookin 4 a engraver in ipswich town or fexlistowe as my gf brought me a id bracelet and she is gettin it engraved 4 me well tryin to lol can ne 1 help thanks
gavin burton <gavinburton@live.com>
ipswich town, suffolk uk - Wednesday, December 31, 2008 at 07:54:50 (EST)

---

I need to get a samurai sword engraved for my fiance with some words and a simple symbol or two. I would include detailed instructions so it would be fairly easy, Is there anyone nearby New York available to do this by Valentines? Please contact me at my email addresss.
Desiree Hewitt <detlaminx1@yahoo.com>
walworth, ny USA - Tuesday, December 30, 2008 at 15:09:18 (EST)

---

I just bought a vintage watch for my father and would like some lettering done on the back. Anyone in the New York area?
Nicholas Machen <andresdeltorro@gmail.com>
New York, NY USA - Friday, December 26, 2008 at 05:20:31 (EST)

---

I want to buy cufflink findings with my company name engraved on it.
Elizabeth Wills-King <eking@stblaw.com>
Brooklyn, New York USA - Monday, December 15, 2008 at 14:47:45 (EST)

---

I need my ring engraved in Ukrainian font by someone in the Cleveland area.
natalia mahlay <nataliabmahlay@yahoo.com>
hinckley, oh USA - Monday, December 15, 2008 at 11:22:31 (EST)

---

I have a 3mm ring that has little room on the inside. I'd like to find someone that could engrave on the outside of this ring... if not, as many letters as possible, on the inside. I'm not finding anyone in the Austin TX area for this. Help, please, this is very sentimental, as my fience died & I want my ring engraved. Thanks; Sherrie
Leigh <laketravislover@yahoo.com>
austin, tx 78734 - Wednesday, December 10, 2008 at 19:02:57 (EST)

---

I want to engrave a name on a Pool Cue (stick)
Stephen Morrill <smorrill1959@yahoo.com>
Raleigh, NC USA - Wednesday, November 26, 2008 at 12:22:45 (EST)

---

I work for an art conservation center in northwest Massachusetts. We currently need degree marks and numbers engraved on a replica brass meridian ring for a c.1810 terrestrial globe. I am looking for hand engrvavers in my geographic region. Please contact me for more information about the project.
Adam Nesbit <anesbit@williamstownart.org>
williamstown, MA USA - Wednesday, November 19, 2008 at 16:13:24 (EST)

---

I have one side by side shotgun i would like to submit to a student for engraving i will give the student license to create what he or she wants within my boundaries i want a retriever with either pheasent or duck being carried this is a very old gun and very valuable so if you need experiance for your portfolio this could help your career you must be enrolled in this school
Gary Rifat <garyrifat1@verizon.net>
santa monica, ca USA - Tuesday, November 18, 2008 at 00:05:19 (EST)

---

HI - I have a piece of jewelry that I would like engraved with my son's name and birthday. I am having a very difficult time finding someone who can do it by hand. Thanks so much!
Nia <yeseniag@gmail.com>
Saint Paul, MN USA - Sunday, November 16, 2008 at 19:37:13 (EST)

---

November 7, 2008 Hello everyone! I am looking for a very talented and experienced jewelry hand engraver to engrave an English-style coat of arms on a sheet of 14K gold. I would like someone who is currently free (or will be shortly available) to begin work as soon as possible. Please give me a call at (253) 851-0251 to discuss. Thank you! David Frohman
David Frohman <david2@spacerelics.com>
Gig Harbor, WA USA - Saturday, November 08, 2008 at 04:05:08 (EST)

---

I am looking for a high quality engraver, to monogram 10 Dunhill metal pens. I need this done by Novemeber 11th. Do you have anyone near here. Please write me back as soon as possible. Rebekah Bryant Sarnoff Court Reporters 877-955-3855
Rebekah Bryant <rbryant@sarnoffcourtreporters.com>
Irvine, CA USA - Wednesday, October 29, 2008 at 11:44:46 (EDT)

---

I am looking for artist to engrave the nickel silver bolsters (the metal things at both ends of a pocket knife) of a doctor's pocket knife, as a Christmas Present. Thanks, Brad
Brad <rinemb@sbcglobal.net>
Wichita, Ks USA - Wednesday, October 15, 2008 at 14:49:50 (EDT)

---

We require expereinced enrgavers who can engrave on gold sheets of 0.55mm thickness which can be enamelled lateron. We have very intricate designs to be engraved just like MOUGHAL INDIA so require skilled craftsmen.
vipul jain <info@alankritoverseas.com>
delhi, delhi india - Wednesday, October 15, 2008 at 04:10:13 (EDT)

---

I am searching for an engraver in Marin County, CA. I need to engrave a silver tray for a wedding. Thank you.
Robin <rbredtk@gmail.com>
USA - Monday, September 29, 2008 at 14:31:14 (EDT)

---

I'm building a Mauser 98 into a sporter configureation. I am looking for how much it would cost to get the bottom metal peice engraved. I want part of my family crest on there in gold, which is a lion with 3 stars above it (I have a hi-res pic), along with scrolls on the bottom metal. If anyone with experience that can give me a ball-park quote, I'd be very appriciated. Thanks.
Daniel <dangerdan87@gmail.com>
Carthage, TX USA - Friday, September 05, 2008 at 03:50:17 (EDT)

---

We're looking for someone who can do cost effective, on site bespoke engravings as part of a series of events. It would be small icons/designs and signatures onto stainless steal flasks. If anyone would be interested in something like this please get back to me, with ball park prices and examples of your work if possible. Thanks so much.
Keely <keely.guiliano@ays.co.uk>
New York, NY USA - Monday, August 25, 2008 at 14:00:08 (EDT)

---

I need a mans ring engraved with three lines all the way around like a music sheet and an Ab Minor meter running around it....in the south east michigan area....can anyone help???
Maria <mprovenz@oakland.edu>
Macomb, MI USA - Thursday, August 21, 2008 at 14:43:53 (EDT)

---

About 18 years ago I inherited some hand engraver's tools and never learned to use them. The engraving shop where I worked primarily used machines with one hand engraver who didn't have time to teach me. Learning to use them was a dream of mine but now with 4 children and a husband the time isn't there. I am ready to part from the tools. I need to inventory to see what I have. Where would I go to sell them?
Tina Rodriguez <trod1972@live.com>
St. Louis, MO USA - Monday, August 18, 2008 at 09:18:04 (EDT)

---

Need a recommendation for someone who can engrave monograms on silver trays. Thanks!
Susan Rogers <srogersla@msn.com>
West Los Angeles, CA USA - Thursday, August 14, 2008 at 13:47:35 (EDT)

---

i need to know if there is anyone in the Richmond va area who can remove and re-engrave a set of children's utensils. I woulld need this done soon.
dan <dpalese@royall.com>
richmond , va USA - Monday, August 11, 2008 at 15:07:01 (EDT)

---

I would like to have a picture frame or plaque engraved with Japanese characters. Can you help me locate ann expeienced person or company for the job? Thank you.
Eric Brooks <ericdbrooks@gmail.com>
charlotte, NC USA - Friday, August 08, 2008 at 13:34:39 (EDT)

---

I have two saxophones that I would like to have a name engraged on.
L. Johnson <Lcray762@aol.com>
Fayetteville, NC USA - Wednesday, August 06, 2008 at 08:11:11 (EDT)

---

Looking for someone who does hand engraving on gold bands in the Pittsburgh area. THANKS!
beth <barwench99@yahoo.com>
Pittsburgh, PA USA - Thursday, July 31, 2008 at 17:08:26 (EDT)

---

I need the phone number of any hand engravers in Montreal Quebec
debbie drake <debbie.drake@cogeco.com>
montreal, qc canada - Thursday, July 31, 2008 at 10:23:55 (EDT)

---

I need someone who can engrave acrylic and/or glass in new jeresy areas
Dave B <cabbassomedia@gmail.com>
USA - Tuesday, July 29, 2008 at 15:12:13 (EDT)

---

I am looking for someone to engrave a FIRE FIGHTER'S TRUMPET. It will need to be hand engraved on the bottom portion. I believe the stem can be done by machine. It is made of pewter, 19" tall, and 8" round at the base. If you GOOGLE "Images" of Fire fighter trumpet or bugle and find one from the 1800's you can get an idea...Don't get scared off though, my request of artwork is much simpler! I had one done 10 years ago by Pike Jewelers and he told me that it was the first and the last one he will do. He put a lot of time into it and it's beautiful, but now I need another one. I am looking for 2 small sections of scroll work and a fire fighter's scramble or an old steamer in the middle of the scroll work. On the stem I need possible olive leaves (or similar) going up about 4" on either side with name, rank and date in the center of the leaves. If you are that someone or you know that someone, please contact me!
ANGIE B. <LOOTYSWYF@MSN.COM>
MEMPHIS, TN USA - Tuesday, July 29, 2008 at 02:06:15 (EDT)

---

I need a 12mm tungsten ring engraved with 30 characters. I know in order to engrave on tungsten you have to have a laser engraver? I really want to add a speacial touch to this present so PLEASE help me! = ) thanks!
Sara <smp021@shsu.edu>
Huntsville, Tx USA - Friday, July 25, 2008 at 10:44:35 (EDT)

---

I NEED TO HAVE GOLD LETTERS TAKEN OFF OF A WESTERN SILVER BELT BUCKLE AND NEW LETTERS PUT ON....THEY ARE GOLD 1/2 INCH BY 1/2 INCH I LIVE IN SOUTHERN CALIFORNIA THANKS
MICHELE MARTINEZ <MMARTINEZ1@AQMD.GOV>
CHINO HILLS, CA USA - Thursday, July 24, 2008 at 17:55:28 (EDT)

---

I have two gold wedding bands that I would like to have engraved with Tengwar script. Thanks! (PS have already attempted ringdesigner.com, no response from them)
Duane Fitzhugh <novaguy1968@netzero.net>
Reston, VA USA - Saturday, July 19, 2008 at 16:45:50 (EDT)

---

need to have antique walking stick silver knob engraved for present.has to have old english style and look "old" when done, not freshly done.
mario carrandi <mfcarrandi@comcast.net>
belle mead, nj USA - Thursday, July 17, 2008 at 17:56:36 (EDT)

---

I need an emergancy engraving job today is it possible? Donnalee Kay Cameron Jewelers 631-567-1698
donnalee gray <donnaleegray@aol.com>
sayville, ny USA - Wednesday, July 16, 2008 at 11:22:26 (EDT)

---

I am looking for an accomplished engraver with experience in engraving firearms. I am a TV producer from Denver, Colorado, and Host of the Rocky Mountain Trails TV Show (you can check out my website at: www.afimediagroup.com). I am looking for new talent to feature on my show. I'm looking for someone who is really good, but who hasn't quite gotten his (or her) name out there yet. I have a sponsor gun that I would like to have engraved for the show. I would like to feature the chosen engraver and his (or her) work on my show in exchange for the engraving on the gun. I have two guns - you can take your choice of which one you want to do for the project - a Kimber Gold Combat Stainless II or a S&;W .460 XVR. Anyone interested in this promotional opportunity should be prepared to submit samples of their work and their concept for the project. Interested persons should contact me at your earliest convenience, either by email or by phone. My office number is: 303-663-9678.
Larry Lindsey <Larry@afimediagroup.com>
Lone Tree, CO USA - Tuesday, July 15, 2008 at 16:02:55 (EDT)

---

I am looking for an accomplished engraver with experience in engraving firearms. I am a TV producer from Denver, Colorado, and Host of the Rocky Mountain Trails TV Show (you can check out my website at: www.afimediagroup.com). I am looking for new talent to feature on my show. I'm looking for someone who is really good, but who hasn't quite gotten his (or her) name out there yet. I have a sponsor gun that I would like to have engraved for the show. I would like to feature the chosen engraver and his (or her) work on my show in exchange for the engraving on the gun. I have two guns - you can take your choice of which one you want to do for the project - a Kimber Gold Combat Stainless II or a S&;W .460 XVR. Anyone interested in this promotional opportunity should be prepared to submit samples of their work and their concept for the project. Interested persons should contact me at your earliest convenience, either by email or by phone. My office number is: 303-663-9678.
Larry Lindsey <Larry@afimediagroup.com>
Lone Tree, CO USA - Tuesday, July 15, 2008 at 16:00:46 (EDT)

---

looking for a leather engraver located in west palm beach florida to engrave
Bobbi Draper <Bobbi1759@aol.com>
Loxahatchee, FL USA - Monday, July 14, 2008 at 16:29:31 (EDT)

---

I'm looking for an engraver to engrave a leaf design on wedding bands.
Bob <dohnibor@alltel.net>
Houston, TX USA - Sunday, July 13, 2008 at 16:03:24 (EDT)

---

Need a hand engraver to engrave on a glass vase for our wedding
Brad McLaughlin <B_rad30@yahoo.com>
San Clenmentr, ca USA - Thursday, July 10, 2008 at 18:31:15 (EDT)

---

I would like to find an engraver near Austin who would be willing to teach the art of engraving to a silversmith with 30 years experience. I am interested in learning about traditional Texas patterns, tools and experts in the field.
Diana Kipfer <dkipfer215@earthlink.net>
Liberty Hill, TX USA - Thursday, July 10, 2008 at 14:42:41 (EDT)

---

I have bought my cake severs for my wedding and I need to locate someone who can put our names on them along with the date of wedding day.
shonda <shonda_21@hotmail.com>
dallas, TX USA - Thursday, July 10, 2008 at 12:08:15 (EDT)

---

I would like to have a love token engraved. The base coin will be a 1908 Half Dollar and what I would like to have done is the reverse planed off, then engraved with a pattern around the rim reminiscent of the Love Tokens of the late 1800s and an inscription (in script): Raymond and Kimberly September 27, 2008 Today I marry my best friend. The one I laugh with, live for, love. I would like to know if this can be done and at what cost. Also, what would be the turn-around time. Thank you! Ray
Raymond Roberts <raybob54321@yahoo.com>
Pittsburgh, PA USA - Wednesday, July 09, 2008 at 09:09:42 (EDT)

---

can anyone engrave a mother pf pearl disc? I will supply. Can it be customized with a picture of an animal?
danni <danniboucher@yahoo.com>
miami, fl USA - Monday, July 07, 2008 at 19:18:55 (EDT)

---

I have a sterling silver birth record spoon that I would like engraved. I have inquired at several jewelers and for some reason they or their hand engravers can't do the job. The only explanation that I have received from one was that the bowl was too deep.I don't understand this since this is a baby birth record spoon specifically to be engraved with information, date time weight name...Please help
fred hurlbrink <fredhurl_wha@yahoo.com>
brookfield, ma USA - Sunday, July 06, 2008 at 20:25:51 (EDT)

---

I am getting married this saturday July, 12th. Im in need of someone who could engrave on our cake server set. it will just be our names and date.
Melissa Bennett <missy_b87@yahoo.com>
Kearney, NE USA - Sunday, July 06, 2008 at 16:05:03 (EDT)

---

Good Day, I am looking for someone to engrave a couple of Jack Levin Folders i have, these are part of a collection of mine that i started a number of yr's ago for my daugther. NOT FOR SALE. I would like the person to have worked on knives before, i will allow TOTAL ARTISTIC FREEDOM. TIA Gregg Please reply to e-mail below TXLAZER@AOL.COM
Gregg Lane <txlazer@aol.com>
Katy , tx USA - Saturday, June 28, 2008 at 13:25:07 (EDT)

---

I need someone to engrave a name on a dagger sword, and I have 70 swords. thank you my number is 305-216-1810
Freddie colloca <collocamusic@yahoo.com>
miami, FL USA - Monday, June 23, 2008 at 12:05:47 (EDT)

---

I would like to find someone to engrave my son's name and phone number on his flute. Also, I would like an opinion on if such engraving actually helps a flute get returened if lost or stolen. Thank you , Gerry
Gerry Matsuno <gmats@sbcglobal.net>
ValleyVillage, CA USA - Thursday, June 19, 2008 at 15:26:01 (EDT)

---

I am looking for a contact to do hand engraving adding a monogram to a silver medalion necklace. Thank you.
Gail Fletcher <gail.f.fletcher@gsk.com>
Raleigh, NC USA - Tuesday, June 17, 2008 at 13:42:31 (EDT)

---

Hi, I really someone soon to engrave a few Sanskrit words on the outside of a Platinumband.
rina <tbasu1@yahoo.com>
piscataway, nj USA - Monday, June 16, 2008 at 20:40:06 (EDT)

---

Looking for someone who can custom-engrave a tag that measures approximately 1.25" by 3/8". This tag is for a jewelry line and will contain my custome logo. I expect to need an initial quantity of 250. I will provide the blank tags and the artwork. Thank you.
Jan MacKay <jana.vausten@gmail.com>
Round Rock, TX USA - Sunday, June 15, 2008 at 22:02:27 (EDT)

---

I'm looking for someone whom can engrave on 2 champagne glasses. The glasses were bought from pottery barn. Their Flute is long, and throughout the glass is fairly thick. All I want engraved on them is my future husband's & my name, and also underneath our wedding date. If someone can do this please contact me. Thank you!
Emanuela Di Maria <Emanuela1983@comcast.net>
Schaumburg, IL USA - Saturday, June 14, 2008 at 12:26:22 (EDT)

---

i would to konw how mach it will cost and how can we get it hand engraving i am strpping cars and motor
Dana <dee770@hotmail.com>
mami, FL USA - Friday, June 13, 2008 at 15:05:43 (EDT)

---

I'm having a very nice sterling silver braclet made for my daughter. I want "Banzai Girl" engraved on the outer surface of the braclet so the engraving needs to fit the aesthetic character of the piece. The inscription has a great deal of personal signifcance. I would like the engraving to use an asian style font.
Jim Medford <medfordj@peninsula.wednet.edu>
Gig Harbor, WA USA - Tuesday, June 10, 2008 at 01:14:52 (EDT)

---

Looking to engrave a polished Tungsten Carbide wedding band with a finely detailed graphics (finger print). 7mm wide. I suspect laser engraving required.
Tom Nielsen <tnielsen@pobox.com>
San Francisco, CA USA - Thursday, June 05, 2008 at 16:31:51 (EDT)

---

I need an engraver to put hebrew names on two sterling kiddish cups.
r Schulman <aree1@vici.us>
Boca Raton, FL USA - Wednesday, June 04, 2008 at 14:03:30 (EDT)

---

I am looking for someone to engrave or deboss a purple leather passport cover with a first, middle, and last name (preferably with white lettering) on a rush basis - same day preferred. I am located in Manhattan. Thank you!
katherine <kbaggett@gmail.com>
New York, NY USA - Tuesday, June 03, 2008 at 16:15:22 (EDT)

---

I have a few pairs of small wooden shoes that I just bought in Holland and I would like to get them engraved with people's names on them. Can anyone do that? I am more than happy to ship them to wherever since I can't find a place around my house that does that type of engraving. Thanks!
Ashley Fisher <afisher3@illinois.edu>
Naperville, IL USA - Monday, June 02, 2008 at 11:34:03 (EDT)

---

Looking for a hand engraver to engrave two copper wine enhancers. Because of dome shape, cannot be done by machine. Willing to ship, but need back in my possession by July 11th.
Patricia Wells <peckerwoodbc@frontiernet.net>
Whitmore, CA USA - Saturday, May 31, 2008 at 01:07:43 (EDT)

---

Would like to find someone to engrave a silver cup. Please let me know in DC area or Bethesda,MD Thanks Susan Abrams\
Susan Abrams <ca11900@aol.com>
Washington, DC USA - Thursday, May 29, 2008 at 06:48:41 (EDT)

---

i am looking at having some engraving done on a harley shovelhead motor. just certain parts. parts will be polished not chromed. thanks
brent woita <brent281@hotmail.com>
lincoln, ne USA - Tuesday, May 27, 2008 at 14:23:59 (EDT)

---

I am looking for a hand engraver to engrave the back of a silver tray with feet. Preferably in the Hickory, NC area.
Barbara Bush <theotherbarbarabush@yahoo.com>
Lenoir, NC USA - Tuesday, May 20, 2008 at 18:21:19 (EDT)

---

I have a new pocket watch with what appears to be a lasered insignia.I would like it cut. If interested give me a shout and I will email the photos. Thanks.
George Bassett <geo_bass@hotmail.com>
Portage, IN USA - Sunday, May 18, 2008 at 15:14:04 (EDT)

---

Hi, I am a competitive shooter in Florida and have two new pistols (revolvers) ready to be engraved. I am looking for something different than the traditional "western" patterns. I would consider partial nudes, or anything different. Because these are "tools" for me, they are not going to be show pieces, so coverage will only be about 50%. I would also like to turn the guns around fairly quickly. Please email if you are interested. Thanks
Dan <sixgunfun@msn.com>
Fl USA - Saturday, May 17, 2008 at 13:01:13 (EDT)

---

Hello, I am having a custom watch built. I am looking to have someone either engrave the dial or the side of the watch case with the word "COULTER" I have pictures of exactly what I want done. Many thanks! -Chris (661)706-6062 cecoulter@hotmail.com
Chris <cecoulter@hotmail.com>
Los Angeles, CA USA - Friday, May 16, 2008 at 20:36:26 (EDT)

---

I am looking for someone to hand engrave a 14mm rose gold half round band ring on the "outside" of the ring with my childrens names (3) and an endearment. I have had this done before on a 12mm band ring by lazer and although the placement is nice, the engraving is not rich looking. Thank you.
Colleen <bubbup@hotmail.com>
Vaughn, WA USA - Thursday, May 08, 2008 at 19:04:00 (EDT)

---

Hi. I'm looking for someone to engrave some words onto a Samurai sword. Nothing terribly fancy but nice. Thanks!~
mary <mhmccrary@aol.com>
baltimore, md USA - Thursday, May 08, 2008 at 12:38:55 (EDT)

---

I'm looking for someone to do engraving on a Samurai sword. please contact me asap. thanks!
mary <mhmccrary@aol.com>
baltimore, md USA - Thursday, May 08, 2008 at 12:33:38 (EDT)

---

I need 2 wedding bands hand engraved for wedding on 7/5/08...I am in Central CT...Please contact me via email with appx. price and turn-around time.
Matt <mstge@allstate.com>
Rocky Hill, CT USA - Thursday, May 08, 2008 at 09:41:06 (EDT)

---

I need a price for a gold whitetail deer 8 point buck in relief on a Winchester m/70 floorplate, also gold scroll framing the buck.
Steve Kozlowski <sovereignpocketcruiser@hotmail.com>
Watertown, NY USA - Tuesday, May 06, 2008 at 15:36:29 (EDT)

---

looking for engraver that can do symbols on an engagement ring. Squares, circles, triangles and such.
ben <benduke6@hotmail.com>
lansing, mi USA - Thursday, May 01, 2008 at 22:08:00 (EDT)

---

Looking for someone who can hand engrave a flute. Thanks, Mark
Mark D. Meyers <markm849@yahoo.com>
St. Louis, MO USA - Thursday, May 01, 2008 at 12:45:04 (EDT)

---

HI - looking for someone to engrave a saying into some walnut plank floor boards before i install them next month. Thanks.
julie wright <2juliewright@comcast.net>
Kentfield, CA USA - Tuesday, April 29, 2008 at 01:17:54 (EDT)

---

I'm looking for a company that can do engraving on leather. Would prefer someone in the Fredericksburg, VA area. We need item for gift presentation by mid-may 2008. Thanks!
Julie <julie.abell@usmc.mil>
Stafford, VA USA - Friday, April 18, 2008 at 08:27:23 (EDT)

---

Good afternoon. My son is coming home from Iraq in two weeks, and we are throwing a huge party for him. There will be many gifts for him when he arrives, including a dog tag we purchased for him online. However when we received the dog tag, the words "made in Italy" weren't engraved all the way through. Only the words "made in" need to be touched up. Would it be possible to send it to someone so they can just make the two words a little deeper? Seems like a rather simple job, so I am hoping that someone can accommodate our request. We would be willing to send it to you and pay for the return shipping as well. Could you please let us know if this is something you could do for us? Thank you for your time and courtesy. God bless you.
Gary <shambklyn@gmail.com>
Drexel Hill, PA USA - Wednesday, April 16, 2008 at 20:04:39 (EDT)

---

I duplicated my signet ring for my son. I have many talents including ivory and brass inlay, seemless venere splices and minute autographing but cannot hand carve the 1mm latin charachters in the scroll on top of his ring. My best friend in FL told me there should be several old masters whoa could help in the Atlanta area.
Ric Smith <FS100156@Yahoo.com>
Columbus, GA USA - Wednesday, April 16, 2008 at 13:15:21 (EDT)

---

I'm looking for someone who can engrave the inside of a Tungsten Wedding band with a date. I can travel anywhere in the North Dallas area.
David De Anda <ddeanda83@hotmail.com>
Sachse, TX USA - Friday, April 04, 2008 at 13:25:04 (EDT)

---

Looking for someone to engrave a name on a Seecamp pistol. Detriot area. Thanks.
Kerry W. Pytel <kwpytel@comcast.net>
GPW, MI USA - Wednesday, April 02, 2008 at 16:21:54 (EDT)

---

I am looking for someone who could do some scroll engraving work on ferrules for fly rods. An example can be found iat this link: https://i29.tinypic.com/2s84a4p.jpg The female end of the ferrule (shown) is about 2" long and 1/4" in diameter, the male end of the ferrule (not shown) is about 1/4" long and 1/4 " in diameter. Thank you.
Jim Brandt <canerods@cox.net>
Wichita, KS USA - Sunday, March 30, 2008 at 10:49:54 (EDT)

---

i have a pair of japanese hair cutting scissors that i would like to have engraved and possibly gold inlay as well as stone setting. if you can do part or all of this kind of work, please contact us at bubbaandsissy2003@yahoo.com or call (817) 428-2513 and leave a message. thanks patrick howell
patrick howell <bubbaandsissy2003@yahoo.com>
watauga, tx USA - Thursday, March 27, 2008 at 11:54:59 (EDT)

---

I need to find an engraver for Torrey Pines Golf Club, San Diego, who have a US Open Golf Trophy which needs updating. Any help appreciated
nicholas winton <nicholas.winton@btinternet.com>
UK - Tuesday, March 25, 2008 at 06:37:36 (EDT)

---

I have a stone that I would lilke engraved with names and dates and paw prints as a memorial stone for my pets that have passed away. I would like quotes for this work. I also have a large piece of granite that could be used too, but I'd prefer the stone. I'd like someone in Southern Ca so that I don't have to ship this heavy piece and pay shipping costs. The size of the stone is approx. 22x20
Cece Helmers <cchelmers@earthlink.net>
Garden Grove, CA USA - Monday, March 24, 2008 at 22:38:59 (EDT)

---

I am looking for a local hand engraver in Virginia Beach to engrave 3 Silver Birth Record Spoons. Please contact by phone 757-495-4904 as soon as possible.
Jeane Hansen <gr8kdz@cox.net>
Virginia Beach, Va USA - Saturday, March 22, 2008 at 09:46:26 (EDT)

---

i have a weatherby ultra light looking to have the floor plate engraved with deer head and some scroll work
frank trifaro <frankarcher49@hotmail.com>
farmingdale, ny USA - Friday, March 21, 2008 at 14:48:14 (EDT)

---

I am looking for someone who will engrave garden stones for employee gifts.
Maureen Womack <maureenw@dbhutah.org>
Layton, Utah USA - Thursday, March 20, 2008 at 11:55:43 (EDT)

---

Hello, I recently just bought a silver solid Jewish star and needed someone to engrave my Jewish name on it. If anyone knows an engraver please let me know, thanks
Alexis <akoval2@yahoo.com>
Syracuse, NY USA - Wednesday, March 19, 2008 at 21:17:45 (EDT)

---

I am looking for an engraver to engrave a message on one side of a glass mug and name on the other side. This is for my groomsmen in my wedding on 6-7-08. Please contact quickly.
Drew <drew_ries0486@hotmail.com>
San Marcos, Tx USA - Wednesday, March 19, 2008 at 19:41:00 (EDT)

---

Would like my Colt Gold Cup Trophy & Colt Gov't .38 Engraved with designs. I am located in the Dallas area 75227.
Alex <alexis0206@yahoo.com>
Dallas, TX USA - Tuesday, March 11, 2008 at 17:19:48 (EDT)

---

I am looking for someone/company that would be able to embose/engrave initials into a leather wallet. It is a gift so I am looking for someone who has experience in doing this type of work. Please let me know if you can recommend someone close or in my area of Richmond, VA. Thanks so much. My contact email is catherine.tomlin@carpenter.com
Catherine Tomlin <catherine.tomlin@carpenter.com>
Richmond, VA USA - Tuesday, March 11, 2008 at 08:45:13 (EDT)

---

My son will become a Master Mason (Masonic Lodge) on March 19/08 Looking for ideas or Masonic expressions or logos to have engraved on the inside of his Masonic ring I will present to him on that date. Thanks for any indeas or links.
Barrie Blake <jackie.blake@telus.net>
Maple Ridge, B.C. Canada - Monday, March 10, 2008 at 17:04:59 (EDT)

---

I'M LOOKING FOR SOMEONE TO HAND ENGRAVE THE OUTSIDE OF A GOLD BAND.
LORI MITCHELL <laurelei_ogl@hotmail.com>
queensbury, ny USA - Monday, March 10, 2008 at 16:54:47 (EDT)

---

Looking for prices and possible ideas for some light engraved designs on a white gold engagement ring.
Max Palmer <max.palmer@bicworld.com>
norwalk, ct USA - Monday, March 10, 2008 at 10:19:00 (EDT)

---

Need a fragrance bottle engraver for a store event on Mother's day.
jacque pardo <mimisan5@hotmail.com>
los angeles, ca USA - Saturday, March 08, 2008 at 14:52:12 (EST)

---

I am looking for some hand engraving on sterling silver flatware and tray.
loretta <lorettambg@aol.com>
bowie, md USA - Wednesday, February 27, 2008 at 18:34:12 (EST)

---

Looking for someone who makes quality name pendants, 14k gold, in Japanese Kanji script or similar. Area codes 562, 714, 949, 310, 323, 818, 909 all o.k.
H.E. Chamberlain <HEChamberl@aol.com>
Long Beach, CA USA - Wednesday, February 27, 2008 at 03:05:13 (EST)

---

Hello all. I am looking for an engraver to work on a couple pieces for a old safe (security box) I have inherited from my grandmother. I currently reside in Argentina and would favor someone locally, for obvious logistics, but would consider shipping the pieces, all things depended. Can anyone assist me in this query/search? Sincerely, Antonio
Antonio <antonio.lannes@gmail.com>
Buenos Aires, Argentina - Monday, February 25, 2008 at 14:40:39 (EST)

---

I have a a platinum engagement ring that I need specially engraved cursive italic fonts. Im offering to pay 300-400 dollar for the job in cash....Im located in los angeles, ca but can drive 40 min if you're somewhat close by. email me if interested: jcmiro@gmail.com
JC Miro <jcmiro@gmail.com>
Los Angeles, CA USA - Sunday, February 24, 2008 at 02:02:02 (EST)

---

I am looking for a scrimshander to do a whaling type action scene on what I think is a real whale's tooth. The tooth is approximately 4 inches long and has rounded ridges running its length. I bought the tooth at a flea market years ago so there are no papers or provenance on the piece. Is what I am asking legal and or possible? Thanks in advance.
Douglas E. Little <douglaselittle@cs.com>
Southbury, CT USA - Friday, February 22, 2008 at 13:11:19 (EST)

---

I am looking for someone to hand engrave an inscription on a watch as an engagement present for my fiance. It must be hand work, as the surfaces of the watch are both small and curved. I will need someone I can trust, as this is a very expensive watch. I would love to find someone in the area I could actually meet with. Thanks!
Millie <milliecc@gmail.com>
Sacramento, CA USA - Tuesday, February 12, 2008 at 20:34:16 (EST)

---

Looking for someone to engrave "Sugimoto" in Kanji on a cigar lighter. Thank you, Tony
Tony Cisneros <Tigre513@sbcglobal.net>
San Antonio, TX USA - Tuesday, February 12, 2008 at 16:13:51 (EST)

---

I am a Tiffany sterling silver collector. I am looking for someone to engrave a calligraphic "F" and the word "FIGGE" in Italic caps on my items.
Ward Figge <wfig26@gmail.com>
Park City, ut USA - Tuesday, February 12, 2008 at 15:36:48 (EST)

---

I'm a silver restoration specialist looking for a hand engraver of holloware and flatware. If your technique includes brite cutting and reproduction work of the absolute highest quality, I'd love to hear from you.
Jeffrey Herman <jeffherman@silversmithing.com>
Providence, RI USA - Tuesday, February 12, 2008 at 12:47:02 (EST)

---

I need to find someone in San Antonio who can laser engrave a picture inside a heart locket.
Christina Herrera <blue_odessa_lucky@yahoo.com>
san antonio, tx USA - Thursday, February 07, 2008 at 16:38:21 (EST)

---

Looking for hand engraver (no laser) for Macbook Pro laptops (mainly just small stuff like logos and possibly borders), iphones, and other gadgets. Any Oregon/Washington engravers?
Alex <alex@computer-choppers.com>
West Linn, OR USA - Monday, February 04, 2008 at 20:22:02 (EST)

---

I have this sterling steel pendant and I want my daughter's picture to be engraved in it. Can anybody do it?
Latoya Mitchell <lsm4684@yahoo.com>
bethlehem, Pa USA - Friday, February 01, 2008 at 18:18:26 (EST)

---

Looking for engrave receiver and/or stock on blank over/under shotgun
jim <oxygenheatfuel@yahoo.com>
Long Beach, CA USA - Friday, February 01, 2008 at 15:12:04 (EST)

---

brass copper carbon steel engravers and related costs
carl ross <ross@eagle.ca>
port hope, ont. canada - Thursday, January 31, 2008 at 13:12:45 (EST)

---

I am looking for someone who is skilled at engraving detailed family crests on a cuff link. This is a wedding gift for my fiance who is Scottish. Please let me know if there is anyone around preferably in San Francisco or San Jose area
Carola Bell <carola_bell@gap.com>
San Francisco, CA USA - Monday, January 28, 2008 at 19:54:24 (EST)

---

I'm looking for a used Lindsay AirGraver if anyone has one for sale. Thank you!
Melody <melodymoop@aol.com>
MD USA - Sunday, January 27, 2008 at 11:51:00 (EST)

---

Would like to engrave silver signet rings, possibly up to 6 different rings, I will have the artwork for each ring. Would prefer to work with someone in the North East, but artistry is more important than location. Also, the rings will be 'working' signets and used to seal wax, so engraving must be deep.
J. Zwahlen <zwahlen@gmail.com>
New Ipswich, NH USA - Friday, January 25, 2008 at 06:31:08 (EST)

---

I need to find a good hand engraver in San Francisco or Marin County for a sterling picture frame asap. Thx!
susan peterson <susanpeterson@officemax.com>
Sausalito, Ca USA - Thursday, January 24, 2008 at 13:45:10 (EST)

---

I am looking for someone to engrave some knives for me as gifts for my groomsmen. The knives are coming in slowly, and the wedding isn't till May, but I really need a price better than the mall with its' insurance fee for bringing in your own (not made in China) items. Please write 'GROOMSMEN' in the subject line, as I do not accept spam. Thanks
James Lackey <lackey5@marshall.edu>
Louisville, KY USA - Thursday, January 24, 2008 at 11:02:20 (EST)

---

I am looking for someone (preferably in Connecticut or New York) that can do colonial-style engraving on some pewter mugs. Thank you!
Mike <mgdice@charter.net>
CT USA - Monday, January 21, 2008 at 11:14:47 (EST)

---

I would like to get my nephew's initials engraved on a leather wallet in my possession. I live in Southern Marin County and work in San Francisco. Help?? Thanks. Peyton
Peyton Stein <peyton@steinhome.com>
Belvedere, CA USA - Monday, January 21, 2008 at 10:01:17 (EST)

---

I NEED A SMALL 4"X1" BRASS PLAQUE ENGRAVED FOR CUSTOMER. NEED IMMEDIATE RESPONSE. THANKS
C G ILIFF
FT. WORTH, TX USA - Sunday, January 20, 2008 at 10:16:01 (EST)

---

First I wanted to thank the many engravers that responded to my last add, I am now working wth some artists and I am happy! Newly, I am looking for a professional Scrimshaw arstist to work with me creating limited edition sets on Case XX Knives, Henckels, Schatt & Morgan, Bulldog, etc. I have a successful ebay site with over 2480 feedback and 100% positive. I have been in business for 2+ years and I am doing really well. I want to join up with a good artist who will create art on my knife handles and then we sell them on ebay and to my collectors. There is good income to be made. Anyone interested, send me an email with photos of previous or current work. Thanks, Jason
Jason Baker <anythingyouwantidrect@yahoo.com>
Hillsboro, OR USA - Friday, January 18, 2008 at 16:55:32 (EST)

---

Please give me some informations about hand engravers in Germany or Austria. Thanks and best regards!
Jack <fitstep_fitstep@yahoo.com>
Lapovo, Serbia Serbia - Thursday, January 17, 2008 at 07:39:55 (EST)

---

We are looking for an engraver, preferably in the Philadelphia area, to engrave two sterlingnsilver goblets with a line of Hebrew lettering and a small design (roughly the size of the letters) that matches the design on the foot of the goblets.
Jane Landes Foster <janelandesfoster@gmail.com>
Merion, PA USA - Monday, January 14, 2008 at 18:04:08 (EST)

---

I am looking for an Artsit who wants to team up with me and engrave art on knife bolsters or Scrimshaw. I have a thriving eBay cutlery business and want a new or experienced artist as a partner. There is a lot of inerest in this area right now for custom bolster work and the proffits are amazing. Let me know if you are interested. Jason
Mr. J. baker <anythingyouwantdirect@yahoo.com>
Hillsboro, OR USA - Thursday, January 10, 2008 at 17:49:07 (EST)

---

I am looking for an engraver who is capable of engraving a Japanese character onto my groomsmen's gifts. I am not sure what the gifts will be yet, but they will probably be something like a flask, money clip, or multi tool. Any takers?
Greg Pensinger <gpensinger@gmail.com>
San Jose, CA USA - Thursday, January 10, 2008 at 14:45:58 (EST)

---

Hi, I'm looking for someone who can engrave Japanese characters (Kanji) on a flask for my brother's 21st birthday next week. I hope someone can help me!!
Richelle Hassell <richelle.hassell@yahoo.com>
Los Angeles, CA USA - Sunday, January 06, 2008 at 21:27:53 (EST)

---

I am looking for work as an Jr. apprentice engraver for jewelry, metal, glass, and guns. I am looking to work for a company or with an individual branching out in business. I have had over 26 years of calligraphy experience with many clients. I have, as many people say, a "beautiful" handiwork with design skills for lettering and graphics. I specialize in Spencerian Script. I have people skills and good with sales. I need to base myself in the Dallas, Texas area, although open to travel a bit. (469) 656-1067
Karen Lawrence <kaileen1@hotmail.com>
Allen, Tx. USA - Wednesday, January 02, 2008 at 21:58:32 (EST)

---

Looking for an engraver in the Atlanta area who can engrave Sanskrit, preferrably Marathi dialect, on a man's wedding band. i need a contact name no later than April '08 so we can get started. Thank you!
Mandy <blinkie185@yahoo.com>
Peachtree City, GA USA - Friday, December 28, 2007 at 23:28:15 (EST)

---

I own my Great Grandfathers shotgun. made in about 1900. Some of the original lettering is getting thin and I wanted to try to find someone to deepen the existing lettering before I get it re-blued.
John Williams <mrprince@hotmail.com>
pensacola, Florida USA - Wednesday, December 19, 2007 at 19:52:11 (EST)

---

I am looking for someone who can engrave some deer tracks on a men's titanium ring. Will need it before February, 2008.
Julie Pecharich <jpecharich@gmail.com>
Mapleton, IL - Tuesday, December 18, 2007 at 18:41:59 (EST)

---

I'm looking for someone to engrave a few shot glasses for Christmas. I need somewhere that can engrave personal photos onto the glass. Thanks!
Ariel <abtrfli@yahoo.com>
Long Beac, CA USA - Tuesday, December 18, 2007 at 17:33:07 (EST)

---

I need to find someone close by that does engraving. I have a name plate that goes on a business card holder that needs a name put on it. Also a key chain that need something put on the back.
P. Adkins <aja3204@hotmail.com>
Houston, Tx USA - Monday, December 17, 2007 at 11:24:09 (EST)

---

I need a wedding ring engraved tomorrow 12/17/07 (Monday) or Tuesday morning 12/18/07. I only need the word "Promise" plus the name Pam engraved. Please contact me to the e-mail above as soon as possible. Thanks...
Umbe Cantu <umbe@rice.edu>
Houston, TX USA - Sunday, December 16, 2007 at 22:18:12 (EST)

---

We have to engrave our brand name on 35 Nos of metalic pen. Kindly contact.
Haneef <kmhaneef@gmail.com>
Bangalore, Karnataka India - Sunday, December 16, 2007 at 12:45:10 (EST)

---

Looking for a used Lindsay AirGraver. Thank you. melodymoop@aol.com
M. Reinecke <melodymoop@aol.com>
MD USA - Saturday, December 15, 2007 at 22:37:20 (EST)

---

Hi, looking for someone to hand engraver chinese lettering on my braclet. The engraving will go on the outside of the bracelet instead of teh inside. It makes it much easier to do and a little unique. Thanks
J Hill <jwhill@aglresources.com>
decatur, GA USA - Saturday, December 15, 2007 at 19:45:03 (EST)

---

I have a sterling silver baby cup I want engraved in script. Anyone in San Diego County?
Linda <linda31@aol.com>
San Diego County, Ca USA - Saturday, December 15, 2007 at 14:02:41 (EST)

---

I am lookign for someone to engrave a monogram into a leather passport cover
Donnica Copeland <donnica22@gmail.com>
marietta, GA USA - Wednesday, December 12, 2007 at 15:55:32 (EST)

---

I am looking for US engravers located in Northeast who can work on stones ( carneol, onix, bloodstone, etc.). It is to engrave coat of arms on several seal rings. Similar to what they do in Germany in Idar Oberstein.
gene <vontaube@verizon.net>
Boston, MA USA - Tuesday, December 11, 2007 at 13:39:18 (EST)

---

I am looking for an experienced wood engraver to engrave an owl figure and a name on a cigar box. Thanks.
Rachael Valdez <harvestmoongirl@gmail.com>
Campbell, CA USA - Thursday, December 06, 2007 at 10:24:27 (EST)

---

I have a brand new Gucci Collectible Watch I would like to get some phrases engraved upon the rear plate of. Looking for someone with equipment to do that. Thanks!
David Hall <racket_guy@hotmail.com>
Salt Lake City, UT USA - Wednesday, December 05, 2007 at 12:37:58 (EST)

---

I would like to have a picture frame engraved with Korean characters. "Forever Friends " I have the phrase printed out, but have been unable to looate a hand engraver in Raleigh NC.
Frank Kildea <kildea@bellsouth.net>
Raleigh, NC USA - Tuesday, December 04, 2007 at 14:28:06 (EST)

---

I just need my husbands wedding band engraved
dani <dandan72@comcast.net>
Denver, co USA - Monday, December 03, 2007 at 19:48:41 (EST)

---

Need hand engraving on antique silver cup. SFO Peninsula area.
Hank Polomo <HankPolomo@aol.com>
Mountain View, CA USA - Saturday, December 01, 2007 at 17:10:18 (EST)

---

I have sterling baby cups and porringers and I have a sterling ladies' brush, comb and mirror set. I there someone in the Atlanta area who does hand engraving? thanks!
Ethelyn Riley <ethelynr@charter.net>
columbus, ga USA - Wednesday, November 28, 2007 at 13:43:23 (EST)

---

I would like to get my husband's wedding band engraved. That's all!
Mary Woodruff <mdunger@simla.colostate.edu>
Fort Collins, CO USA - Monday, November 26, 2007 at 12:37:34 (EST)

---

I'd like to have two silver rings engraved with prints of our deceased son's foot/hand prints... we have molds, and photo prints of both. we'd also like them to alternate with the roman numeral 2... Please email if you are able to do this. We'd like to have these our wedding bands.
Mrs. Walker <info@thepatricecompany.com>
atlanta, ga USA - Friday, November 23, 2007 at 09:20:52 (EST)

---

I have a chrome 44 Desert Eagle. I would like the decepticon logo (Transformers) and the name MEGATRON engraved somewhere on the barrel. Hopefully gold inlay wouldn't be asking too much. Please contact w/ price--thank you
Carroll D. Brown <nardyboy2000@yahoo.com>
Baltimore, MD USA - Tuesday, November 20, 2007 at 11:51:18 (EST)

---

I would like to offer special items to the Equine community and therefore need to find someone who can do small (3/8" by 2") some smaller, some larger on brass plates that I can affix to leather.. I would like to find someone in the area that we can build a working relationship with . Never heard of Airgraver but it sound awesome.
Jeff <jmarsh@gemsofnature.com>
Marietta, Ga USA - Sunday, November 18, 2007 at 13:08:29 (EST)

---

Need someone to duplicate an F grade Lefever pattern on a bare Lefever gun, from my F grade sample; also to recreate the engraving on a Sauer hammergun that has been polished extensively, from photos.
Russ Gould <russ@canby.com>
Canby, OR USA - Friday, November 16, 2007 at 22:03:24 (EST)

---

I need four Christmas birth record ornaments engraved with time, date, name. The product is from Silverminegifts.com, procut # X-9144 . This is very small (only 1.25 inches high and 1.8 inches wide) and I need to know asap if somebody in Austin area could handle the engraving so that I can order these. Thank you.
Katharine Dalton <kjdalton@kjdalton.com>
austin, tx USA - Friday, November 16, 2007 at 12:55:12 (EST)

---

I need the outside of a mans white gold wedding band engraved with a superman symbol and the Elvis Presley TCB symbol. If possible? We are getting married in mid December. mandy_romero25@hotmail.com
Amanda Romero <mandy_romero25@hotmail.com>
Kewanee, IL USA - Wednesday, November 14, 2007 at 14:30:42 (EST)

---

I am looking for someone to engrave 100 julep cups with a 3 letter monogram> pleas elt me know if interested. thank you
ANF <anf1228@aol.com>
southern CA , CA USA - Monday, November 12, 2007 at 20:42:04 (EST)

---

Desperately need someone to engrave bride & groom's names and weddimg date on glass flutes. Wedding is 11/24/07.
Nancy <nancyl56@yahoo.com>
Pleasant Prairie, WI USA - Wednesday, November 07, 2007 at 21:41:45 (EST)

---

Looking for someone who can engrave in Hebrew for our wedding bands: "ahava" (in hebrew) on one and "raya" in hebrew on the other. Need it by February. Thanks!
Blake <apache_reg5@hotmail.com>
oceanside, ca USA - Tuesday, November 06, 2007 at 22:47:45 (EST)

---

Need initials engraved on sterling silver forks (8 dinner, 4 salad). Please contact me.
Mary Bean <marybean7@hotmail.com>
Old Chatham, NY USA - Sunday, November 04, 2007 at 19:41:58 (EST)

---

Looking for somebody to engrave a cross on the inside of a white gold wedding band. Preferably in the Austin area. Email contact information and pricing. Thanks!
Nicole <nikkile1@aol.com>
Austin, TX USA - Friday, November 02, 2007 at 13:28:50 (EDT)

---

I have a trophy that needs to be hand RE-engraved before it can be re-plated. The 24 letters (10 are capital letters) are faint and will be lost altogether in the re-plating process unless it's re-engraved first. I have a choice depending on engraver, plater and prices as to whether or not I can do this at all... the all volunteer organization's Board will have to approve of the expenditures prior to any work. I'd appreciate any information you could give me. Samantha Carlson 310-387-8005 Venice, CA
Samantha Carlson <wsasmb@hotmail.com>
Venice, CA USA - Sunday, October 21, 2007 at 17:51:51 (EDT)

---

I am an Interior Designer searching for an engraver to monogram a full set of vintage silverware purchased in France for a client. You may also call to discuss at 562/303.0152.
Melissa Van Zee <vanzeedsgn@aol.com>
Los Angeles/Seal Beach, CA USA - Monday, October 15, 2007 at 20:04:25 (EDT)

---

I am looking for someone who I would be able to hire for an hour and a half to engrave wine glasses at a wedding for me. Wedding is to be in March 2009. Please respond with information, pricing, etc. Thanks so much!
Francesca <fasanzana@yahoo.com>
Santa Barbara, CA USA - Monday, October 15, 2007 at 14:50:47 (EDT)

---

I am looking for a local GUN engraver in my area that engraves stock or barrels on rifles. I live in Los Angels county.
Jim Castle <jimcastle@earthlink.net>
Manhattan Beach, CA USA - Thursday, October 11, 2007 at 11:48:45 (EDT)

---

My sister is getting merried soon and she needs to engrave both her and her future husband name in a heart shaped charm. How much do you charge for engraving their name on it? Can u also suggest us someone that sell those charms in Houston TX. We need 550 of them to engrave with their names, that is how many people she is going to have at her wedding. Thanks Milena Russom
Milena Russom <monalisetta@yahoo.com>
Houston, tx USA - Wednesday, October 10, 2007 at 00:02:21 (EDT)

---

I am looking for someone to engrave 2 wedding bands with a small inscription. I need it done by mid-December. Email me @ tin252@aol.com if you can help me or know someone who can. Thanks.
Kristin <Tin252@aol.com>
Delray Beach, FL USA - Tuesday, October 09, 2007 at 19:47:05 (EDT)

---

Looking for engraver for pewter, silverplate boxes and charms.
Catherine Habermann-Cousins <catherinejc2006@yahoo.com>
Laguna Hills, CA USA - Tuesday, October 09, 2007 at 13:59:02 (EDT)

---

Hi, I'm looking for someone who can engrave brass name plates for old machines from a photograph. Ted Salkin 707 431-1944 printersnational@hotmail.com
Ted Salkin <printersnational@hotmail.com>
Healdsburg, California USA - Saturday, October 06, 2007 at 13:52:23 (EDT)

---

I'm looking for an engraver to do some scrolls and such things on some metal parts.
Eric <ithinkyournew@aol.com>
Miami, Fl USA - Thursday, October 04, 2007 at 21:41:45 (EDT)

---

I have an oval, medium size, 18 KT gold ring that I wish to have hand engraved with a script "B" or the Bowman family crest for my husband for our 25th wedding anniversay. Please contact with information , turn around time, shipping, and prices for engraving. The anniversary date is 11/21/07. Thank you so much, Ruth
Ruth Bowman <ruth@woodcroftonline.com>
Durham, NC USA - Tuesday, October 02, 2007 at 13:33:51 (EDT)

---

Wood Engraving: Looking for someone who can engrave onto wooden instruments. Might need this in bulk for a variety of instruments. Please email me at karanchopra@gmail.com.
Karan <karanchopra@gmail.com>
N Brunswick, NJ USA - Monday, October 01, 2007 at 17:27:32 (EDT)

---

I'm a talented and enthusiastic apprentice looking for a Journeyman picture/letter/gun engraver to show me the ropes in DC or MD. Thank you.
Melody <melodymoop@aol.com>
Washington, DC USA - Saturday, September 29, 2007 at 22:49:15 (EDT)

---

I bought a vintage brass fire exstinguisher for a motorcycle. its merly for looks. i would like someone to engrave scroll work all over it. as well as a set of brass knuckles engraved on it. there maybe some other parts i will need engraved depending on cost. feel free to contact me with any questions. thanks
Adam <burn353@yahoo.com>
raymond, il USA - Wednesday, September 19, 2007 at 15:18:57 (EDT)

---

Looking for someone who can hand engrave from English to Japaense using Japaense characters. The engraving would be on a wood surface. The message would be "Lord-Protect and Defend This Family"
George Shade <gshade@twmi.rr.com>
Farmington Hills, MI USA - Thursday, September 13, 2007 at 22:37:59 (EDT)

---

New Engraving Business just opened in the Cayman Islands (Caribbean) looking for a Hand Engraver willing to work in a beautiful Tropical Island. A once in a lifetime opportunity. E-mail samples of your work and resume to me immediately. Orders coming in are overwhelming me right now and Christmas is right around the corner. We are the only business like this on Island. Many requests that can't be filled right now. Talk to me soon
maxine Bryson <chrismax119@hotmail.com>
George Town, Cayman Islands - Wednesday, September 12, 2007 at 10:51:16 (EDT)

---

Thank you for this service. I have been given a 1and 1/4 inch round silver pendant. In the center is a clear circle to take an initial. I would like to put the letter "S" there. I will, of, course pay round trip shipping costs and the cost of the engraving. Hope you can do it. Many thanks, Sandra Miller croixlassie@aol.com
Sandra Miller <croixlassie@aol.com>
N. Miami, FL USA - Friday, September 07, 2007 at 13:31:50 (EDT)

---

I am looking for an engraver who can engrave Japanese kanji onto my husband's gold wedding band. Thank you.
Ida Pasternak <devil5care@netscape.com>
Myrtle Beach, SC USA - Friday, September 07, 2007 at 11:01:51 (EDT)

---

would like no know how to go about puchasing air engraver in south africa
Vic Flood <floodies@mweb.co.za>
gaeteng, sa south africa - Friday, September 07, 2007 at 05:59:47 (EDT)

---

Looking for an engraver to engrave 12 silver teaspoons and 12 silver tablespoons with a special font in the letter "H" to match some exisiting antique silverware.
Debbie Hinz <hinz5417@aol.com>
La Grange, IL USA - Thursday, September 06, 2007 at 14:37:20 (EDT)

---

i have a job.i am a joing glass engreving work.my expirions 8 year in glass filde.
jignesh patel <jignesh_p999@yahoo.com>
ahmebdabad, gujarat india - Saturday, September 01, 2007 at 08:41:55 (EDT)

---

I have a large stainless steel area i need letters about 1 1/2 tall engraved into. this could be brass if it had to be but I would rather use stainless
bill kuhn <bill@wmcinc.net>
alsip, il USA - Wednesday, August 22, 2007 at 15:08:19 (EDT)

---

I am purchasing a gold band for my husband (8mm wide) and I would like to have script engraving on the inside. Our anniversary is in a month. Is there anyone in this area that can help me out?
Bethany Sheehan <bethanymsheehan@gmail.com>
lansing, mi USA - Monday, August 20, 2007 at 14:13:10 (EDT)

---

I have a gold signet ring for my fiance, but am having trouble finding a jeweler in the area that would be willing to engrave his school seal in the ring, as it is not one of the store's generic illistrations. I am looking for someone who would be able to engrave the school's seal into the ring that I would like to give him as our wedding present.
Julie Dawson <jdawson@alumni.bowdoin.edu>
Arlington, VA USA - Monday, August 13, 2007 at 16:16:36 (EDT)

---

I have two toasting flutes, silver metal that I need engraved by August 24th, my wedding is August 25th, 2007. I live in Philadelphia and I am unable to find an engraver here. Please help!!!
Aaliyah <sppoeticdiva218@aim.com>
Philadelphia, PA USA - Sunday, August 05, 2007 at 13:30:45 (EDT)

---

I need someone to engrave on a rock that I brought back from my honeymoon in Colorado. If anyone is in the Chicago area, email me.
Sonia <sarkkelin@allstate.com>
Oswego, IL USA - Thursday, August 02, 2007 at 14:02:02 (EDT)

---

Please e-mail me if you are able to or know someone who is able to engrave on a silver bowl. The bowl is a perpetual trophy that needs a date and name added.
Jacquie <Jacquie.awardsofbrick@verizon.net>
brick, nj USA - Tuesday, July 31, 2007 at 16:23:48 (EDT)

---

Have 4 lowrider show cars... Updating for lowrider magazine car show in October..... Looking for engraver with custom bike or car engraving. Please Call 214-492-1300 and ask for Edward or email me at edward@a2zlimos.com
Edward <edward@a2zlimos.com>
Dallas, TX USA - Friday, July 27, 2007 at 15:36:14 (EDT)

---

I am looking for someone to hand engrave a single initial on 14 sets of silver flatware. If anyone can do this and are located within 3 hours of Washington, D.C. please contact me! Thanks, Amy
Amy Murphy <murphlsu@hotmail.com>
Washington, DC USA - Friday, July 27, 2007 at 10:53:41 (EDT)

---

We are in the golf trophy business and we have a need for hand engraving on silver trophies that have been used at a country club for years. These pieces Thank you.
Lou Chiera <lou@winnersawardgroup.com>
Southeast, FL USA - Thursday, July 26, 2007 at 16:23:17 (EDT)

---

I need a leather engraver to engrave something on a leather portfolio that I'm giving my husband as gift. But I need one ASAP, I want it to be done by Saturday 7/28/07 and today is 7/23/07. HELP!! Thanks! wfontus@bellsouth.net
Wendy Ariza <wfontus@bellsouth.net>
Miami, FL USA - Tuesday, July 24, 2007 at 21:00:45 (EDT)

---

I need someone to engrave LEATHER. I want to get my boyfriend something meaningful for our anniversary (he bought me a ring, but he wont wear a ring and i cant see him wearing a watch or any sort of jewelry or accessory) I decided to go with a wallet, but that's really not a meaningful gift. I want to have the date of our anniversary engraved on the inside of the wallet. Please get back to me as soon as possible, as the date is coming up very soon. Thank You
Allison <allimb9563@yahoo.com>
Cypress, CA USA - Monday, July 23, 2007 at 17:48:27 (EDT)

---

I need cufflinks hand engraved.
LaToya Goodwin <latoyajgoodwin@yahoo.com>
Atlanta, Ga USA - Monday, July 16, 2007 at 15:58:44 (EDT)

---

I need an engraver to make a love token. I have a friend who had one made for me and I think the engraver was located in Hickory or Hendersonville, NC. I'd like to use that person again. You will recognize your work - a unique piece that had Priceless Thoughts, a monogram, and Herman on the Edge. I hope to find you. If not, anyone who thinks they could do this (the edge monogram is very important), please contact me. Thanks!
Cindy Dee <josephwardlowrealty@msn.com>
Spartanburg, SC USA - Friday, July 13, 2007 at 10:43:21 (EDT)

---

can monograms be removed from 14kt gold watch,and new monogram replace it?or will gold be destroyed.respond soon even if you are not able to do work now,i am in no rush
sharyn <sharynwatt@sbcglobal.net>
fairfield, ca USA - Wednesday, July 11, 2007 at 23:44:01 (EDT)

---

I would like to have a ring engraved with a heart design all around the outside to match the one my husband has. Mine was lost and I haven't been able to find another one exactly like it.
celeste lovett <gozorrogo47@yahoo.com>
Ocala, FL USA - Tuesday, July 10, 2007 at 11:41:46 (EDT)

---

I have a client who wants to reproduce a signet ring with a crest that she lost years ago. She has provided a wax impression from the ring plus a print of the crest. I would like to have the carving done as a model, as she wants several rings in various metals. I need a price quote, and need to know if you will work from my cast carved signet, and if so, your choice of metal for engraving the model. Sincerely; Rick Hamilton
Rick Hamilton <dunstan@vineyard.net>
Edgartown, MA USA - Monday, July 09, 2007 at 11:19:15 (EDT)

---

The Chatfield High School Diamond Club is looking for someone to engrave bricks for their baseball field.
Bob Putka <rputka@msn.com>
Littleton, CO USA - Thursday, July 05, 2007 at 16:41:17 (EDT)

---

I have two crystal toasting flutes that I need to have engraved. Because of the shape I need to find a hand engraver in or around San Francisco. Thanks!
Kira <kagunther@gmail.com>
San Francisco, CA USA - Monday, July 02, 2007 at 15:08:59 (EDT)

---

I am getting married at the end of July and would like to engrave 10 wallets with initials to be given to the groomsmen and ushers. I'm having trouble finding someone that can do this for me. How much does something like that cost? thanks!
Melissa <vreemel@hotmail.com>
San Francisco, CA USA - Thursday, June 28, 2007 at 17:44:11 (EDT)

---

Are you a beginning firearms engraver interested in classic Englishh rose and scroll designs? Want something to practice on for a customer who understands your a beginner? I am a beginner at "assembling" muzzleloading rifles in the classic English target style, and am looking for an engraver whose skills will grow as mine does. Contact me, maybe our skills can grow together
Joel Axenroth <jaxenro@aol.com>
xxx, ma USA - Wednesday, June 27, 2007 at 18:04:56 (EDT)

---

I need someone who can engrave a square flute for my wedding in august. I dont know of any places in Boston, MA that do it.
Arron Pridgeon <Smooth8023@juno.com>
boston, ma USA - Monday, June 25, 2007 at 17:02:48 (EDT)

---

I was married in England in 1973. I moved to the USA in 1979. In 1989 my house was burglarised when I was having surgery and was told to leave all jewelry at home. I have been very sad about the loss of my original wedding ring. I never had a picture of it. I remember the design in my head. The ring was a very wide gold band, 5/8 inch . There were flowers called chrysanthemums engraved on it with leaves and vines. It would make an old lady who has been married for 43 years, very happy if I could find someone in Philadelphia or nearby who could recreate the design for me on a plain gold band.
Hyacinth Johnson <hyacinthjohnson1@yahoo.com>
Philadelphia, Pa USA - Saturday, June 23, 2007 at 21:59:51 (EDT)

---

Engraving needed on a regular, reliable basis for hand engraving urns and plaques. We use 1/2" letters, frequently black enamelled or oxidized, and periodically designs (masonic or shriner symbols, university emblems and the like). Normally we have 1-2 items per week. We are open to conducting business via mail, as long as it's cost effective and timely. Please contact me for more details.
Adam Horton <adam.horton@sci-us.com>
Seattle, Wa USA - Friday, June 22, 2007 at 12:12:00 (EDT)

---

I need an engraver for a S&;W model 41. I prefer bulino and banknote engraving, but I also like small/fine english style.
John <baranjhn@wirelessbeehive.com>
Tooele, Ut USA - Wednesday, June 20, 2007 at 15:35:04 (EDT)

---

I am a watch collector and restore chronographs from the 1940's to early 1970's. Some parts are impossible to obtain today. I need some parts engraved with the company name. Easy block lettering. Will email pictures for samples. You can contact me at jerry1867@hotmail.com
Jerry Zuniga <Jerry1867@hotmail.com>
Mission, TX USA - Wednesday, June 20, 2007 at 11:32:43 (EDT)

---

I just purchased an antique pocket watch for my husband and would like to have it engraved with the family name and potentially a leaf design or family crest on the back. I'm looking form someone within an hour or two of Jim Thorpe, PA.
Amanda <ink_well@verizon.com>
Jim Thorpe, pa USA - Tuesday, June 19, 2007 at 15:41:47 (EDT)

---

I am looking for someone to do some jewelry and trophy belt buckles
Cindy Walker <clwlaker61@yahoo.com>
Bonham, TX USA - Monday, June 18, 2007 at 16:16:55 (EDT)

---

I have built a 3" S & W 66-L roundbutt. I need to have it engraved. Only stiplulation is that it have 'Molly' on the backstrap. Let me know if you would be interested in this project. Thanks, Sean
Sean Walsh <Aimin2@Yahoo.com>
San Antonio, TX USA - Sunday, June 17, 2007 at 10:59:12 (EDT)

---

Need a nice italian shotgun receiver engraved with "Happy 50th, Dove Boys, Arrey, NM", in relatively small script. I'm at a loss to find s/o near area who can do it. Any help is appreciated! Thanks.
Steve Miller <lsmiller@uga.edu>
Athens, GA USA - Wednesday, June 13, 2007 at 16:30:41 (EDT)

---

I have my late husband's Buck Classic III knife, which is engraved with his initials on one side. I would like to have other initials engraved on the other side so I can give it as a birthday gift August 1st. It would be nice to find someone near my home, but I am OK to ship it.
Joan Forsyth <jf4movies@yahoo.com>
Costa Mesa, CA USA - Monday, June 11, 2007 at 22:32:12 (EDT)

---

WE ARE A LARGE GALLERY LOOKING FOR A HAND ENGRAVER WHO MAY BE LOCAL OR SOMEWHAT LOCAL TO THE AREA
MICHELLE <MGDEN@COMCAST.NET>
NORTHAMPTON, MA USA - Friday, June 08, 2007 at 09:49:15 (EDT)

---

I have inherited a set of gold cufflinks, on which I would like to have my initials engraved. -- Stephan
Stephan A. Schwartz <saschwartz@earthlink.net>
Virginia Beach, VA USA - Friday, June 08, 2007 at 03:16:21 (EDT)

---

i need a namee ingraved on aa pool cue and on a pool table the name has 10 letters to it its a partner of mine that passed away two weeks ago
david malcolm
pleasant hill, ca USA - Thursday, June 07, 2007 at 13:25:48 (EDT)

---

I need to have a cue ball (billiard ball) engraved for a friend for her birthday done on or before june 17th. 917-703-4874 thank you
alex skorupski <colestarproperties@yahoo.com>
new york, ny USA - Thursday, June 07, 2007 at 09:54:34 (EDT)

---

I need to have curved toasting goblets (silver plated) engraved, as well as the tray base for a unity candle
Jan Hoeft <imjlh2@aol.com>
Huntley, IL USA - Wednesday, June 06, 2007 at 15:48:41 (EDT)

---

I have had mint julep cups hand engraved for my son for 19 years. Now that high school graduation is here, the one good hand engraver I know has injured her hand and is retiring. I would be willing to mail my polished pewter things to you. I frequently have 14K gold vintage charms that I want buffed and re-engraved as well. I appreciate fine old hand engraving. Please contact me! thanks
Joanna Glaze <jglaze@swbell.net>
Kansas City, MO USA - Tuesday, June 05, 2007 at 19:11:19 (EDT)

---

Engraver needed to do scroll work on fly rod hardware/slip ring. Material is Silver nickel. miles@raisingcapital.com.
Miles <miles@raisingcapital.com>
Provo, UT USA - Monday, May 21, 2007 at 14:40:42 (EDT)

---

Looking for someone to engrave facing side of a motorcycle ignition box (approximately 4.75" X 4.5") in the firearm style (scroll work with black filled backgrounds) but with some specific design ideas that I would like to collaborate on the design. Please email me to discuss details, terms and timeframe. Thanks!
Brian Anderson <unicorn3@cox.net>
Irvine, CA USA - Thursday, May 17, 2007 at 18:37:04 (EDT)

---

I am looking for a person who is able to engrave the outside of a tungsten ring. Any kind of input is appreciated! It is a particular design that I am interested in. Any questions feel free to email or call at 804-366-1665. Thank you.
Laura Junod <ljunod79@yahoo.com>
Richmond, VA USA - Wednesday, May 16, 2007 at 23:07:15 (EDT)

---

I am looking for someone to engrave our wedding bands on the outside of the band?
Callie <cat844@sbcglobal.net>
Aurora , IL USA - Wednesday, May 16, 2007 at 20:58:15 (EDT)

---

I'm looking for an engraver or even a student / apprentice to engrave in the firearm style (all scroll work with black filled backgrounds) two vehicle door handles shaped like a half circle (5 7/8" x 3" Wide). These can either be metal sheet overlays or engraved directly on door handles. Thanks.
Gary Godby <ggodby@comcast.net>
Bealeton, VA USA - Saturday, May 12, 2007 at 22:03:38 (EDT)

---

Looking for an experienced engraver to engrave a brass snare drum. Have the floral scroll pattern ready and need someone who's had some experience with musical instruments.
Tom Freer <tommyfreer@aol.com>
Cleveland Heights, OH USA - Wednesday, May 09, 2007 at 19:10:44 (EDT)

---

I AM LOOKING FOR SOMEONE WHO KNOWS HOW TO EMBOSS /ENGRAVE INITIALS ON LEATHER. I HAVE ABOUT 13 PIECES THAT NEED EMBOSSING.
Patty <psantin@comcast.net>
Livermore, CA USA - Monday, May 07, 2007 at 02:02:49 (EDT)

---

Looking for an engraver capable of engraving Tolkien Elvish language letters onto 2 rings (have picture of what we want). Will need to see portfolio of other work first.
Ann <ann_onimous@shaw.ca>
Abbotsford, bc Canada - Thursday, May 03, 2007 at 14:29:27 (EDT)

---

Looking for an engraver in Northern California to engrave a small piece of aluminum in a Firearms kind of style. It's an area about 5"X5". Maybe great for a beginner. Thanks
Alan <wanaraz@comcast.net>
Vallejo, ca USA - Thursday, May 03, 2007 at 00:33:12 (EDT)

---

I'm looking for an engraver to engrave a silver pendent for me with a small picture which I will disclose to you when we discuss details. It's for an anniversary gift - please feel free to contact me via email at sunshinesparks@gmail.com if you are interested.
Sam <sunshinesparks@gmail.com>
Portland , ME USA - Friday, April 20, 2007 at 20:53:31 (EDT)

---

I'm looking for someone to engrave a ring that i bought. Anyone in this town?
Bekka <symply_me_frevr@yahoo.com>
Nampa, ID USA - Monday, April 16, 2007 at 19:09:20 (EDT)

---

I'm looking into engraving a 1911 pistol with department police patch artwork. It is a picture of a Native American chief with the departments name down the slide (done on both sides). Please contact me via email.
Keith <klang1@cinci.rr.com>
Mason, OH USA - Saturday, April 14, 2007 at 22:22:42 (EDT)

---

We are looking for an engraver (sand blast and/or laser) to engrave logos, monograms and text on our high-quality stemware and decanters. We are located in the western suburbs of Chicago.
Frederic Arnal <farnal@bestwineglass.com>
Elgin, IL USA - Friday, April 13, 2007 at 13:26:43 (EDT)

---

Hi, I'm looking for an experienced engraver to do some engraving on the titanium bolsters of my Custom Emerson CQC 8 folding knife. Kindly contact me at "nicklovesknives@gmail.com" if interested. Thanks!
Nicholas <nicklovesknives@gmail.com>
-/-, -/- SINGAPORE - Sunday, April 08, 2007 at 13:20:02 (EDT)

---

I am looking for someone to engrave an Antique Wax Seal. Preferably in the Philadelphia area. Please contact me via email. Thank you.
Greg Desrosiers <greg_desrosiers@yahoo.com>
Drexel HIll, PA USA - Saturday, April 07, 2007 at 23:33:54 (EDT)

---

I am the cosmetic manager at Dillard's at Firewheel mall and I am looking for an engraver or airbrusher to do fragance bottles. Please contact me at work- (972)496-4070 or on my cell at (214)392-3778.
Stormy Dubose <stormenta13@sbcglobal.net>
Dallas, tx USA - Saturday, April 07, 2007 at 22:37:27 (EDT)

---

I need someone in the Bay Area that can engrave on to a curved surface after it has been very thinly plated in gold or platinum. Please contact me for more details on the project. Thanks so much,
Ruth <rutht@jimmyjane.com>
San Francisco, CA USA - Friday, April 06, 2007 at 16:01:22 (EDT)

---

Large silver platter needs intials engraved in center. Have wast bowl with initials that customer would like to have copied.
Miller <geraldeen.miller@choosebroadspire.com>
Jacksonville, FL USA - Friday, April 06, 2007 at 08:49:21 (EDT)

---

Need someone in the local area of preferrably Schaumburg to Glenview, IL or in the Austin, TX area. They would need to be able to Engrave on Stainless Steel. More details to be provided upon initial response. Thank you.
Gilbert <gilly999@aol.com>
Mt Prospect , IL USA - Saturday, March 31, 2007 at 13:54:23 (EDT)

---

i need a curved thin wedding band engraved to match a existiong ring,
brett andrae <brettandrae@hotmail.com>
orangeburg, sc USA - Thursday, March 29, 2007 at 17:10:24 (EDT)

---

Need 3 initials engraved on a burl walnut eyeglass case - either in Manhattan or Monroe County (Poconos), Pennsylvania
Eileen <drgon@epix.net>
NY, NY USA - Thursday, March 29, 2007 at 15:36:37 (EDT)

---

Looking for an expert Jewelry Hand Engraver for ongoing work for a jewelry store.
Richard <richard@normal.net>
Northern Virginia, VA USA - Thursday, March 29, 2007 at 12:25:09 (EDT)

---

Need someone who can do some Custom Hand Stamping or Engraving on Stainless Steel.
Gilbert <gilly999@aol.com>
Mt Prospect, IL USA - Wednesday, March 28, 2007 at 11:53:44 (EDT)

---

Looking for a hand engraver in Ontario or nearby states that can engrave into a solid gold flute headjoint. Looking to get the lip plate and possibly crown engraved. Please let me know if you've had experience working on flutes before and send any pictures of previous work! Thanks in advance.
Ed <ed@nsio.net>
Toronto, ON Canada - Friday, March 23, 2007 at 11:51:50 (EDT)

---

Hello, I am in need of a hand engraver, who can do some scroll work on a Pulsar wrist watch, my husband also has a ruger single action pistol in S/S he would like engraved. thanks Paula
Craig Vitello <paulamarie10@hotmail.com>
lafayette, IN USA - Tuesday, March 20, 2007 at 08:10:38 (EDT)

---

I need the inside of our wedding bands engraved with initials & date. I also have a silver service for 12 I'd like either initials or a monogram (if that's possible) engraved on. I also have an old silver tray I might want engraved also, but I'm not sure with what kind of design, maybe a monogram or something ornamental.
Elle <tigerkarezza@yahoo.com>
Baltimore, MD USA - Sunday, March 18, 2007 at 14:09:11 (EDT)

---

I am looking for a sterling silver engraver located in Illinois (preferably North Shore based) to engrave approx. 120 sterling silver hearts with 8 letters on each heart. Looking for a specific font. Price needs to fit a required budget.
Lynn <madtor@aol.com>
Northbrook, IL USA - Sunday, March 18, 2007 at 08:44:35 (EDT)

---

I'm looking for an engraver in NYC to hand engrave a flask with iniitials.
michaelyn mitchell <mmitchell@afaweb.org>
New york, NY USA - Friday, March 16, 2007 at 19:47:31 (EDT)

---

Looking for an engraver who can engrave 7 silver napkin rings as well as 2 wedding bands for June wedding. Napkin rings are gift for bridal party and want engraved with first names. San Francisco Bay area/Sacramento area all o.k. Thanks.
Trish S <torch94591@yahoo.com>
Vallejo/Benicia, CA USA - Friday, March 16, 2007 at 01:15:45 (EDT)

---

I need someone to engrave my wedding band i just want the words "forever true july 30th 2005" engraved on the inside of the wedding band...Just let me know how much it costs and what i have to do to get it done oh and how long it will take...thanks Ocie Lowe
Ocie Lowe <rookielowe@yahoo.com>
Witt, Il USA - Thursday, March 15, 2007 at 21:47:15 (EDT)

---

Looking for hand engraver to engrave on gift items we sell when hand work requested
treetops <sharvogue@aol.com>
darien, ct USA - Friday, March 09, 2007 at 22:18:54 (EST)

---

Does anyone around Washington DC still do hand engraving on sterling flatware? There are many pieces and I would rather not ship. Thanks
Ann Robinson <annrob@verizon.net>
Washington, DC USA - Friday, March 09, 2007 at 16:50:16 (EST)

---

I am inquiring about an engraver to work with Argentium Silver. I need to find someone to engrave on 3 dog tags, both sides. It needs to be deep and very plain. I am just trying to find someone who could do it. Thanks
Douglas D <dd.klinglerjewelers@verizon.net>
Fort Wayne, IN USA - Tuesday, February 27, 2007 at 16:24:01 (EST)

---

I am looking for someone to engrave the OUTSIDE of our wedding bands with a little message near the corning area before june and information on how small the bands need to be. Thank you for your help!!
Nina <nene14864@yahoo.com>
Beaver Dams, NY USA - Sunday, February 25, 2007 at 14:30:18 (EST)

---

Hello; I am looking for someone to hand engrave a special plate for a wedding couple in San Francisco. Thank you Deanna
Deanna <andees1@earthlink.net>
San Francisco, CA USA - Friday, February 23, 2007 at 18:28:19 (EST)

---

I am looking for a hand engraver in San Francisco. Thanks!
Maggie <mcossma@yahoo.com>
San Francisco, CA USA - Friday, February 23, 2007 at 15:49:05 (EST)

---

Hello.... I was interested in having some engraving done on my saxophone. If anyone might be interested, please do respond. Thanks.
A. Leo Echazabal <ale12@humboldt.edu>
Arcata , CA USA - Friday, February 23, 2007 at 15:01:44 (EST)

---

i don enter guys.
MR.JOHN MUGU <john_mugu_guy@yahoo.com>
lome, togo - Monday, February 19, 2007 at 12:11:30 (EST)

---

We are searching for a hand engraver specific to the Jewelry industry but not limited; to join our family! I look foward to talking to you! Michele
Michele <michele@perrywinkles.com>
Burlington, VT USA - Friday, February 16, 2007 at 11:37:24 (EST)

---

Hello, I am looking for an engraver that will work on stone. I have available stone pieces that I can personalize a name, address, etc. Can you direct me to this item. It is not my main business so I do not want to invest thousands of dollars. Thanks, Pat
The Brass & Iron Bed Shop <thebrassandironbedshop@yahoo.com>
Plymouth, MI USA - Thursday, February 15, 2007 at 13:00:51 (EST)

---

I need a name engraved on two small gold lockets. I am looking for an engraver in the San Francisco Bay Area.
Deidre <dcmarcum@scif.com>
Berkeley, CA USA - Wednesday, February 14, 2007 at 15:14:19 (EST)

---

I need a 1911 stainless steel slide engraved with a 4 letter name. Thanks,
Jpanagopulos <jpanagopulos@oceaneering.com>
odenton, md USA - Tuesday, February 13, 2007 at 09:46:55 (EST)

---

Looking for an engraver that has worked with brass, and is available to do a Brass air / cleaner for a custom chopper build.. need quotes & how long of wait!!! Thank's
Vince W <vincfl05@aol.com>
Rockford, IL USA - Tuesday, February 13, 2007 at 01:45:29 (EST)

---

I'd like 3 initials engraved on a remington 1100 shotgun on the lower left part of the reciever. It would be fairly small and match the font already on the gun. Thanks!
Luke <klbspe@gmail.com>
Atlanta, GA USA - Monday, February 12, 2007 at 02:02:41 (EST)

---

I am looking to find an engraver who will do some scroll work for a wedding band. What I'm looking for is something like you see on many firearms except on a ring. I know it's possible but can't find anyone that does it. My fiance' and I are getting married next January so I've got a bit of time but am trying to get on the ball as far in advance as possible. Please shoot (no pun intended) me an email at NLStocks@gmail.com if you can or know of someone who could provide this type of work for me. I appreciate it.
Nathan Stocks <NLStocks@gmail.com>
Blacksburg, VA USA - Saturday, February 10, 2007 at 20:26:12 (EST)

---

KNIFEMAKER THAT NEEDS LOGO ENGRAVED ON KNIFE BLADES
G.P. FALOTICO <BAILSTAR@AOL.COM>
EMERSON, NJ USA - Saturday, February 10, 2007 at 15:06:28 (EST)

---

I am looking for a brick engraver in the Midland, Odessa Texas area for a high school booster club fund raising project. I can be reached via the email address above or at the following: japetro@cox.net or 967-3110.
Jeff Petro <jpetro@chevron.com>
Midland, TX USA - Friday, February 09, 2007 at 10:08:48 (EST)

---

I have a small signet ring that needs a simple sheath of wheat engraved. Thank you for your inquiry. Dale
Dale Staub <ddssathome@hotmail.com>
Litchfield , ct USA - Thursday, February 08, 2007 at 09:49:29 (EST)

---

Hello. Just wondering if you guys could engrave a couple of wedding rings for me and have them ready by March 1st? Do you guys do glass flukes also? How much would either set me back? Thanks a bunch. Please let me know...
Nikki <nikkipolish@aol.com>
Kilgore, TX USA - Wednesday, February 07, 2007 at 22:04:33 (EST)

---

I need to know of a place close by that can engrave the inside of a silver ring, perhaps has mens rings for sale..
Kimberly Lyons <klyons523@yahoo.com>
Long Beach, CA USA - Wednesday, February 07, 2007 at 14:10:52 (EST)

---

looking for hand engraver for gold jewelry in brooklyn ny
lily <lollie1@aol.com>
bklyn, ny USA - Wednesday, February 07, 2007 at 10:39:17 (EST)

---

I am looking for hand engravers to work on numerous items at a time. I own a pewter and silver wholesale company which features a flower of the month collection hand engraved on earrings, pendants, lockets, bracelets, money clips, cuff links, lapel pins, flasks, and frames. I also offer other "collections" and looking to expand the line and offer custom engraving. Experience preferred. Please email contact information to workshop@nobskacraftsmen.com.
Caitlin Rudders <workshop@nobskacraftsmen.com>
williamsburg, va USA - Saturday, February 03, 2007 at 13:25:30 (EST)

---

I am in search of someone to engrave nickel Fly Reel Hardware for custom built fly rods. Preferably someone in the southeast or Georgia to be exact to keep cost down for resale
Kevin Powell <kpowell@bensonmedia.net>
Canton, GA USA - Wednesday, January 31, 2007 at 13:44:00 (EST)

---

mugu live that site i have one igbada from there carry plast and die
Igbada <mugu@abamugu.com>
Eko, eko Niger - Wednesday, January 31, 2007 at 10:10:36 (EST)

---

1/25/07 I am a self-taught artist, and focus my work on silversmithing/engraving/design. I do very nice intricate work and detail. I am looking to relocate from Eastern Shore, MD to where I can work in a shop. Please contact me soon, I have a very nice scriptic design that I am talented with.
Mary Elizabeth Graff <Crypticchic1@yahoo.com>
Westover, MD USA - Thursday, January 25, 2007 at 15:24:10 (EST)

---

I have a sterling silver Tiffany Co. Man in the Moon Baby Rattle that I would like hand engraved with my son's name and date of birth. i prefer someone in manhattan. thanks
Christine Allen <acallen@gmail.com>
new york, NY USA - Friday, January 19, 2007 at 16:31:37 (EST)

---

I am looking for someone to engrave a zippo Lighter for me with Logo as well
Ken Porteous <the_deerhunter@ntlworld.com>
Glasgow, Scotland United Kingdom - Monday, January 15, 2007 at 20:59:26 (EST)

---

looking for a digital engraver, to put a picture of my daughter on to a pendant.i saw the beautiful pendant with the engraving of the dog on, its what i have in mind. please could you forward a link, to relevent engravers with web links. many thanks, mary hooper
Mary Hooper <maryhoope29@btinternet.com>
cardiff, USA - Saturday, January 13, 2007 at 09:46:31 (EST)

---

I have a silver pendant that I want initials engraved on the front and the saying "True friends are never apart, maybe in distance, but not in heart" engraved on the back, forming a circle on the back. Can't find an engraver close. Hope someone can help me out. Thanks.
Susan Leonard <susanwcp@sbcglobal.net>
Holland, MI USA - Thursday, January 11, 2007 at 14:15:42 (EST)

---

Looking for a HEBREW engraver, to engrave hebrew letters on several pendants - please let me know if you can help!
Lilach Feldman <lilach.feldman@gmail.com>
New York, NY USA - Tuesday, January 09, 2007 at 17:50:35 (EST)

---

I have a L.C. Smith Shotgun, that I would like to engrave. On the bottom with my name and the sides with scenery. You can contact me by e-mail or by phone at 586-801-9016
VIKTOR SHAHOLLI <viktor_shaholli@sbcglobal.com>
ST. CLAIR SHORES, MI USA - Monday, January 08, 2007 at 12:36:35 (EST)

---

I have a Roger Dubuis Watch that I am interested in having my nam engraved on the side. The watch is a Much More 56MM X 34MM in white gold.
Robert Golden <mercace2000@msn.com>
Patchogue, NY USA - Wednesday, December 27, 2006 at 11:21:44 (EST)

---

I'm looking for an Albrecht Durer (or a retired scrimshaw master) to copy-engrave from a photo (one of a selection of photos) of one headshot of two boys, one 3 mos., one 15 mos. onto a moneyclip for their grandfather. I can supply photoimages by email for quotation purposes. I would expect to supply the unengraved moneyclip, probably in sterling, purchased to engraver's specifications.
Phillip Martin <martinlists@cox.net>
Gainesville, FL USA - Thursday, December 21, 2006 at 15:28:01 (EST)

---

I need a custom picture engraved on a zippo lighter (I have the zippo). Can have picture to scale if necessary.
kate <kbroka1@uic.edu>
chicago, IL USA - Thursday, December 21, 2006 at 11:56:58 (EST)

---

i have bought a picture frame and i was wondering if you could by any chance ingrave a statment on the top... saying " I Love You Mom Always... " And if it could be done before christmas itself? thanks you best wishes please contact back
Tessa <xtessaleee@aim.com>
orleans, ma USA - Wednesday, December 20, 2006 at 18:29:08 (EST)

---

I am looking for someone who can engrave chinese words on a keychian. I can provide you with the chinese words I want to be engraved. I would appreciate it if it is done by February 10, 2007.
Aman <Amuna181@hotmail.com>
Paterson, NJ USA - Wednesday, December 20, 2006 at 17:36:29 (EST)

---

Desire hand engraving on watch to commemorate the graduation of my daughter from college. Please contact me by email: caugustine.ennead@yahoo.com or phone: 727 642-7605 Time frame is not important. We are willing to wait for a special service such as this. Thank you.
Camilla Augustine <caugustine.ennead@yahoo.com>
Tallahassee, FL USA - Tuesday, December 19, 2006 at 16:23:54 (EST)

---

I need someone that can engrave a logo on a flask and on a lighter, i have looked every where and can't find anyone!! i need it as soon as possible!! THANKS!!!!
Laura Cameron <lcameron@ecnime.com>
orlando, fl USA - Monday, December 18, 2006 at 14:50:34 (EST)

---

I am looking for someone to do an engraving on a business card case. Everyone I have called will only do initials or his name. I really want a simple picture of a microphone. I have a few simple pictures in mind that I can show you. It's for a Christmas gift for my boyfriend, but I do not need it by Christmas - he will be out of town with his family. Please e-mail me if you can help me out, or if you even know someone to help. I can't tell you how much I would appreciate it!
Danielle <dmaddox@gmail.com>
Austin, TX USA - Friday, December 15, 2006 at 19:16:24 (EST)

---

I need a silver wedding cake knife hand-engraved by January 13th. Help!
Catherine Kane <ckane@kanedesignstudio.com>
San Francisco, CA USA - Wednesday, December 13, 2006 at 19:30:36 (EST)

---

I have 2 X1911 .45s that I would like scroll scribed on the opposite side of the receiver from the manufacturers mark. Inscriptions should be: To My Friend Major Steve Julian, 310th PSYOP Tikrit Iraq 2006-2007, Thanks for serving with me, Major Ray Dunning The second pistol will essentially be the same but say To My First Sergeant, Billy Lambert I wouldn't mine a little scroll inlay or recommended ideas. I will purchase the guns once I have an engraver, and have them sent to you. I need them complete and sent for presentation by 20 MARCH 2007.
MAJOR RAY DUNNING <raymond.dunning@us.army.mil>
APO AE/IRAQ, USA - Wednesday, December 13, 2006 at 04:26:24 (EST)

---

I have three glass wine stoppers that I purchased for Christmas gifts. I am looking for someone in the Memphis, TN. or Little Rock, AR area to engrave one initial on each glass wine stopper.
Lindalu Hargraves <lulu5072342@yahoo.com>
Helena, AR USA - Wednesday, December 13, 2006 at 00:13:38 (EST)

---

I need an engraver to engrave 8 kanji symbols on a stainless steel wedding band. I want it on the top no the inside. HELP
Lisa Earl <learl@cray.com>
Maple Valley, WA USA - Monday, December 11, 2006 at 19:38:02 (EST)

---

I HAVE 2 POOL CUE , THAT I WANT IN ENGRAVER.
kyrie <kyriemoon@sbcglobal.net>
fort worth, TX USA - Saturday, December 09, 2006 at 01:43:04 (EST)

---

Looking to have a Buck model 500 Duke folding hunter engraved (not lazer etched) on one of the s.s. bolster areas with my Grandson's monogram. His name is Tyler Ray Dinsmoor and the letters T...R...D...are intertwined to form the monogram. This design has been used as a tattoo on myself and a rubber stamp for his childhood books. This will be his 12th Birthday present on Jan. 19th 2007. Any interested engravers ?
Mark W. Smith <marksimpulse@yahoo.com>
Grover Beach, CA USA - Friday, December 08, 2006 at 21:44:40 (EST)

---

i am looking for someone to engrave the wordJesus in english and in hebrew on a wedding band
Maged Nashed <mnashed@chla.usc.edu>
Moorpark, CA USA - Friday, December 08, 2006 at 01:04:57 (EST)

---

Looking for an artist to do some oak leaf type fancy work on a colt anaconda pistol... maybe a few other projects if the price is right. please put something about engraving in the subject line so i don't delete your email!!
Larry <selleod@hotmail.com>
lodi, ca USA - Friday, December 08, 2006 at 00:30:20 (EST)

---

I need a necklace ingrave that says savannah & Justin
Kimberly <savkimpat@earthlink.net>
grovland, fl USA - Wednesday, December 06, 2006 at 19:51:24 (EST)

---

I am looking for someone to engrave the mouthpiece on my daughter's flute. She is wanting something pretty - maybe flowers or some other fitting design.
Jo Ann Belk <csuramfans@msn.com>
Fort Collins, CO USA - Wednesday, December 06, 2006 at 13:18:50 (EST)

---

I am looking for someone who can engrave Korean characters onto about a dozen nickel plated keychains.
David Kang <Davidminkang@gmail.com>
Milwaukee, WI USA - Tuesday, December 05, 2006 at 17:13:36 (EST)

---

I have a metal resonator Ukulele which I would like to have engraved with a detailed rooster on the back. By Christmas 2006. I'm in the SF Bay area. Thanks!
Rick Z <ricardo.zegri@gmail.com>
Vallejo, CA USA - Tuesday, December 05, 2006 at 14:39:50 (EST)

---

i have a mens titanium wedding band i'd like engraved. need it by 12/10/06. thanks
pam <pamjeckell@yahoo.com>
brick, nj USA - Thursday, November 30, 2006 at 15:49:09 (EST)

---

I am looking for an engraver who is able to engrave my wedding bands with our names in Sanskrit.
KD <Kdolsingh@yahoo.com>
New York, NY USA - Thursday, November 30, 2006 at 15:01:15 (EST)

---

I need someone to engrave 10 pocket knives with initials. They are wedding presents for my groomsmen . The wedding is in early Jan, so I need it done pretty soon.
Jason Gaudreau <jasong95@msn.com>
Austin, TX USA - Wednesday, November 29, 2006 at 17:19:15 (EST)

---

I need someone to engrave the Great Seal of the Choctaw Nation on the derby cover of my Harley Davidson. The part is approx. 5" in diameter.
Lee Daggs <daggs_rhia@hotmail.com>
Mena, AR USA - Wednesday, November 29, 2006 at 12:10:47 (EST)

---

would like to have the side of a shotgun engraved for a birthday gift, i just picked it up this morning and need it back by COB Thursday 11/30/06. i just want a name and date engraved on the side.
Andrew Birch <abirch@solexcontracting.com>
Temecula, CA USA - Monday, November 27, 2006 at 16:28:47 (EST)

---

I have been trying to find a hand engraver to engrave my wedding rings. I want to have a small treble clef engraved on the inside of my ring and my fiance wants a bass clef on the inside of his. If there is anyone in Texas or even Oklahoma that can do symbols, I would really like to know. Thank you!
Geline
Dallas, TX USA - Monday, November 27, 2006 at 10:30:11 (EST)

---

I have a springfield armory model 1911-A1, I would like some custom engraving done. Some things I would like would be Skulls ,FTW,and a banner saying my last name. Thanks for reading Josh
Josh <bigjwamp@frontiernet.net>
Knoxville, TN USA - Sunday, November 26, 2006 at 19:23:50 (EST)

---

I'm looking to engrave the greek letters "Alpha Sigma Rho" onto a silver ring.
Wendy Chen <jingwenwchen@yahoo.com>
Austin, TX USA - Sunday, November 26, 2006 at 15:56:22 (EST)

---

I found this site accidentally and what a blessing it was. 12 > days ago I had to have my best friend put to sleep. She was a 9 1/2 year > old yellow lab/golden retriever mix. We were the best of friends, so this > loss has been extremely difficult. As a means of honoring our friendship > and love, I want to have a special ring made. I want to purchase a 10mm, > solid gold band (ring) and have some engraving done on it. Originally I > thought I would have the words "FOREVER TRUE "CHEROKEE" FOREVER FRIENDS" > wrap around the ring. I have had no luck locally finding anyone who would > do the engraving let alone find a carver. This site and the work > displayed on this site are works of art! Although I do not know you, I > am hoping you would be willing to help me find someone that can help me > create this memorial to my beloved Cherokee. I anxiously await your > response. Thank you in advance for any information that you can provide > me. Sincerely, Lisa Woog
Lisa Woog <wooger13@nisswa.net>
Nisswa, MNI found this site accidentally and what a blessing it was. 12 USA - Friday, November 24, 2006 at 20:27:40 (EST)

---

Is there anyone out there that could help me.....for christmas i bought my boyfriend a xx case knife, mother of pearl, im wanting my modeling picture on the handle, can anyone etch or engrave or w/e it is you call it to put my picture on the handle of a knife!!!!
Jen Boothe <hotchick159@hotmail.com>
Canaan, In USA - Wednesday, November 22, 2006 at 12:20:42 (EST)

---

I am looking for a local engraver who can do Cyrillic engraving for me on the back of an IPOD Nano I am sending overseas to Ukraine as a gift. Please contact me at: thigh@ebizbuilders.com if you can help with this need.
James Troy High <thigh@ebizbuilders.com>
Raleigh, NC USA - Sunday, November 19, 2006 at 14:29:54 (EST)

---

Anyone out there that can do a pigeon or diana pattern on a superposed 20 ga 2 barrel set? Thanks, -Colin
Colin Cooper <colin@browningcollector.com>
CA USA - Friday, November 17, 2006 at 12:54:38 (EST)

---

I am looking at putting a dream catcher on my new 629 mountain gun. what would this cost me. Thank You Earnest Harn
Earnest Harn <efhfishing@msn.com>
Nampa, ID USA - Thursday, November 16, 2006 at 20:19:27 (EST)

---

I have a large collection of W.R. Case & Sons knives and would like the Bolsters engraved. I am looking for someone who can do this for me on a regualr basis. I have small orders and large orders. Let me know. Jason
Jason Baker <anythingyouwantdirect@yahoo.com>
Canadian, OK USA - Tuesday, November 14, 2006 at 16:01:58 (EST)

---

I am looking for an engraver who can engrave 2 japanese kanji symbols onto dogtags as a present for a friend. Any help greatly appreciated, thank you.
David Byford <Davidxela@yahoo.co.uk>
Gillingham, Kent UK - Tuesday, November 14, 2006 at 11:54:54 (EST)

---

I have a pewter dumbell baby rattle to engrave a Monogram and birthdate THIS WEEK before Nov. 16!
Elizabeth Hill <elizabeth,hill@cox.net>
Centreville, VA USA - Sunday, November 12, 2006 at 20:26:26 (EST)

---

I have a locket I would like to engrave for my daughter. The engraving shop by my home said they coud not do it. I work in NYC and live in Westport CT. thanks
KBM <kbmcguinness@aol.com>
NYC, NY USA - Wednesday, November 08, 2006 at 11:53:26 (EST)

---

I need to find an someone who can engrave a few Korean initials on a silver dog tag necklace. I am able to provide the correct Korean letters and ship the necklace.
Roxanne Dorton <roxanne.seredni@wachoviasec.com>
Richmond, Va USA - Tuesday, November 07, 2006 at 11:48:31 (EST)

---

hi--seeking someone to monogram our Norstaal stainless flatware (Magnum pattern) with a good and deep(hopefully custom) F on the handles of anywhere between 10-50 pieces, depending on cost. we have 8 5pc settings and some misc serving pieces. future job possible if we expand our collection. thanks, Celeste
celeste <cefwedding@gmail.com>
cambridge, ma USA - Monday, October 23, 2006 at 13:10:12 (EDT)

---

Need experienced engraver who can engrave Chinese characters on piece of jewelry.
Kris <kraisiny@yahoo.com>
oakland, Ca USA - Sunday, October 22, 2006 at 20:47:45 (EDT)

---

Need someone to copy a design of an interlocked A&;M on cufflinks. Not too ornate. Thank you!
Anna <applesidor@gmail.com>
New York, NY USA - Monday, October 16, 2006 at 19:42:18 (EDT)

---

Looking for someone to engrave chinese symbols on cufflinks. thanks
christie <cstevens@lifetimefitness.com>
cary, nc USA - Saturday, October 14, 2006 at 21:48:40 (EDT)

---

Looking for someone to engrave traditional Western designs on sterling Ranger Sets.
john rippel <jrippelsf@ol.com>
santa fe, nm USA - Saturday, October 14, 2006 at 11:55:58 (EDT)

---

Engraver needed to engrave aluminum railing for memorial. Approximately 130 characters (letters) approx. 7/8" in height. Pennsylvania.
Joseph <buylla@hotmail.com>
pittsburgh, pa USA - Wednesday, October 11, 2006 at 15:24:03 (EDT)

---

Engraver needed to engrave aluminum railing for memorial. Approximately 130 characters (letters) approx. 7/8" in height. Pennsylvania.
Joseph <buylla@hotmail.com>
pittsburgh, pa USA - Wednesday, October 11, 2006 at 15:24:03 (EDT)

---

Engraver needed to engrave aluminum railing for memorial. Approximately 130 characters (letters) approx. 7/8" in height. Pennsylvania.
Joseph <buylla@hotmail.com>
pittsburgh, pa USA - Wednesday, October 11, 2006 at 15:24:03 (EDT)

---

Looking for experienced hand engraver for jewelry, picture frames and trophies. Thank you
John <Jow6@aol.com>
Stony Brook, NY USA - Tuesday, October 03, 2006 at 12:24:05 (EDT)

---

I really want to engrave the phrase "breakfast tastes good" onto an open hearted silver pendant, 3/4 of an inch in dimension. Is this even possible? They are the first words I ever said to my dearest friend, and her birthday is coming up.
Angel <legendarymansonite@sbcglobal.net>
sanantonio, tx USA - Monday, October 02, 2006 at 16:12:44 (EDT)

---

Hello, I have a wood stock from a Winchester Model 12 shotgun that was my grand fathers and I am looking for some inlay work. It currently has some of what I would guess is silver inlay remaining, but I would like to have it repaired and back to the way is was originally. The scene appears to be 3 Canadian geese. If anyone cold recommend someone for this work, that would be great. Thanks
Tom <baxter1000@aol.com>
Gold Canyon, AZ USA - Friday, September 29, 2006 at 17:31:55 (EDT)

---

I am an engraver - I am looking for an engraving job - I worked for Colorado Badge & Trophy in Denver, CO for 17 years until they went out of business - I worked 3 larger engraving machines called VisionPro - I am looking for a position in Denver, CO if anyone knows of an engraving job please send me an e-mail - thank you
Kathy <kstruna@comcast.net>
Denver, co USA - Saturday, September 23, 2006 at 13:07:14 (EDT)

---

I have a necklace charm that i need to get engrave with mine and my girlfriends initials and our date... is that possible? i can send a picture if needed to check.
Steve <Jr4013@yahoo.com>
Boothwyn, PA USA - Friday, September 22, 2006 at 22:12:18 (EDT)

---

We are a jewelry store located in Lansing, MI and we are lookign for someone to do some deep engraving on a silver medallion. Our customer has had us make a medallion in 925 silver 1 1/2 inches long and and 1 1/16 wide. In the centre of the medallion we have set a bezel, 10mm x 8mm. We need someone to either deep engrave or carve a celtic knot around the sides of the medallion. Thank you in advence.
Paul Veselovsky <jewelry@hampton-jewelers.com>
Lansing, MI USA - Thursday, September 21, 2006 at 14:45:25 (EDT)

---

I'm trying to get two rings engraved with tengwar script in or around Austin. Here's a JPG of what I was hoping to get: https://host573.ipowerweb.com/~jenni-ba/leannonguren.jpg Anybody know anyone capable? I'm willing to drive somewhat far if thats the only option.
Jenni <Jenni.bage@gmail.com>
Austin, TX USA - Tuesday, September 19, 2006 at 22:32:56 (EDT)

---

We are planning a Family Reunion. Memorial gift engraved. Approximately 25-35 items. It should read: McFadden Family Memorial Maryland 2008 I would like a price quote. Thanks.
Lualgia McLean <mae.watson@pillsburylaw.com>
Washington, DC USA - Tuesday, September 19, 2006 at 11:10:42 (EDT)

---

Can binder clips be engraved? Need to engrave a name on a binder clip.
Mary <schcakes@cox.net>
Lake Forest, CA USA - Tuesday, September 12, 2006 at 12:53:33 (EDT)

---

I am looking to have the inside of a ring engraved. Nothing terribly fancy -- continuous script and scrolling that makes a circle. It is just complicated enough that it cannot be done with blocks. The whole project is not urgent, but I would need a small part of it (2 3mm lines) done this week. Thank you for your time and help.
S.D.D <sal@ri.cmu.edu>
Mountain View, CA USA - Monday, September 11, 2006 at 17:19:08 (EDT)

---

I need a bronze medallion hand engraved with a date. I need it done quickly, like by this Saturday. Don't know if it's possible, but if there is anyone that can do it, please respond ASAP.
Shea McCright <pancho4jezzy@yahoo.com>
San Marcos, TX USA - Tuesday, September 05, 2006 at 10:07:20 (EDT)

---

need to have outside of a SS band ring engraved with the words "Harm None"... can not find a jeweler to here in florida, only will do the inside of band... please help... Thank You
debbie <meincontrol@bellsouth.net>
palm coast, florida USA - Tuesday, August 29, 2006 at 22:13:59 (EDT)

---

I saw an inquiry from a Tommy Taylor to help him create what will become fake Civil War ID disc's sold as real on e-bay. PLEASE do not comply as there are many collectors that are ripped off by fake items such as these for thousands of dollars. Below I have added his request: "I wish to engrave several silver dollars as id tags ca. 1860's. All work to be done on obverse. This would require removal of some lettering and engraving the person's name and unit (preferably in period script). All would have the same unit designation, so if you have multiple capability, good. Eagle to have "CSA". May be engraved or stamped. Are you interested in this project? Thanks Tommy Taylor"
A Concerned Collector <frankeeh1@yahoo.com>
Fishkill, NY USA - Tuesday, August 29, 2006 at 13:14:27 (EDT)

---

I'm looking for someone who can engrave a crest design (located at the URL listed) on a cigarette case. https://www.rmcleod.com/Pictures/crest.jpg
Jenny Jones <zarkingfardwark@hotmail.com>
Reno, NV USA - Tuesday, August 22, 2006 at 19:03:48 (EDT)

---

Looking to have large brass ships bell (15) engraved with the Marine Corps emblem on the front of the bell and about 50 letters around the lip of the bell.
Lew Breese <marinesgt@wideopenwest.com>
Naperville, IL USA - Monday, August 21, 2006 at 14:43:58 (EDT)

---

Hey, I was wondering if you could find me an engraver for a lighter near me. Thanks.
Catherine Cobb <qt9733@aol.com>
Collierville, TN USA - Sunday, August 20, 2006 at 14:44:42 (EDT)

---

Here's the link for the following message: https://www.onemanbandtv.com/trophy.jpg
Keith Wells <keith@wells.net>
USA - Sunday, August 13, 2006 at 13:57:01 (EDT)

---

I have a large bowl trophy (10" high, 9" diameter bowl-- 15" wide total with the handles) that I need hand engraved. The trophy was made in the UK in 1927 and is sterling silver. Click the link to see the trophy. I want traditional, period hand engraving done to make it look like a sports trophy that would have been handed out in the 1930's or 40's. Looking forward to your feedback! Keith Wells.
Keith Wells <keith@wells.net>
Victoria, BC Canada - Sunday, August 13, 2006 at 13:55:52 (EDT)

---

I need to rings engraved on both the inside and out with non-alphabet symbols. My wedding is in Feb of 2007. So I need this done before then.
Michaeal <Michaelnemoomen@yahoo.com>
CA USA - Friday, August 11, 2006 at 14:33:34 (EDT)

---

I need to have two wedding bands, 10K gold, engraved in Icelandic (the letters that seem to pose a problem to the machine engraver are þ and ð). One is 3mm, the other is 6mm wide.
Keri <kerielam@gmail.com>
Chicago, IL USA - Wednesday, August 09, 2006 at 14:04:37 (EDT)

---

I have two knives with Jerry Rados damascus bolsters that I would like inlayed with gold designs. Please email me if you are interested in the project. Thanks
Matthew N <mnweb@swbell.net>
Houston, TX USA - Monday, August 07, 2006 at 20:20:50 (EDT)

---

I need 2 rings engraved with names and dates one is 3.5mm the other is 2mm. Both are platinum.
Richard Stafford <hs101rjs@hotmail.com>
Austin, Tx USA - Monday, August 07, 2006 at 12:20:57 (EDT)

---

I have 6 sterling spoons that I would like engraved with my 3 initials - hand engraved
helen m. vogt <hmvogt@verizon.net>
Port Washington, NY USA - Saturday, August 05, 2006 at 15:12:25 (EDT)

---

Need an engraving on a beautiful sterling celebration cup for my in-laws 50th wedding anniversary. Names and dates only. Thanks, Michelle Contact me at jmmking@comcast.net
Michelle <jmmking@comcast.net>
Bay Area, CA USA - Friday, August 04, 2006 at 17:17:46 (EDT)

---

1956 FERRARI GEARSHIFT KNOB MADE OUT OF ACRYLIC NEEDS TO BE HAND ENGRAVED WITH ROMAN NUMERALS 1-4 AND THE LETTERS RM .
James O'Brien <deesideshop@AOL.COM>
Reno, NV USA - Tuesday, July 25, 2006 at 17:52:06 (EDT)

---

I have a signet ring that I would like to have engraved with the Sargent coat of arms.
R. Sargent <deljoe1@aol.com>
Boston, MA USA - Thursday, July 20, 2006 at 21:44:47 (EDT)

---

WANTED: Engraver to engrave a Custom Knife. 6AL4V handles (I know this is not an engravers favorite material and a price increase would be expected). I would like to have a knife engraved for the Plaza Cutlery Evening of the Arts show in October. The theme is to have them engraved like an old WWII bomber with panels and rivets and a pin up girl portriat for some "Nose Art" I have had this theme engraved before, a example of this is on my website www.galyeancustom.com in the gallery. Get in touch if you would like to take on the job. Thanks! Tim Galyean
Tim Galyean <tjgalyean@hotmail.com>
Newberg, OR USA - Thursday, July 20, 2006 at 01:10:38 (EDT)

---

unique collabration project between a car manufacturer and fashion company. i need to engrave a few details on the car. we can send the parts. need someone with the skill of mr. lindsay for the embellishing detail. please contact as soon a possible... kdevine@ecko.com
Kevin <kdevine@ecko.com>
new york, ny USA - Wednesday, July 19, 2006 at 10:47:56 (EDT)

---

I need to engrave hebrew designed letters on ivory. I am in new york city
jack bennny <elitecasting@yahoo.com>
nyc, ny USA - Monday, July 17, 2006 at 01:34:53 (EDT)

---

I need to engrave hebrew desgned letters on ivory. I am in new york city
jack bennny <elitecasting@yahoo.com>
nyc, ny USA - Monday, July 17, 2006 at 01:34:02 (EDT)

---

I need an engraver that will engrave my fiances titanium wedding band. The jewelry store told me that they will not engrave titanium bands. Thanks, Katie
Katie <moylan27@yahoo.com>
Naperville, IL USA - Wednesday, July 12, 2006 at 15:56:08 (EDT)

---

I am looking for someone to engrave an ID bracelet with a medical alert symbol & medical info. The medical alert symbol I want done is a custom design that I have, so it would just need to be copied onto the bracelet. Thanks for your time.
Tina <christina@wedographics.com>
Yorba Linda, ca USA - Tuesday, July 11, 2006 at 13:40:01 (EDT)

---

NEED TO PUT JUST ONE NUMBER IN EACH MAHJONG TILE MADE OF PLASTIC. SIZE 38MM HEIGHT X 28MM WIDE X20MM THICK. NUMBERS ARE 1-9 OR 1,2,3,4,5,6,7,8,9 size about 3/16 to 1/4" just one number per tile. Quantity 72 to hundreds of tiles depending on price per marked tile. ENGRAVERS WITH MACHINE IS ALSO OK FOR CHEAPER PRICE SPECIALLY IF VOLUME IS MAXIMIZED. Thanks for replying
CESAR DACASIN SR <c_dacasinsr@yahoo.com>
Vallejo, CA USA - Thursday, July 06, 2006 at 17:40:16 (EDT)

---

MEDICAL BRACELET READS "1943" INSTEAD OF "1948". I NEED THE "3" CHANGED TO AN "8". ALL IT NEEDS IS TO SMALL LINES TO FORM AN "8". IT WOULD BE GREATLY APPRECIATED IF THIS COULD BE DONE SOON AS IT IS A MEDICAL BRACELET WHICH IS VERY SIGNIFICANT. THANKS A MILLION.
LEEN <FOR_PG@hotmail.com>
vancouver, BC CANADA - Thursday, July 06, 2006 at 17:38:28 (EDT)

---

i am looking for someone to hand engrave 5 golf clubs....small initials. not a tough job. thx
michael revlock <revcorp@excite.com>
malverne, ny USA - Thursday, July 06, 2006 at 13:12:18 (EDT)

---

I am looking for someone to engrave a 60-piece set of sterling flatware with a single script initial. The flatware pattern is Towle Old Newbury, and the initial is an S. Anyone out there interested?
Kristina Szurkus <kszurkus2002@yahoo.com>
Pensacola, FL USA - Wednesday, July 05, 2006 at 19:34:37 (EDT)

---

Am looking for someone to engrave a fox head on a pocket watch.
Marcia Fox <mfox@gracechurchyorktown.org>
Yorktown, VA USA - Friday, June 30, 2006 at 13:57:57 (EDT)

---

does anyone out there in engraving land have time to do a 1911 for me? if you can work it in please email me and we will talk... thanks in advance
mel <moparmel@gvtel.com>
mn USA - Friday, June 30, 2006 at 12:05:58 (EDT)

---

I am interested in having a metal smith skilled in engraving craft a ferrule for a walking staff for me. The kind of metal is not an issue. Would love the engraving to be Celtic. I need an end cap and ferrule to fit onto the bottom of the walking staff and then a ring to fit around the top engraved with a design similar to the one on the ferrule at the bottom. I have searched the web for ferrules and all I can find are small and plain. I want something special for this staff. Thanks so much for your time.
Tammy Emon <magiraven@yahoo.com>
Saint Francis, MN USA - Wednesday, June 28, 2006 at 20:11:30 (EDT)

---

i HAVE A 1911 i WANT ENGRAVED. ANYONE OUT THERE GOT SOME TIME TO DO ONE FOR ME????
mel bohnenkamp <mel@moparmel.com>
fertile, MN USA - Monday, June 26, 2006 at 22:52:31 (EDT)

---

I am interested in engraving Judaic motives on silver cups. (Thick ones). I am living in Israel.
I. Shachar <israels@012.net.il>
Netanya, Israel - Monday, June 26, 2006 at 15:37:36 (EDT)

---

I need someone that can engrave my name on a necklace charm but wanted it done in the Chinese symbol for Angela or Angie. I have the symbol just cant find anyone to hand engrave.
Angela <avaughn3@yahoo.com>
Marietta, Ga USA - Saturday, June 24, 2006 at 12:25:13 (EDT)

---

I need to have mine and my fiance's names engraved in our future wedding rings, and i need it engraved in HEBREW.... Can anyone help me find an engraver in the Los Angeles area?
Ortal <ortalmoyal@yahoo.com>
Los Angeles, CA USA - Saturday, June 17, 2006 at 18:53:56 (EDT)

---

I need someone who can engrave the 3 names of my children on a pair of cufflinks. I would like one cufflink to have all 3 names and the other to match. The first name is 6 letters, second is 7 letters and the third is 7 letters. Font does not matter. Please respond as quickly as possible, as I was looking forward to giving my husband these for Father's Day. Thank you.
Shannon Starks <sstarks02@yahoo.com>
Memphis, TN USA - Tuesday, June 13, 2006 at 22:53:57 (EDT)

---

Looking for someone that can engrave inside ring inscription, on tension mount helix type wht gold engag ring. 27 chr string (including spaces) any font.
Chris <sig5534@hotmail.com>
Portland, OR USA - Monday, June 12, 2006 at 14:46:25 (EDT)

---

I'm looking for someone who can engrave the interior of platinum wedding rings in a sans serif style (e.g., Arial), in all lowercase letters (and some numbers). Thanks!
Jennifer Poirier <jlpoirier@earthlink.net>
Berkeley, CA USA - Thursday, June 08, 2006 at 19:40:17 (EDT)

---

I have a sterling wedding cup that we need engraved for my daughter's September 9, 2006 wedding all I need is the couples initials and wedding date. The font must match the other two sets of initials on the cup. If anyone can help please e-mail me ASAP. Thanks.
Cindy Land <cindycat@aol.com>
Gambrills, MD USA - Thursday, June 08, 2006 at 13:19:14 (EDT)

---

I have a few metal tattoo machines that I would like to get some random engraved flourishes on. Anyone in the Vancouver BC area with some leads would be greatly appreciated. thanks for your time, Greg
Greg G <geez@hundredproof.com>
Vancouver , BC Canada - Thursday, June 08, 2006 at 00:35:11 (EDT)

---

I need someone to engrave a watch
John
USA - Monday, June 05, 2006 at 12:49:05 (EDT)

---

I am looking for an experience engraver, I have an old locket, I would like to reuse for my family the antique locket has another name on it I would like artistic scrolling to cover original engraving and apply my grandson name above thank you
Valentina <usaloveusa@aol.com>
Trinidad, CA USA - Monday, May 22, 2006 at 12:49:00 (EDT)>

---

Item: Round silver teething ring in Birmingham or Ann Arbor area
C. West <cannwest@comcast.net>
Northville, MI USA - Thursday, May 18, 2006 at 19:27:22 (EDT)

---

I need a ring engraved either on the outside band or the on the raised crest sides; w/ either three initails or a school name of 13 letters and 3 spaces. need by august. thanks
Dee <deirsebasti@aol.com>
ledyard, ct USA - Tuesday, May 16, 2006 at 09:58:17 (EDT)

---

I am looking for an engraver who has the time and capabilities to engrave a family crest onto a pocket watch. Also interested in an estimation although I know how difficult that can be. Please contact me with information. I have flexible dates for the finished project.
Heather Martin <Volleyballque29@hotmail.com>
OH USA - Saturday, May 13, 2006 at 23:09:47 (EDT)

---

I have bought a ring with a dragon design around the outside as a gift and it is absolutely perfect for his personality BUT I cannot find anywhere that engraves inside of rings that are not purchased from them. I would love to complete this gift with a short message on the inside of the ring and assumed it wouldn't be that hard to send it somewhere, get it engraved, and sent beck to me. If anyone has any info that could help, please get a hold of me a.s.a.p. Thanks so Much!
Angel <xoxobabygurlxoxo1224@yahoo.com>
Kansas City, MO USA - Friday, May 12, 2006 at 15:13:33 (EDT)

---

I am looking for a leather engraver to engrave initials into a lather money clip
Alanna Walsh <mawalsh@cox.net>
Lakewood, OH USA - Tuesday, May 09, 2006 at 14:36:24 (EDT)

---

need silver napkin ring engraved. name or monogram on outside.
jolie markus <jmarkus@comcast.net>
bethesda, md USA - Monday, May 01, 2006 at 17:17:33 (EDT)

---

Hi. I'm looking for someone who can engrave some japanese characters onto a tag or something similar as a gift for my fiance. I'm having a terrible time finding someone who can do this for me. Can anyone help a poor girl out?? Thanks.
kimberly <kimberlyk21@hotmail.com>
edmonton, ab canada - Monday, May 01, 2006 at 11:19:11 (EDT)

---

I am looking to have some wedding bands engraved in chinese. There are only 3 symbols to each ring. Thank you....
Samantha Beck <Samantha.Beck@averydennison.com>
Ashtabula, OH USA - Thursday, April 27, 2006 at 11:55:54 (EDT)

---

I am looking to have the keys of my flute engraved. I was told it is also known as Chasing. The Flute is sterling silver.
Heidi <ladyxkalibar@netzero.net>
NY USA - Wednesday, April 26, 2006 at 11:54:23 (EDT)

---

I am looking for an engraver that can engrave a penguin and possibly a panda bear on the inside or the outside of a wedding band. Nothing very descriptive, just something simple. Wasn't sure if it could even be done, but at least I asked. Thank You.
Nicole <raindrop8404@yahoo.com>
Averill Park, NY USA - Monday, April 24, 2006 at 21:14:02 (EDT)

---

I am looking for someone to engrave a fly reel seat and ferrules similar in style to the one at the following link: [link=https://www.mwreynolds.com/HTML/rodwhiteheadtravel.html newwindow]Sample[/link]. If you are interested and have the skill, please contact me.
J. Brandt <canerods@adelphia.net>
Fontana, CA USA - Saturday, April 22, 2006 at 23:48:48 (EDT)

---

I have a very old 19th century pocket watch in excellent condition that I would like to have engraved with my fiance's initials and our wedding date. The wedding is May 7th, so it would need to be done in the next 2 weeks or so. I have tried every jewelry store in the Dallas-Fort Worth area and no one has been able to help so far. Thanks,
Lauren McMullen <lhmcmullen@yahoo.com>
Fort Worth, tx USA - Thursday, April 20, 2006 at 13:54:24 (EDT)

---

I am looking for an engraver who can engrave Japanese kanji on a small flat surface such as a pendant or keychain. The engraver does not necessarily need to be local. I have seen similar requests here, so I am hoping there is someone who can do it. Thanks.
Ann <acfromkc@yahoo.com>
denver, co USA - Monday, April 17, 2006 at 12:57:17 (EDT)

---

I need a hand engraver to do both sides of a ring (10-15 rings per month). Design is simply as seen in the link. I need lettering and spacing to be even and professional then the photos. This is the reason I am seeking a better engraver.
Andrew McIntyre <andrew@coinsoftime.com>
Riviera Beach, FL USA - Thursday, April 13, 2006 at 10:28:12 (EDT)

---

I would like an engraver or a professional stamper, that can stamp out my buckles as well as stamp my trade mark on the backs of my buckles. If there is someone interested in giving me a price for the stamping and the trademarking seperately, I would truely apprciate it. Thanks Contact info: sales@britzjewelz.com
Terri Lippens <sales@britzjewelz.com>
Prescott Valley, AZ. USA - Tuesday, April 11, 2006 at 20:45:36 (EDT)

---

Hi I am looking for an engrave. I Live in Maryland I am looking for an engraver in Northern VA, Washington, DC, Maryland area to engrave a bracelet. Please contact me when ever you get a chance.
Anissa Addison <aaddison@lycos.com>
Fort Washington, MD USA - Tuesday, April 11, 2006 at 12:36:51 (EDT)

---

I am looking for a master engraver who does fine deep engraving of family crests and mottos on signet rings, and who could do deep engraving of our family crest (a laurel branch on a twisted rope) and our family motto on a gold signet ring in April-May, 2006. I have a photo-enlarged detailed drawing of the crest, and my own ring, as guides. Thank you.
Tia Duer <tiaduer@gmail.com>
Washington, DC USA - Monday, April 10, 2006 at 12:03:43 (EDT)

---

Hi-I am looking to get 5 antique keys engraved with a first name on each. I had submitted a request earlier in the year but didn't get the keys until now...so sorry to anyone who had emailed me earlier. Would love to have the names in cursive if possible, I can send pics if needed. If you could give me a $ per key, location & timing, that would be great. Thanks. Tamarah
Tamarah Ghourdjian <tghourdjian@hotmail.com>
Brooklyn, NY USA - Sunday, April 09, 2006 at 20:42:52 (EDT)

---

I am looking for a hand engraver in North Carolina, preferably the Triangle area (Raleigh, Durham, Chapel Hill). A long time ago, 1988, when I lived in Denver, Colorado, I knew two wonderful hand engravers- Jack and Carol Farmer,-they worked out of the old jeweler's building in downtown Denver. Does anyone know where they are now?
Betsy <bconti@contigr.com>
Raleigh, north carolina USA - Friday, April 07, 2006 at 15:34:27 (EDT)

---

I need to have someone do a few dies for the old elongating penny machines. I understand the cost of hand engraving but need someone who can handle the jobs I have to do.
Len Schneider
Kaneohe, HI. USA - Thursday, April 06, 2006 at 16:38:23 (EDT)

---

I need to have someone do a few dies for the old elongating penny machines. I understand the cost of hand engraving but need someone who can handle the jobs I have to do.
Len Schneider
Kaneohe, HI. USA - Thursday, April 06, 2006 at 16:38:23 (EDT)

---

I am looking for the hand-engravers who has skills and experiences. If you are interested in working with us, please contact at my email address with some pics of your work. GTZ
taddy Mitsui <taddym3@aol.com>
tokyo, Japan - Monday, April 03, 2006 at 08:43:19 (EDT)

---

I NEED ENGRAVING TO BE DONE ON JEWELRY. I ONLY WANT WANT INITIALS, A NAME, AND MAYBE A BIRTHDATE. THIS IS FOR PERSONAL USE,NOT A BUSINESS. THANK YOU.
A Smith <abpsmith@aol.com>
LILBURN, GA 30047 - Sunday, April 02, 2006 at 23:05:05 (EDT)

---

Hello-I have a small project for a talented engraver. I have 25 golf putters that need deep engraving on the sole similar to a UPC bar code. I'd prefer not to remove shaft & grip, so be set up to do odd sized items & straight lines. no laser. best bid gets the job & 5 similiar projects for the rest of the year. thanks. FRED
FRED <reclinestien@yahoo.com>
Rio Vista, CA. USA - Sunday, April 02, 2006 at 03:54:45 (EDT)

---

Looking for a quality engraver for routine jewelry work. Small store, not a lot of engraving but want quality. Thanks Jeff Bong 607-936-3032
Jeff Bong <bongsjewelers@stny.rr.com>
Corning, NY USA - Monday, March 27, 2006 at 17:10:54 (EST)

---

I have three wedding gifts to be engraved. Two identical bud vases and one cake cutter. Engrave the wedding date and perhaps the bride's name or "Yosemite". The conical bud vases have no flat nor cylindrical surface. They are 8 inches tall. The cone tapers from one half inch diameter to one and one quarter inch diameter in five and one half inches. The base would also be a good place to engrave but is a compound curve, not a truncated cone. The cake knife has a plain handle with a one dimensional curve. Phone: 925-254-3953, Fax: 925-253-9782. I drive 880 to Fremont daily.
Richard Fauver <rfauver@comcast.net>
Walnut Creek, CA USA - Friday, March 24, 2006 at 13:32:49 (EST)

---

I have three wedding gifts to be engraved. Two identical bud vases and one cake cutter. Engrave the wedding date and perhaps the bride's name or "Yosemite".
Richard Fauver <rfauver@comcast.net>
Walnut Creek, CA USA - Friday, March 24, 2006 at 13:17:59 (EST)

---

I have a walking stick with a stainless steel knob as a handle. I would like to have a monogram engraved on the top of the knob. The knob unscrews from the rest of the walking stick, so it could be sent as a small unit.
Bill Palmer <bill@billpalmer.com>
Houston , TX USA - Monday, March 20, 2006 at 19:45:48 (EST)

---

I would like the name of someone in the Richmond or central Virginia area who can hand engrave a varriety of items.
Phyllis Galanti <nowhining@comcast.net>
Richmond, VA USA - Sunday, March 19, 2006 at 13:31:29 (EST)

---

i want a job as a hand engraver
joseph edward smith <shanegrove@hotmail.com>
bangalore, karnataka india - Sunday, March 19, 2006 at 08:11:23 (EST)

---

I would like to have the bolsters of my pocket knife engraved. Are there any engravers in this area that I could contact for estimates??
Jerry Byrne <jbyrne66@comcast.net>
Salt Lake City, UT USA - Wednesday, March 15, 2006 at 19:07:33 (EST)

---

I'm looking to engrave a heart shaped locket. Please send me an estimate per letter...
Daphne <daphnelillian@gmail.com>
Sunnyvale, CA USA - Wednesday, March 15, 2006 at 13:11:31 (EST)

---

I AM LOOKING FOR SOMEONE TO ENGRAVE THE INSIDE OF A TITANIUM RING FOR MY SISTER'S BDAY. COULD SOMEBODY PLEASE HELP. THANK YOU
Desiree Castro <caligirl@verizonmail.com>
Whittier, CA USA - Tuesday, March 14, 2006 at 20:08:07 (EST)

---

I have two identical gold rings I would like to have the initial V carved into them. I have the basic design of the V (it is a specific design created by my son's grandfather) but would like a few squiggles around it, nothing fancy. I don't need to give the rings as gifts until May of 2007. Am looking for estimates and turn around times. Thank you
Deana Osgood <deana.osgood@superradiatorcoils.com>
Chaska, MN USA - Tuesday, March 14, 2006 at 17:22:34 (EST)

---

I am looking for a hand engraver to engrave a sterling silver ring.
Leah <ohreally_us@yahoo.com>
Philadelphia, PA USA - Tuesday, March 14, 2006 at 11:20:09 (EST)

---

I am restoring a 1958 harley and I cannot locate an original air cleaner cover. What I need is the original engraving put back onto a cover that I have . It is a steel cover . After I have the engraving done ,I'll have to send it for re-chroming. Can anyone help ?
doc silinovich <docs@ulster.net>
saugerties, ny USA - Monday, March 13, 2006 at 14:44:45 (EST)

---

i need someone who can hand engrave a simple flourish type design on a round solid piece of brass about 23 millemters in diameter. this piece is the band on a refurbished antique sword cane. the design need not be complicated but is to be done just to dress up the band between the wooden staff and the handle. i would appreciate any suggestions about who might be able to do this. thanks for your interest.
jack oliver <jackoliver1148@sbcglobal.net>
kingsville, texas USA - Sunday, March 12, 2006 at 21:14:45 (EST)

---

Part time gunsmith needs some simple well-executed scroll engraving added to 2 rifle floorplates. They are a SAKO L61 and an issure milled steel 03 Springfield. I can do all prep; both are soft enough they will cut with conventional gravers. Customer is interested in Celtic or Classic Scroll theme, but has limited funds. Very small coverage & small amount of well done engraving is OK. Also would like to start working with a knowlegable engraver for Pennsylvania type rifle furniture. Must know the different "schools" associated with the different timeframes/locations of original makers. We also hand make in our shop perfect replica reproduction cases for high-grade revolvers, pistols, and long guns and repair original examples. Repair and restoration of "oak-and-leather" English cases a speciality. Our reproduction cases are made like the Victorian originals, with fully inletted solid brass butt hinges (with fire-blued steel screws) and back-inletted brass box locks; dust shelds, billard table wool cloth linings; American oak, maple; or Walnut material; English tapered partitions or French fitting or a combination of both. We have accessories for inside or can custom make same. VERY good prices to the Trade. Also will trade cases for engraving; have several projects needing engraving on hand. Custom leatherwork available for case covering or holsters and Safari type accessories made in "The Best London Manner". Give us an E-mail Photos available.
W.F. Wood-WOOD'S GUN REPAIR <goboom@bellsouth.net>
Oxford, AL USA - Saturday, March 04, 2006 at 16:32:02 (EST)

---

I am looking for someone to engrave the inside of a Tiffany & Company bracelet. This is a rush job; the bracelet is for my daughter's birthday next week.
Charlie Meade <cmeade@shorepointinsurance.com>
Irvine, CA USA - Monday, February 27, 2006 at 17:42:42 (EST)

---

I am planning to build a spinning rod for my father's seventyfifth birthday next year. Needless to say, I want this to be a very special rod. In the next few weeks I will be ordering a custom made nickel silver reel seat and I'm thinking about having it engraved like some of the fancier bamboo fly rods I have seen. This is the first time I have thought about doing something like this, so I'm looking for an engraver who can do the job and perhaps offer some aesthetic guidance. The target date will be in 2007 so I'm flexible regarding time.
John Adams <jngadams@msn.com>
Bethesda, MD USA - Wednesday, February 22, 2006 at 19:58:17 (EST)

---

I have a large stainless steel ring needing deep engraving (letters & numbers) to be given to my son as a H.S. graduation ring. If this is the wrong forum for this type service somebody please advise and/or make a recommendation. Thank you Ron
Ron Swearinger <ron.swearinger@dcss.ca.gov>
Rio Linda, CA USA - Wednesday, February 22, 2006 at 14:19:40 (EST)

---

i need someone to engrave grafitti on my ipod
pamela <o0opamxpamo0o@aol.com>
orlando, fl USA - Monday, February 20, 2006 at 17:13:14 (EST)

---

Would like to have the following pieces engraved: outer surface of a wedding band 1/8" wide, side and bottom of a baby porringer, and a baby rattle. Local jewelers don't have the machinery to engrave "round" pieces. Thanks so much.
liz <ebsapp@ec.rr.com>
Wilmington, NC USA - Sunday, February 19, 2006 at 19:04:10 (EST)

---

Need a small necklace or pendant engraved with Chinese characters. The words....."Always In My Heart"...i am willing to drive quite a ways if no one is local. I wil need this done before June.
Renee <RMZ76@aol.com>
Binghamton, NY USA - Tuesday, February 14, 2006 at 11:43:45 (EST)

---

Looking for an engraver to engrave a simple western style design on a Wilson 8802 style golf putterhead. I'd mail you the putter head. Email me for more info and to discuss.
Roger <rcorto@yahoo.com>
Steilacoom, WA USA - Monday, February 13, 2006 at 14:39:40 (EST)

---

I have a china cabinet that has curved glass corners about 26" tall that are engraved on the back side. The moving company broke one, and are replacing the curved glass. I need someone to be able to engrave and match the "cross hatchings" closely enough so that it doesn't look too off. I have pics available. Thanks
Robert Murphy <murphyrobert@att.net>
Folsom, CA USA - Sunday, February 12, 2006 at 12:23:28 (EST)

---

I would like to get the Air Graver for my work! I'am a gunmaker in Hungary and i would like to use it for my work, for Bulino engraving. Price? Condition? Thanks you T.I. Sallai
T.I. Sallai <info@africanhunt.hu>
Szekszárd, Hungary - Thursday, February 09, 2006 at 06:31:43 (EST)

---

My Fiance and I are to be wed In September, I Have been to several BS retail and outlet stores stating they cant do this and cant do that,which I regard as a futile attempt to make me puchase what is in the store. I am looking for some one to do a very personal ring for my wedding band and possibly for her's also. I can provide the blank band or if you know of a distributor for blanks for this kind of work we would be open to your suggestion if you want to kick one of your friends some of the buisness, we would be glad to support personal shops. The band is to be two tone White gold outer/ yellow gold inner band , most of the inticate work is to be done on the Y gold section of the band . incorporating an Infinity ring with scroll or vine work surrounding /possible inner wording. not nessesary. please repond and I will always listen to your expert advise on this. Getting Married only once!!! this has got to be it the item Im glad to share who did the work and where . Its your art! thank you for the support in advance and any effort put to response into this matter. S.P. 7142274066 c
Shannon P. <shannonprade@hotmail.com>
Anahiem, Ca USA - Sunday, February 05, 2006 at 23:59:01 (EST)

---

Need a hand engraver for a stainless steel cell phone to do some lettering and also a small mural
Alex Evans <Bigcoupe2003@yahoo.com>
Los Angeles, CA USA - Tuesday, January 31, 2006 at 21:31:42 (EST)

---

I would like the blades of two very unique letter openers engraved with at a name, title and the name of a university. I will supply the letter openers. If price is affordable, I would like them finished by March 10, 2006. Thank you!
Clydell Morgan <clydell@bellsouth.net>
Pearl, MS USA - Tuesday, January 31, 2006 at 20:58:54 (EST)

---

I'm looking someone who can engrave the back of my iPod with a crest, I'm very interested. Please contact me as soon as possible with a cost for this inquiry. Thanks, Sara
Sara <zotov100@chapman.edu>
Orange, CA USA - Tuesday, January 31, 2006 at 16:15:04 (EST)

---

Need three Japanese kanji engraved inside two wedding bands for a February 25th wedding. Engraver needs to be local to Central Florida.
Aaron Rowe <aaron.w.rowe@gmail.com>
Orlando, FL USA - Tuesday, January 31, 2006 at 12:13:11 (EST)

---

I am looking to get a few Kanji characters engraved in a metal bracelet, preferably before Valentine's Day. Please contact me immediately with price quotes (for 1-3 characters) if you think you can do this task. Thank you.
Anna <anna_natsume@hotmail.com>
Brooklyn, NY USA - Monday, January 30, 2006 at 17:55:48 (EST)

---

Need a small necklace or pendant engraved with Chinese characters.
john <paventy4137@aol.com>
syracuse, ny USA - Sunday, January 29, 2006 at 15:59:20 (EST)

---

WE ARE A CUSTOM SHOP IN THE MARYLAND AREA AND MAKE CUSTOM OIL CAPS FOR CUSTOM & HARLEY DAVIDSON MOTORCYCLES . WE ARE INTERESTED IN HAVING OUR LOGO EVGRAVED IN THEM THIS IS NOT A BIG JOB BUT IT IS IMPORTANT FOR US TO GET THE NAME OUT THEIR IF ANYONE IS INTERESTED PLEASE CONTACT ME.
LANA GARDNER <SUICIDECYCLES@HOTMAIL.COM>
MANCHESTER, MD USA - Tuesday, January 24, 2006 at 12:29:16 (EST)

---

I am looking for someone who can engrave a buck or deer tracks on the inside of a 6mm 10k white gold men's wedding band. It is for my fiance, and needs to be done by 2/10/06. Thanks!
Jamie Weigel <jweigel1@charter.net>
Wisconsin Rapids, WI USA - Saturday, January 21, 2006 at 15:21:21 (EST)

---

We are looking for a hand engraver who can duplicate artwork on to a rubber type material that can be vacuum formed and used in the making of formed signs.
Pamela Fawcett <pammiefawcett@yahoo.com>
Addison, TX USA - Thursday, January 19, 2006 at 15:39:08 (EST)

---

I am looking for a hand engraver who can cut custom pieces / logos out of a rubber/or conveyer belt type material, that can be vacuum formed.
pamela Fawcett <pammiefawcett@yahoo.com>
Addison, TX USA - Thursday, January 19, 2006 at 15:35:46 (EST)

---

Seek engraver to do custom work on nickel silver reel seats for fly fishing rods.
Frank Stockmal <F.STOCKMAL@comcast.net>
Homer Glen, IL USA - Wednesday, January 18, 2006 at 00:10:45 (EST)

---

Hi, our engraver has retired and we need an engraver for our handmade money clips. We have been in business for over 35 years. Please e-mail us at coinjewelry@volcano.net. We send the clips flat, and finish them up after they are engraved. Please respond ASAP. Thank you.
Tom and Patsy Cooper <coinjewelry@volcano.net>
Pine Grove, CA USA - Saturday, January 14, 2006 at 18:28:16 (EST)

---

looking for someone to engrave a nice wildlife scene on my super sport benelli, am open to suggestions, but the pattern that is on the legacy benelli is somewhat what i was thinking
fran mlnarik <fmlnarik@drtel.net>
forman, nd USA - Thursday, January 12, 2006 at 23:20:32 (EST)

---

I have a 10k white gold corazon ring, size 5 1/2, inlaid with a pink tourmaline. I am looking for someone that could inscribe the words "vous et nul autre" on the inside of the band. I have been searching for a while and no one nearby can do it because they don't know if it would work with the engraving machines. I need this finished by February 13 and I will not have the ring until January 31-February 3 or so. Please reply if you can help me out. I think a good hand engraver is my last place to turn.
Allen Smith <solid4life88@yahoo.com>
Gilroy, CA USA - Wednesday, January 11, 2006 at 19:26:26 (EST)

---

I am looking for some one to hand engrave a small project for me. It is custom artwork on a zippo lighter and a jewelry box. Thank you.
JP <juliep22@comcast.net>
West Chester, PA USA - Saturday, January 07, 2006 at 14:07:39 (EST)

---

I need to have an authentic military sword engraved. or one letter buffed out due to misplelling of the engraved last name. or have engraved rank and name buffed out and new rank and name engraved on other side of USMC NCO sword. Please advise and/or inform. Prefer work to be close to home so I don't have to mail. Thank You
kelly <laurelrn@sbcglobal.net>
Gladwin, MI USA - Friday, January 06, 2006 at 14:08:53 (EST)

---

Need to have two stainless steel flasks engraved . Would like some unique font styles and size. I can ship it to any location as long as there is a decent offer on pricing.
Scott <bigboyutah@aol.com>
Ogden, UT USA - Friday, January 06, 2006 at 09:12:34 (EST)

---

I'm looking to have 4 - 5 pocket watches (not sure of material, ie gold, silver etc.) engraved. Each one depicting something different. It's for my groomsmen, and the wedding is a good distance away, but I'd like to know what my options are. Please contact me on my email address.
Rob Smith <robsmi1223@gmail.com>
Charleston, SC USA - Monday, January 02, 2006 at 23:28:00 (EST)

---

I am looking for somone who can do scroll engraving on a gun and can also engrave several massonic symbols inside of the scrolling. And then gold and / or silver inlay the entire thing. This is not urgent but please call me at (228) 355-0363.
Pelham C, McNeese
Hurley, Ms USA - Monday, January 02, 2006 at 15:12:19 (EST)

---

I am looking for somone who can do scroll engraving on a gun and can also engrave several massonic symbols inside of the scrolling. And then gold and / or silver inlay the entire thing. This is not urgent but please call me at (228) 355-0363.
Pelham C, McNeese
Hurley, Ms USA - Monday, January 02, 2006 at 15:11:51 (EST)

---

I am looking for someone to engrave 5 antique keys (skelelton) with the names of my bridesmaids for my wedding. First names only. If this is something you are able to do, pls. contact me ASAP.
Tamarah Ghourdjian <tghourdjian@hotmail.com>
Brooklyn, NY USA - Monday, January 02, 2006 at 13:43:41 (EST)

---

I am looking for an engraver to engrave a monogram on my mother's silver wedding flatware set for a birthday gift to her this January. My mother has always wanted to have this done. There are 58 pieces. Please let me know if anyone is available to do this work, what the charge would be and the time needed to complete the job. Thank you.
Cindy Styron <styrons@gvtc.com>
San Antonio, TX USA - Sunday, January 01, 2006 at 14:12:09 (EST)

---

I have a Ralph Turnbull custom folding knife with plain bolsters and smooth ivory scales. I am looking for an engraver and scrimshander who could do a nativity scene on the knife.... maybe even on the blade as well as it is a small knife. I like the deep style bolster engraving, with the bank note details and gold inlay work. Any interest in this sort of project?
D NATHAN MEEHAN <nathan@fracjob.com>
Houston, TX USA - Friday, December 30, 2005 at 23:22:28 (EST)

---

I need someone to engrave on leather size of 11 x 14
menush <menoosh92630@yahoo.com>
Lake Forest, CA USA - Friday, December 30, 2005 at 16:29:05 (EST)

---

I need someone to engrave a cicular scipt monogram on two sterling silver cufflinks (which I can provide), 3 interlocking initials on each. Preferably ASAP, or before Valentine's day.
Erin Johnson <erin.p.johnson@gmail.com>
Rockville, MD USA - Friday, December 23, 2005 at 23:38:07 (EST)

---

i need a portrait engraved onto a couple of flasks. these are for my wedding in march. they don't need to be museum quality work, but i do need the picture to be recognizable. thanks in advance for any refferals or advice.
corey adolphus <zoolyfe@hotmail.com>
Culver City, ca USA - Friday, December 23, 2005 at 12:22:49 (EST)

---

i need two sterling silver rings with Terrell & Sanice 11/16/05 on the inside part of them. And a dog tag with T&;S 4LIFE on it before christmas eve.
Sanice Isaac <pumkin_bayb_313@yahoo.com>
Redford, MI USA - Monday, December 19, 2005 at 13:56:28 (EST)

---

I am looking for graver to engrave the intials on a knife in a scroll pattern.They will be very small in size on the badge of the knife handle.Dallas area would be great or at least Texas.THANKS
Marty Crabb <omahabows@hotmail.com>
omaha, tx USA - Thursday, December 15, 2005 at 20:55:05 (EST)

---

i need someone to engrave one word on the inside of a 14k ring. i live in miami, florida. please get back before christmas.
Yari <forever120304@yahoo.com>
miami, fl USA - Thursday, December 15, 2005 at 18:24:43 (EST)

---

I am looking for hand engraver in Dallas / Fort Worth area to engrave on small bronze figuries. Contact me at afshar@msn.com. Thanks.
F. Afshar <afshar@msn.com>
Richardson, TX USA - Thursday, December 15, 2005 at 11:02:24 (EST)

---

I want to get a pool cue engraved with someone's name for a christmas present. The engraving doesn't need to be done before christmas. I was wondering what the price range would be for this. Thanks!
Becky <pixidust200@aol.com>
Redlands, CA USA - Wednesday, December 14, 2005 at 06:43:13 (EST)

---

I have a wooden yacht that I need a name engraved on before christmas. Can anyone help me with this?
Fran <frann0126@yahoo.com>
Massapequa, ny USA - Tuesday, December 13, 2005 at 10:51:01 (EST)

---

Hand engraver needed to engrave initials into an oval steel grip cap on a rifle. The Grip cap will be a solid steel oval with two screws. I want The initials KWB creatively engraved to fill the area vertically between the two screws.
Kevin Bebout <kbebout@bellsouth.net>
USA - Monday, December 12, 2005 at 12:07:32 (EST)

---

Looking for a hand engraver, in the area, who has done previous work on the lip plate of a flute.
Kendra <msriley99@hotmail.com>
Laurel, MD USA - Sunday, December 11, 2005 at 22:26:41 (EST)

---

I need a Dunhill lighter engraved in time for Christmas. Thinking of a simple monogram or possibly more depending on the price. Please contact me immediately at cabenes11510@yahoo.com.
Christine Gonzalez <cabenes11510@yahoo.com>
Brookly, NY USA - Thursday, December 08, 2005 at 15:20:06 (EST)

---

I need a stainless steel flast engraved with a sipmle flip flop design. About 3x3
Ruta Sinusas <tallgirl6234@yahoo.com>
New York City, NY USA - Wednesday, December 07, 2005 at 15:32:16 (EST)

---

I am looking for a hand engraver that will do a small engraving job on a Smith & Wesson blue steel gun. Thanks !
Henry Buchanan <hbuchana@kcc.com>
Knoxville, TN USA - Tuesday, December 06, 2005 at 19:29:06 (EST)

---

Hi, I'm looking for someone to engrave a simple inscription (two lines of text - one will be very small) on the back of a Rolex. A straightforward job but I want the best. Mike
Mike <shepshedmike@hotmail.com>
Arlington, VA USA - Tuesday, December 06, 2005 at 18:57:46 (EST)

---

Need to engrave a pen with a name in Japanese
Juanita Venada <Tejanadelvalle@yahoo.com>
Austin, tx USA - Tuesday, December 06, 2005 at 17:20:24 (EST)

---

Northern Virginia Jewelry Store chain looking for Maryland or Virginia hand engraver to do sub-contract trade work. Must do excellent work and provide references. Please e-mail phone number to talk.
David <allianceb411@hotmail.com>
McLean, Va USA - Tuesday, December 06, 2005 at 16:32:47 (EST)

---

interested in finding engraver to do traditional scipt and block monograms on door knobs. pls email me with examples of your work and estimates on time and cost. I can email examples of what we would be looking for. thank you.
Carl Sorenson <csorenson@nanz.com>
New York, NY USA - Tuesday, December 06, 2005 at 15:00:24 (EST)

---

I would like two create two "love tokens" using Kennedy (silver) half dollars with custom engraving on one side. I have the coins. I want the words..."Finally" 12-15-1995...on two lines, over top of a nice brushed or designed background on the reverse side of the coins.
Bob Schellhamer <rcs14@ptd.net>
Ephrata, PA USA - Thursday, December 01, 2005 at 11:38:57 (EST)

---

Hi I was looking for an Engraver in the Pasadena/ LA area to engrave a chefs knife.
Braqd Herron <brodley03@yahoo.com>
Pasadena, CA USA - Friday, November 25, 2005 at 23:57:30 (EST)

---

HI, I was wondering if soemone could engrave a biblical verse on 100 glass or stone coasters? It is for a wedding. I am also wondering how much a service liek this would go for. In the Philadelphia, north or central jersey areas.Thank you
r w <beka806@msn.com>
phila, pa USA - Friday, November 25, 2005 at 19:46:20 (EST)

---

Looking for an engraver in the Kansas City area to hand engrave three words on top of a white gold ring. If you can do this please contact me at khalliburton@mail.franklincoks.org.
Ken Halliburton <khalliburton@mail.franklincoks.org>
Ottawa, KS USA - Wednesday, November 23, 2005 at 15:37:10 (EST)

---

I am trying to locate someone who will make a pair of custom scrimshaw cufflinks with a gentleman's custom picture on them. I don't know if this is something that is too difficult? They are for a very special person who is losing their father to cancer. Thank you very much, Jean Marie
Jean Marie Risney <wallace18350@yahoo.com>
Philadelphia, PA USA - Tuesday, November 22, 2005 at 18:50:56 (EST)

---

i am looking for an someone that can engrave chinese kanji on the back of a watch.
Jennifer <madamelee@hotmail.com>
los angeles, ca USA - Friday, November 18, 2005 at 03:32:55 (EST)

---

Hi, I'm looking for an engraver in the MD/DC/Northern VA area who would be able to engrave a few Chinese characters onto a 14k or 24k gold necklace charm. Thanks!
Alice <aspiegel@umd.edu>
Silver Spring, MD USA - Wednesday, November 16, 2005 at 21:59:31 (EST)

---

I am looking for someone in or near the Dallas area that can do some engraving on jewelry pieces.
Judy Darrow <judydarrow@hotmail.com>
Dallas, TX USA - Monday, November 14, 2005 at 21:08:24 (EST)

---

HI I am looking for someone to engrave the quote "Everyday is a chance to make life a little big better~ Liz Karnes " on a silver bangle bracelet that is round with no breaks in the bracelet. I believe that this would need to be hang engraved and was wondering how much this would cost. I can ship it to any location as long as there is a decent offer on pricing. THanks
Julie Tiedeman <julietiedeman@hotmail.com>
Brentwood, MO USA - Sunday, November 13, 2005 at 01:50:44 (EST)

---

I have a fairly simple, though odd, request for a Christmas gift. I've got a set of brass knuckles with flat sections on the top part of each finger-ring. I'd like to have a cross engraved on each of these flat sections. A machine engraver showed me how her clamps wouldn't hold the knuckles in place well enough for the machine to do its work. Plus I like the idea of supporting artisans, so I figured hand engraving was the way to go. I would prefer someone in either the Ann Arbor/Detroit area or the Kansas City area, but I'm fine with conducting the transaction by mail as well. I would cover all transportation, whether by car or by shipping costs, and I can prepay for the work by check or by PayPal. I know it's not particularly artistically challenging, but if you'd like this little job anyway, please drop me an email with your name, location, how much you'd charge for a job like this and how long you think it would take. Thanks in advance!
Emily Cahill <arthenadent@hotmail.com>
Ann Arbor, MI USA - Friday, November 11, 2005 at 23:04:35 (EST)

---

I am looking for an engraver with past experience in Buddhist Tonka design, who can engrave a traditional flame design on a large Wootz damascus bracelet. The engraving and inlay will be primarily gold.
Alan Howell Parrot <falco@savethefalcons.org>
Hancock, Maine (Me) USA - Friday, November 11, 2005 at 11:03:34 (EST)

---

Have recently had a copy of my police badge made in gold. Would like victorian style engraving in spots that are empty.
Louis Spagnola <spaggy275@aol.com>
USA - Wednesday, November 09, 2005 at 08:39:40 (EST)

---

I need to have both sides of the receiver of a Browning BAR engraved with scroll work and a big game animal on each side.
Dave Lucas <dll38sf@gci.net>
Chugiak, Ak USA - Friday, October 28, 2005 at 11:50:48 (EDT)

---

Hello, I am looking for someone who can engrave a name on a Zippo lighter using Cyrillic letters.
John Ellis <jealous77@hotmail.com>
Green Bay, WI USA - Thursday, October 27, 2005 at 19:53:16 (EDT)

---

Hi, I am looking for someone that can engrave two names on the top of a ring box that measures 1 sq. in. I also need milgraining engraved on all four sides of the box just below where the lid meets the base. Please let me know if this is possible, and approximate turnaround time and cost. I will not need this piece finished for at least another month. Thanks in advance for your assistance.
Andrea Yung <andreayung23@hotmail.com>
Cupertino, CA USA - Thursday, October 27, 2005 at 13:21:50 (EDT)

---

I am looking for an engraver in Manhattan--preferably the upper east side or the financial district--to engrave initials on four pewter napkin rings.
eholland <eholland@mla.org>
New York, NY USA - Monday, October 24, 2005 at 13:00:22 (EDT)

---

I need to have four pewter napkin rings engraved with an initial. I'm looking for an engraver in Manhattan, preferable the financial district or the upper east side.
E. Holland <eholland@mla.org>
new york, ny USA - Monday, October 24, 2005 at 12:50:10 (EDT)

---

I am seeking an engraver who can engrave Hebrew Letters on rings,necklaces, and bracelets. This would be on going work with recognition to you on my site Inspirations by Gia and The Real Angels Network. Even if you are not a resident of Kansas or the midwest this is OK.
Carmen Gia Beneton <CarmenGiaBeneton@aol.com>
Overland Park, KS USA - Friday, October 21, 2005 at 17:31:19 (EDT)

---

Looking for someone to hand-engrave a monogram and date on the back of a man's watch; preferably in an Eastlake or late Victorian style.
barbara <bwil@cox-internet.com>
tx USA - Thursday, October 20, 2005 at 15:46:55 (EDT)

---

I need the back of an antique watch to be hand engraved. Preferable by someone local. Please email if interested.
David <david@egrproperties.com>
Chicago, IL USA - Monday, October 17, 2005 at 15:11:13 (EDT)

---

Looking for an engraver that can engrave the Chinese symbol for WONG on four silver money clips. Thanks, David
David Wong <david__wong@yahoo.com>
Arlington, VA USA - Saturday, October 15, 2005 at 00:08:57 (EDT)

---

I am looking for an engraver in the East Bay of California that has experience in engraving instruments. I have a Sterling silver flute that i would like to get engraved with a leaf design. the flute has 18 keys, a lip plate and a crown that I would like to get engraved.
Victor Villarreal <Jvilla2631@aol.com>
Livermore, CA USA - Friday, October 14, 2005 at 20:12:51 (EDT)

---

Am looking for a hand engraver in northern virginia to engrave the back of a watch for a gift. I will need this completed NLT Nov.1st (2005).
Sobel <hsobel@noesis-inc.com>
Arlington, VA USA - Friday, October 14, 2005 at 14:19:00 (EDT)

---

I am looking to do some real over the top work on a frw tattoo machines as wicked as it can be done I am innew york but don't mind shipping I just would like some price quotes and design ideas
thomas murphy <meanstreettattoo@mac.com>
queens, ny USA - Tuesday, October 11, 2005 at 10:37:49 (EDT)

---

I am looking to have a family crest engraved onto a stainless steel flask and possibly a set of shot glasses. This is for a mid-November birthday present. Can anyone help?
Amy Karlsson <causeandorigin@yahoo.com>
Columbia, MD USA - Tuesday, October 11, 2005 at 08:33:48 (EDT)

---

Need hand engraver for small jobs on personal gun receivers. Preferrably local, I'm in Long Island N.Y. Mark.
Mark <cimage@optonline.net>
Massapequa, Ny USA - Friday, October 07, 2005 at 17:21:35 (EDT)

---

I need someone who can engrave ducks in a mans wedding band. I would need it done by January 10, 2006.
Jacalyn <Phenomenalford68@aol.com>
St. Charles , MO USA - Thursday, October 06, 2005 at 11:41:19 (EDT)

---

I'm looking for someone to engrave an image onto a man's wedding band. The image can be found at the following URL. https://www.knology.net/~silvanmoon/j-l%20gal%20basic.gif The wedding is at the end of December and I would love to surprise him with having this done by then.
Leane <leane725@knology.net>
Montgomery, AL USA - Thursday, September 29, 2005 at 00:49:55 (EDT)

---

I am looking for someone to engrave words and/or initials on the outside of sterling silver jewelry (rings, bracelets). This would be ongoing work. Engraver in New York City would be most convenient, but not absolutely necessary. Contact Katie at info@pi-jewelry.com.
Katie <info@pi-jewelry.com>
New York, NY USA - Tuesday, September 27, 2005 at 09:50:59 (EDT)

---

Looking for a hand engraver to engrave a celtic saying on the outside of 2 plane wedding bands, white gold. Would like it in a celtic type font if available. For a wedding, the sooner the better. Either you provide the wedding bands or we will. Email with pics of work and quote. Thanks Abbie
Abbie <abbiesrose@comcast.net>
Medford, NJ USA - Thursday, September 22, 2005 at 21:28:08 (EDT)

---

I want to have a sterling baby cup engraved in script first and middle name on 1 side, and date in #s on other side: Samantha Raquel 2-27-05. I would mail the cup to you, of course. Please send me your price, and sample of your script. Thank you very much. Ronni Bergman
Ronni Bergman <rgbergman@earthlink.net>
Pasadena, CA USA - Thursday, September 22, 2005 at 00:31:51 (EDT)

---

Hello Terri here, I am looking for an engraver for my jeweled buckles. I would like my Trade Mark (Britz Jewelz) Engraved on the back of them. They are either stainless steal or silver plated. I was wondering if there is anyone that would like to give me a price per buckle or gross amount. Thanks and you can reach me at sales@britzjewelz.com
Terri Lippens <sales@britzjewelz.com>
Prescott Valley, AZ USA - Sunday, September 18, 2005 at 23:02:56 (EDT)

---

We are gunmakers looking for good engravers and long term work. Because of the Karl Lippard designed shotgun for John Wilkes, London; for the first time the locks and components are interchangable. That means engravers can often engrave a number of sideplates for one customer to change the charactor of his gun. We are looking for American engravers to do standard work and to expand to Best Works for our client base. If you are a fine engraver, young or old, we have been around since 1830 and the requirement is the same. Our factory engravers have been Kenny Hunt, Harry Kell, etc..
John Wilkes Gunmakers Ltd <wilkes@fngbcorp.com>
colorado spgs, co USA - Sunday, September 18, 2005 at 17:49:15 (EDT)

---

I would like to have a pair of sterling champagne flutes engraved with the initials of the bride and groom on opposite sides of each flute; the wedding is 15 October. I am still looking to see if I can find an antique sterling covered wedding cup, but the flutes are definite.
Howard M Brown <hmb1000@flash.net>
Washington, DC USA - Saturday, September 17, 2005 at 09:59:30 (EDT)

---

I am looking for a hand engraver to engrave a custom celtic design on my nickel mounted bagpipes. there are 14 seperate mountings. I am hoping to start this project within the next year and have a budget of about 800 dollars. I am still working on the designs that I would like engraved.
Scot O'Kelly <o-ceallaigh@comcast.net>
San Rafael, CA USA - Friday, September 16, 2005 at 21:00:19 (EDT)

---

I am looking for someone who is experienced in titanium engraving. I have a titanium ring picked out that I would like to buy for a promise ring, and have "always and forever" on the inside of the band.
lauren <lauren.h.taylor@gmail.com>
Vancouver, WA USA - Wednesday, September 14, 2005 at 20:56:38 (EDT)

---

Looking for an engraver with gold inlay experience. I design jewelry in a classical style. I use stainless steel, gun metal, silver, platinum and 18k gold. My web site is www.rsimantov.com. Please email me if interested.
R Simantov
new york, ny USA - Wednesday, September 14, 2005 at 00:05:52 (EDT)

---

I need help. I'm getting a pool cue for my boyfriend for his birthday and I need someone who would be able to engrave on the bottom half of the stick a simple turtle drawing and a Greek saying that spirals down it. Is there anyone who can help. My boyfirend has had bad experiences with birthdays and I want to make this one the best. The turtle means alot to him, his greatgrandmother made him a turtle from a sharks tooth and she gave it to him for luck and with that, I want it on a pool cue to bring him luck. Help Me Please!!!
Heather <Vixen1021@aol.com>
Ewign, NJ USA - Monday, September 12, 2005 at 16:08:47 (EDT)

---

I need a 6mm 14K white gold wedding band engraved. I want it to say "I made a wish and you came true" on the outside but I I would like some design around it, possibly something with a tribal look to it (opinions from the engraver welcome)
Christine Sommerfield <cbs2870@hotmail.com>
Reno, NV USA - Sunday, September 11, 2005 at 18:42:30 (EDT)

---

I need 5 name plates engraved for 5 Benilli Super Black Eagles that will be given as Christmas presents. The plates will have to be less than and inch to fit on the stock. We would like a bear or deer or both to be on each plate as well as "Last hunt with Big Al" on each.
Elaine Huenink <ehuenink@yahoo.com>
Greensboro, GA USA - Friday, September 09, 2005 at 11:30:08 (EDT)

---

i am looking for someone who knows how to engrave a name on a pocket watch movement. i want to give it as a gift to my father for his birthday. also, looking for someone who can put a name on a pocket watch dial, but i dont think that work is engraving, i think it is just putting letters on to it. please contact me if you can do this, also prices for what it would cost.
jamie <jtjones@raex.com>
oh USA - Wednesday, September 07, 2005 at 22:03:17 (EDT)

---

We have platinum wedding bands, 3 mm and 5 mm, in which we would like to have five germanic runes engraved. The wedding is in mid-September, but we do not require that the engraving be done beforehand (merely that we are in possession of the rings, engraved or not, for the wedding!).
Rob Eickwort <reickwort@yahoo.com>
San Francisco, CA USA - Sunday, September 04, 2005 at 16:33:36 (EDT)

---

I would like to have a man's wedding band engraved in Chinese. Wedding is in 3 weeks.
Amy <amyatnorthland@yahoo.com>
Des Moines, IA USA - Tuesday, August 30, 2005 at 18:55:09 (EDT)

---

I am trying to get in touch with a hand engraver by the name of Tom McArdle. I believe he lives in South or North Carolina, I lost his number and address. Any help will be greatly appreciated.
Patrick <cmj007@bellsouth.net>
Brandon, Ms USA - Thursday, August 25, 2005 at 15:21:58 (EDT)

---

We are looking for some that can do a high quality portrait engraving, on metal, to enable us to print it on to leather.
Carville National Leather Corp <cnl2@citlink.net>
Johnstown, ny USA - Tuesday, August 23, 2005 at 09:15:05 (EDT)

---

I am looking for some one who does hand engraving for baby cups etc...in the Omaha area. Thank you..Diane
Diane Ames <amesdiane@hotmail.com>
Omaha, NE USA - Saturday, August 20, 2005 at 16:35:28 (EDT)

---

Looking for an emgraver to do initials and something ecorative an a silver ring. Please call 781-249-3410 or email to armsraised@comcast.net Thanks!
Michael <armsraised@comcast.net>
Wakefield, MA USA - Wednesday, August 17, 2005 at 23:35:43 (EDT)

---

I AM SEEKING AN EXPERT QUALIFIED ENGRAVER TO ENGRAVE A FAMILY COAT OF ARMS ON A GOLD RING THAT I HAVE. I WILL GIVE THE PHOTO OF THE CREST. I' M IN SAN DIEGO CA. PHONE NOS. (619) 267-3607 E-MAIL: fernandocorrea@cox.net
Fernando Correa <fernandocorrea@cox.net>
Bonita, Ca USA - Tuesday, August 09, 2005 at 19:45:59 (EDT)

---

Need highly skilled and detail oriented engraver for watches. Watch experience is not required, but, you should be able to make very small art type scenes in gold, silver and 316L.
Randy Gospich <Randy@portableone.com>
Discovery Bay, CA USA - Saturday, August 06, 2005 at 04:13:47 (EDT)

---

I need a stainless steel compass custom engraved, as soon as possible...Live in Santa Cruz, CA.
Carlos Seligo <moth@stanford.edu>
USA - Thursday, August 04, 2005 at 16:13:20 (EDT)

---

Hello, I am looking for someone to engrave a Mark 5 dive helmet on a pre-set Onyx gemstone and perhaps inlay the engraving with gold----in the style of class rings and such. Thank you.
Brandy <gaia504200@yahoo.com>
Avoca, Ia USA - Wednesday, August 03, 2005 at 14:54:58 (EDT)

---

Engrave a few words on back of a watch. "To Andrew on your 18th birthday. Love, Opa"
ROXANE CHANDLER <RWEISS@BROOKER-CPA.COM>
CASTRO VALLEY, CA USA - Tuesday, August 02, 2005 at 18:40:24 (EDT)

---

I wish to have three initials engraved onto a pewter mint julip cup
Diane Easley <deasley101@aol.com>
Little Rock, ar USA - Tuesday, August 02, 2005 at 18:29:11 (EDT)

---

I'm getting ready to leave the state for several years, and was looking for someone to engrave a simplified picture of my face (a profile, maybe?) on a necklace charm for my mother, if the price is affordable. She doesn't have many pictures of me. Thank you!
Jessica Miltenberger <Jessica52187@yahoo.com>
Austin, TX USA - Sunday, July 31, 2005 at 13:25:52 (EDT)

---

i need three egyption symbols engraved on a circle silver charm ASAP
Megan <smee_236@hotmail.com>
New Hartford, CT USA - Friday, July 29, 2005 at 16:37:37 (EDT)

---

I need three egyption symbols engraved on a silver circular charm - ASAP
Megan Sottile <smeegan236@hotmail.com>
NewHatford, CT USA - Friday, July 29, 2005 at 16:37:11 (EDT)

---

Looking for some one to engrave a lion picture on a metal flask about 6"x 3". This is a special gift for a wedding. Looking for anyone, i can pay for shipping. Please Help. Contact Luis at luismnavarro@sbcglobal.net..Thanks.
Luis <luismnavarro@sbcglobal.net>
Santa Ana, CA USA - Friday, July 29, 2005 at 01:30:30 (EDT)

---

I looking for someone to engrave a golf putter for a gift. Please e-mail if you are in the Dallas/Fort Worth area.
Bianca <bianca_foller@msn.com>
Dallas, TX USA - Wednesday, July 27, 2005 at 15:52:21 (EDT)

---

I would to find someone to engrave two sentences inside a sterling silver cuff bracelet.
Stacey Jakubowski <Staceyjaku@yahoo.com>
Boston, MA USA - Wednesday, July 27, 2005 at 14:07:24 (EDT)

---

We would like to make an old fashioned Russian Baptismal cross with ancient cyrillic script. The design is complete and can be emailed as .jpg or photoshop image. There are 32 characters and a cross in the field of the cross. On the back we would like the baby's initials vertically and the parents on either side horizontally. Thanks in advance for any help advice regarding the project.
Thor W. Nilsen <TIVTWN@aol.com>
Stirling, NJ USA - Friday, July 22, 2005 at 21:26:40 (EDT)

---

This is an update...with pictures. Thanks Nathan Meehan Fracmeister on bladeforums. https://www.turnbullknives.com/FOLD/PLAINRT.JPG (large pic!) https://www.turnbullknives.com/FOLD/PLAINRT-small.JPG .
D. Nathan Meehan <nathan@fracjob.com>
USA - Friday, July 22, 2005 at 11:46:26 (EDT)

---

I have a "plain Jane" Ralph Turbull folder with stainless bolsters and old (legal) elephant ivory handles. Am wanting bank note style engraving for the bolsters with gold and some sort of carving or scrim for the handles. Thanks
D. Nathan Meehan <nathan@fracjob.com>
Hosuton, TX USA - Wednesday, July 20, 2005 at 19:45:49 (EDT)

---

My fiance and I are looking for someone to hand engrave the inside of our wedding bands with two sanskrit words. One engraver we spoke to thought he would not be able to draw the long horizontal line at the top of the characters that unites the letters in each word. We are looking for someone preferably local, the NYC area. Thanks!
Amy <amylapolla@hotmail.com>
Brooklyn, NY USA - Monday, July 18, 2005 at 18:27:07 (EDT)

---

Need to locate a hand engraver to do engraving on jewelry items
Dennis Roggi <dmr51@earthlink.net>
E. Hartford, CT USA - Saturday, July 16, 2005 at 13:17:37 (EDT)

---

I'm looking for someone who can hand engrave 3 scripted initials into a small sterling silver ring box that has been plated with Rhodium. Thanks!
Jeff <jddawson@gmail.com>
Baltimore, MD USA - Wednesday, July 13, 2005 at 13:47:49 (EDT)

---

I need initials hand engraved on a silver napkin ring in a bold and decorative manner.
Betsy Currie <emcurrie@mac.com>
Palo Alto, CA USA - Tuesday, July 12, 2005 at 11:26:35 (EDT)

---

I'm looking for a hand engraver that can do wedding band patterns.
jeff <jeff@i-do.net>
USA - Thursday, July 07, 2005 at 12:49:50 (EDT)

---

I need the outside of wedding rings engraved with 2 words and a heart with a cross on the inside of it. If there is anyone who can do this please respond. Thanks.
J. Powell <littlerk@comcast.net>
Tuscaloosa, AL USA - Wednesday, July 06, 2005 at 21:52:50 (EDT)

---

We need two sterling silver baby I.D. bracelets engraved with just one name on each in script for a pair of twin baby girls. Southern CA area.
Lindsay Blackwood <lindsay_blackwood@yahoo.com>
Irvine, CA USA - Tuesday, July 05, 2005 at 19:31:21 (EDT)

---

Not really looking for engraving, rather someone who could draw the letter "V" embellished with banknote style, for use as a tattoo. Please write to discuss details or recomendations.
Jim Pobog <ta2me92704@yahoo.com>
Santa Ana, Ca USA - Sunday, July 03, 2005 at 21:47:09 (EDT)

---

I am looking for someone preferably in Utah or a surrounding state but not required, who would be interested in doing engraving work on aluminum, nickel silver, and fine hard woods etc. I would be interested in wilderness scenes and Celtic scrollwork etc. This could become a regular occurring contract also. Thanks
Neil <stsdh@hotmail.com>
Salt Lake City, UT USA - Wednesday, June 29, 2005 at 11:43:39 (EDT)

---

I want a short phrase engraved onto a curved section of a belt buckle. Any offers or recommendations on where to look would be appreciated.
William <Laxoman@hotmail.com>
Atlanta, GA USA - Monday, June 27, 2005 at 14:57:41 (EDT)

---

Looking for picture frames that can be engraved as a wedding gift
Lindsey Meagher <info@lindseys.ca>
Montreal, QC USA - Friday, June 24, 2005 at 12:06:30 (EDT)

---

I am looking for someone to freehand engrave a crown of thorns around three crosses. A friend of mine, now deceased, had this tattoo. I wanted to have a pendant done as a gift to his widow and daughter. Depending on the price of the work, I may require more than just these two. Please contact me quickly. The 1st anniversary of his death is October, 2005. I would like to have this done as a memorial to him. Thanks for any help you can offer.
Tracy <eaglewingstf@yahoo.com>
Anderson, SC USA - Monday, June 20, 2005 at 23:50:29 (EDT)

---

Looking for someone to perform engraving on watches/pocket watches for customers. Will have a preset design and/or engraving of initials, words, and/or names. Please contact to discuss: Terry - terry@iwearwatches.com
Terry Middleton <terry@iwearwatches.com>
Monument, CO USA - Thursday, June 16, 2005 at 15:35:07 (EDT)

---

I would like to have an old coin (eg. 1905 dime) made into an old fashioned "love token". I'm looking for a hand engraver to buff the back smooth, then engrave a small picture or some lettering. This will be a good-bye gift to my boss, who is retiring this December 2005. It is a small engraving job, but would mean a lot to me.
Karin Lynn <wondrinwhy@shaw.ca>
Edmonton, AB Canada - Wednesday, June 15, 2005 at 22:39:23 (EDT)

---

I need hand engraving on the case of my custom watch. Chicago area.
E.T.R <erob06@sbcglobal.net>
chicago, il USA - Wednesday, June 15, 2005 at 21:49:36 (EDT)

---

need work done on s&;w stainless revolver about 1/3 coverage price range of about $200.00 open for suggestions on style, possible 2 other guns to follow
Bob Cain <bc1222@earthlink.net>
marco island, florida USA - Friday, June 10, 2005 at 17:05:31 (EDT)

---

Looking for new engraver to do trade work. I currently have a gents flat top Stuller mounting that requires an initial "G" on top in a crest form.
Gary L. Mills <jabberwocky@pdq.net>
Houston, TX USA - Thursday, June 09, 2005 at 22:22:27 (EDT)

---

I am looking for an engraver that can do detailed family crest work on the surface of a custom made platinum ring. The ring has an almost flat rectangular surface that is approximately 11 mm high, 15 mm wide and 1.5 mm deep.
Josh Sperry <joshsperry@hotmail.com>
CA USA - Wednesday, June 08, 2005 at 22:10:09 (EDT)

---

I am looking to have my signet pinky ring hand engraved with my initials.
Anna Dornellas <annadornellas@charter.net>
Cayucos, CA USA - Tuesday, June 07, 2005 at 17:44:35 (EDT)

---

please can you forward my email address to ken.karlin. he is looking for a full time engraver.the ad was on your website on the april 28.2004 .thank you.
jeff taylor <jeff@ag-gems.co.uk>
england - Thursday, June 02, 2005 at 11:56:45 (EDT)

---

Need hand engraver in Virginia for single Old English on flatware.
Louis Mahoney <Lmahoney@timesdispatch.com>
Richmond, VA USA - Monday, May 30, 2005 at 15:51:54 (EDT)

---

I HAVE A COUPLE OF PROJECTS FROM A GUN TO PENS, (BANKNOTE STYLE) ENGRAVINGS
nick galanit <advertech@tco.com>
NY, NY USA - Wednesday, May 25, 2005 at 01:36:48 (EDT)

---

PLEASE I WOULD NEED SOMEONE TO ENGRAVE MY SONS PICTURE ON A GOLD PLATE AND IF GOOD FUTURE BUISNESSES FOR YOU I AM IN JEWLLERY BISNESS MYSELF WHOLESALING BIG COMPANY IN MONTREAL.THANK YOU.
JUDITH HERRERO <SABORAJUDY@HOTMAIL.COM>
MONTREAL, QUEBEC CANADA - Sunday, May 22, 2005 at 22:14:41 (EDT)

---

TO ENGRAVE MY SONS PICTURE ON A GOLD PLATE
judith herrero <saborajudy@HOTMAIL.COM>
MONTREAL, QUEBEC CANADA - Sunday, May 22, 2005 at 22:09:31 (EDT)

---

I need someone to engrave a one-year silver anniversary band for my boyfriend. The ring will be dropped off on Friday but I desperately need it for the following day (Saturday May 28th). If anyone can do sameday engraving on a ring it would be greatly appreciated, please let me know asap =)
Carolynne Broomhead <cbroomhead84@hotmail.com>
Rockville, MD USA - Sunday, May 22, 2005 at 15:40:42 (EDT)

---

My daughter is looking for someone that would engrave a dragon on a leather and silver braclet she has purchased for her boyfriend. The piece is long and narrow, aprox 1cm x 6cm. It is for his birhtday in July if possible. Thank you.
Katie Hallburg <just_themom@earthlink.net>
Centralia, WA USA - Friday, May 20, 2005 at 16:06:06 (EDT)

---

I am looking for an engraver to engrave a wedding ring as well as an anniversary ring with a short Latin phrase and a date. I was told by my local jeweler that due to the size of the band, I would need to have to hand engraved and they could not do it. I would like to find someone local if possible (Miwaukee, WI area).
Dennis Hahn <dennishahn@sbcglobal.net>
Menomonee Falls, WI USA - Thursday, May 19, 2005 at 09:52:02 (EDT)

---

I need a hand engraver to engrave a short phrase on the back of a iPod, the letter size will be small. I just do not know where to find a hand engraver in the San Antonio/Austin area. jayserna@satx.rr.com
Jay Serna <jayserna@satx.rr.com>
HELOTES, TX USA - Monday, May 16, 2005 at 16:27:49 (EDT)

---

I am looking to have three, small, brass school bells engraved for my July 16th wedding. They are going to be gifts for my neices and nephew, who are going to be bell ringers in the procession at the church. Does anyone have any recommendations? I am located in Rockville, Maryland.
Erica <TruBlue99@aol.com>
Rockville, MD USA - Saturday, May 14, 2005 at 21:41:35 (EDT)

---

I was wondering if anyone could do some ingraving on my flute, I already have a design in mind that I would like on there. It would be best if I could get someone rather close (central florida) to do it so I dont have to deal with sending it out. thanks Rebecca
Rebecca M <violinistperson@hotmail.com>
FL USA - Friday, May 13, 2005 at 12:56:12 (EDT)

---

Hello, Several years ago I gave my husband a signet ring with his initials engraved on it. The ring is a size 12 1/2 and is very heavy. The engraving was not very deep, and has since worn off. I am looking for someone to do a "very deep" ingraving on this ring. I belive it is referred to as "deep gouged out" engraving. Thanks!
Debbie <dldann@comcast.net>
Danville, CA USA - Tuesday, May 10, 2005 at 21:42:19 (EDT)

---

Have found engraver for A&;F emblem previously listed. -Dick
Richard Bud <budrichard@yahoo.com>
USA - Monday, May 09, 2005 at 10:58:08 (EDT)

---

We are looking for a hand engraver to do a three-letter interlocking monogram on the back of a 14k gold locket. We're on a budget and time is also a factor. Please contact us with a quote and some idea of turn around time today, if possible. Thanks in advance!
Laurie Morris <LaurieM7272@aol.com>
San Antonio, TX USA - Saturday, May 07, 2005 at 17:25:48 (EDT)

---

we are in the field of manufacturing of small weapons and ammunition. we can provide you a quality metal hand engraving services at a quite reasonable prices also we can provide you walnut buttstocks in unfinished, semifinished and finished quality, as per your sizes and drawings respectively.
Ishaq Hussain <suntag@msn.com>
Peshawar, NWFP Pakistan - Saturday, May 07, 2005 at 04:58:26 (EDT)

---

I have a 2&;3/4" brass circle from Galazan for mounting on a shotgun case. I would like the A&;F logo engraved on this circle. I will supply the circle and paper trade label on which the representation is actually A&FC;. On the perrifery would be in small script " Madison Ave. at 45th Street, New York". Two 1/8" holes for mounting would also have to be drilled. The case is being built to house an A&;F branded 2" British boxlock of the 1940 era. Please reply with cost estimation and delivery time. Case is in the building process. Thanks you
Richard Bud <budrichard@yahoo.com>
WI USA - Thursday, May 05, 2005 at 09:12:28 (EDT)

---

I HAVE 2 WEDDING BANDS THAT ARE 4MM. I NEED A EXP. ENGRAVER TO ENGRAVE (LANCE ) ON THE OUT SIDE OF THE GOLD BAND. THE OTHER I WANT (MARIA) ON THE OUTSIDE AS WELL. I AM WILLING TO PAY WHAT IS NEEDED TO HAVE THIS DONE. THANK YOU.
MARIA SULLIVAN <MARIA@TKSDS.NET>
HUDSON, FL USA - Sunday, May 01, 2005 at 19:38:34 (EDT)

---

I need to have my wedding rings engraved with inscriptions on the inside and out. Inside message- Aaron & Ashley May 28 2005 outside message- Love, Honor, Cherish Please help me out.. =)
Ashley <ALittleCMC@comcast.net>
Kennesaw, GA USA - Thursday, April 28, 2005 at 12:44:22 (EDT)

---

The addess for below is xupa@at@gmx.net
Xupa
USA - Sunday, April 24, 2005 at 17:34:41 (EDT)

---

I need a simple logo engraved on the face of a bold ring. The ring has an inch square blank signet area. I have the custom design. Lemme know.
Xupa
orlando, fl USA - Sunday, April 24, 2005 at 17:34:07 (EDT)

---

I am looking for a SKILLED hand engraver to engrave a Broken Antler Elk on 2 signet rings. The rings were hand casted and the artisit has since passed so the rings are not replaceable, there were origianlly 5 rings, 3 of which have been engraved by hand with the Elk, but not to our satisfaction. If you think of yourself as a highly mastered hand engraver please contact me. Regards, Gretchen Berg gretchenberg@yahoo.com
Gretchen Berg <gretchenberg@yahoo.com>
Fairfax, VA USA - Sunday, April 24, 2005 at 00:04:46 (EDT)

---

I have an antique silver watch that I need hand engraved with three names (my son's, his grandfather, and his great grandfather). It was just left to him and we want to make it very special for many years to come.
Bo Carpenter <sanzia2004@yahoo.com>
Stafford, VA USA - Saturday, April 23, 2005 at 21:21:45 (EDT)

---

ATTENTION B. AASLAND! I received your email of your beautiful work, but the email got deleted by accident so I lost your email address and could not respond. I would love for you to engrave my flute! Please contact me again or call me at 870-247-1726. Thanks!
K. Hanley <daysiemay@cablelynx.com>
Little Rock, AR USA - Friday, April 22, 2005 at 17:52:14 (EDT)

---

ATTENTION B. AAS
K. Hanley <daysiemay@cablelynx.com>
Little Rock, AR USA - Friday, April 22, 2005 at 17:50:40 (EDT)

---

Looking for someone to hand engrave a lip plate on a flute.
K. Hanley <daysiemay@cablelynx.com>
Little Rock, AR USA - Friday, April 22, 2005 at 01:31:14 (EDT)

---

I need an engraver to engrave shadowed block letters (initials) vintage style on several sterling belt buckles - different initials and different sizesThank you. Howard
Howard Edelstein <hbe@edelsteinfinancial.com>
Cleveland , Oh USA - Thursday, April 21, 2005 at 22:21:52 (EDT)

---

I am looking for someone to engrave a putter head that is to be overlayed with sterling silver. These would be limited editions and is in the planning stage right now. I am looking to see examples of engravers' work.
Bruce Dobie <buckleworld@aol.com>
West Palm Beach, FL USA - Thursday, April 21, 2005 at 13:40:21 (EDT)

---

Hi, I'm looking for an engraver to engrave a large quote on a silver cuff braclet.
Tins <riverbreeze@earthlink.net>
stevensville, md USA - Tuesday, April 19, 2005 at 00:24:23 (EDT)

---

I need engraving done on the outside of a titanium ring, 4mm wide
Deb <japad@yahoo.com>
Napa, Ca USA - Thursday, April 14, 2005 at 12:35:49 (EDT)

---

Hi, I am looking for someone to engrave an elaborate design on a small silver toothpick holder. I would like some type of antique looking design. If I can provide the design I would like to but if I can only select a design of some provided I would be interested as well. If anyone would like to write me with a reply I would appreciate it. Thank You. --Suzi
Suzi Mahayni <suziplease@yahoo.com>
Mission Viejo, CA USA - Wednesday, April 06, 2005 at 22:28:06 (EDT)

---

I need someone in the Vancouver area who can engrave Japaneese characters on silver jewellery
brian <bhtobb@hotmail.com>
Surrey, BC Canada - Wednesday, April 06, 2005 at 07:05:12 (EDT)

---

I have a ring that needs about 13 characters engraved on the flat outer side of the band. Please email me with a price if you think you can help. Thank you.
Daniel Millbank <dmillbank@hotmail.com>
Chattanooga, TN USA - Wednesday, March 30, 2005 at 08:54:04 (EST)

---

I need someone to engrave a simple drawing of a standing stork on an ice bucket. Please contact me if you can help. Thank you. doug
Doug Weinstein <douglas.weinstein@gmail.com>
Atlanta, GA USA - Monday, March 28, 2005 at 11:14:56 (EST)

---

I am looking for someone who can engrave on a wedding band a personalized picture I have of an irish cross. I want it in detail and ornate. I also want it like a deep relief carving, inset into the ring. Other places I have contacted say they can't carve/gouge away metal and make it ornate and detailed on something as small as a wedding band. If anyone can do that please contact me and if it's possible send me a sample of some of your work along these lines. Thank you, Carolyn Southworth
Carolyn Southworth <nhchick17@juno.com>
Peosta, Iowa USA - Thursday, March 24, 2005 at 00:03:08 (EST)

---

I am interested in finding a hand engraver that can engrave our annual golf tournament trophy. Our trophy is a large tin beer stein with lid measurring approx. 12" in diamater. It looks a bit like the Stanley Cup with a lid and a handle. We would also need to engrave one of the edges of the lid with the names of the four original members. The trophy would need to be updated every year as there will be a new winner. If anyone is interested please contact me at 301-758-6853 or e-mail FXShannon@leggmason.com
Xavier Shannon <FXShannon@leggmason.com>
Annapolis, MD USA - Monday, March 21, 2005 at 18:11:45 (EST)

---

I need to have a monogram engraved on a signet ring.
M P Duggan <maryp@pngusa.net>
Ridge, MD USA - Wednesday, March 16, 2005 at 20:02:43 (EST)

---

I have had a great response from many great hand engravers on this forum in the past ~ as stated below - we are an American Custom Watch Company, I am interested in finding an engraver that is able to work on Hard surface - ( STAINLESS STEEL ) .....This is not a position that we want filled at our compnay but looking for an individual that we would be able to start a business relationship with. Please email me - or call me at 717 - 653 - 9799
Richard <artwork@rgmdesigns.com>
Mount Joy, PA USA - Thursday, March 10, 2005 at 11:12:18 (EST)

---

I am looking for a hand engraver to engrave on a wristband of a watch
Jessica Raiz <jbruno_raiz@hotmail.com>
Wayne, NJ USA - Wednesday, March 09, 2005 at 12:01:34 (EST)

---

i need someone to engrave a blue marlin on a wedding band for my fiance. something very simple. thanks!! stephanie
stephanie <stephbhodges@hotmail.com>
ssi, ga USA - Saturday, February 26, 2005 at 14:44:32 (EST)

---

WANTED: Someone who can hand engrave silver bowl. It is a traveling trophy. THANKYOU
Kate Smith <kmaesmith@hotmail.com>
USA - Monday, February 21, 2005 at 19:01:12 (EST)

---

I am looking for an engraver to engrave a bloodstone that is on a ring.
K. Parkes <studio@krparkes.com>
Vancouver, BC Canada - Friday, February 18, 2005 at 14:51:14 (EST)

---

We have 10 off chandelier bowls to engrave on free issue brass for St.pauls Cathedral and need a hand engraver to carry out the work. Samples exist but need fine tuning, the letters are approx 20mm high, in a roman style.
Rod Smith <rod@hallmarksigns.co.uk>
Croydon, U.K. - Wednesday, February 16, 2005 at 08:25:22 (EST)

---

I have a Bulgarian Luger that was refinished and the Manufacturers symbol was obliterated (DWM). I would like to have the symbol returned to the top of the receiver.
John M. Dodson <johnd1@comcast.net>
Abingdon, MD USA - Tuesday, February 15, 2005 at 14:41:23 (EST)

---

I need a small symbol engraved on a new silver ring right away, please email me for details. If price is right I may want more work done.
Mike <mike032@sbcglobal.net>
Oakland, CA USA - Saturday, February 12, 2005 at 01:08:36 (EST)

---

I need the back of a curved ID braclet engraved with the information for a Medic-Alert contact. It would include the membership number along with the 1-800 phone number and the fact that I have a heart implant and take anti-coagulants. The bracelet is curved to fit the shape of a wrist so cannot be mounted where the surface being engraved is flat. The bracelet has the symbol for Medic-Alert soldered to the front already.
Christopher Tuck <tuckspub@yahoo.com>
Dallas , Tx USA - Monday, February 07, 2005 at 10:39:25 (EST)

---

i would like my name engraved on some of musical instruments...fancy script as well as some flower patterns on said instruments brad
brad batz <bbjamz@hotmail.com>
rochester, ny USA - Thursday, February 03, 2005 at 15:28:55 (EST)

---

I need to get a family crest on a penant from a ring.
Chris <chris@sperryproperties.com>
Denver, CO USA - Tuesday, February 01, 2005 at 12:03:57 (EST)

---

Need someone to engrave and or recut metal on shotguns near Long Island N.Y area. Contact Mark, cimage@optonline.net
Mark Marino <cimage@optonline.net>
Massapequa, N.Y USA - Monday, January 31, 2005 at 13:51:44 (EST)

---

I am looking for a skilled engraver to engrave a sword with Kanji (chinese characters) as well as initials. Thank you.
jamie <jem919@aol.com>
wash, dc USA - Saturday, January 29, 2005 at 12:53:03 (EST)

---

I need someone who will engrave an old sword with a sentance or so. It is sort of like a William Wallace sword. I am going to need it done a day before valentines day. Thanks very much.
Kate <bbllduke@yahoo.com>
Denver, CO USA - Saturday, January 29, 2005 at 11:45:12 (EST)

---

I'm looking for someone to engrave on my fiance's wedding band which is a size 7 four mm white gold band the following: Michael & Michelle (the sign of infinity - which is a sideways eight) April 2nd, 2004
Michelle <mmich101@yahoo.com>
Austin, TX USA - Thursday, January 27, 2005 at 16:10:48 (EST)

---

I am looking for someone who can engrave a dragon onto a wedding band. If interested please contact me @ draxgrl@yahoo.com
Shannon <draxgrl@yahoo.com>
USA - Monday, January 24, 2005 at 01:42:37 (EST)

---

I am looking for someone to engrave a single Old English letter on Grand Colonial sterling flatware by Wallace.
Louis M. Hopkins <LouisMHopkins@yahoo.com>
USA - Saturday, January 15, 2005 at 10:09:43 (EST)

---

Hello, I am looking to have some banknote engraving done on a lightsaber I am machining. I may have between one and thirty sabers needing engraving, keeping a potential engraver busy and well funded for some time. Please contact me promptly. Thank you. -Zion Enos
Zion Enos <ilenos@pepperdine.edu>
Malibu, CA USA - Friday, January 14, 2005 at 12:47:08 (EST)

---

I need "Chrystine Fox" engraved on my flute.
Chrystine Fox <Ladyceltic343@aol.com>
Conyers, GA USA - Wednesday, January 12, 2005 at 19:47:14 (EST)

---

I need a skilled engraver to engrave a picture on the outside of a flat [preferably sterling silver] ring. The ring width and the ring itself are still in discussion, but the picture I want includes a dragon and a unicorn and there will be some inscription on the inside of the ring as well. I have a drawn picture available to view to anyone who are interested in this project...just contact me and we can disuss it. Thank you.
StephOnnie Jasinski <Onnie1313@hotmail.com>
Austin, TX USA - Tuesday, January 11, 2005 at 17:34:06 (EST)

---

I need a hand engraver to engrave a three letter monogram on the back of a "Return to Tiffany" tag bracelet charm. Thank you.
David Johnson <johnsonhouse@alltel.net>
Jefferson, GA USA - Monday, January 10, 2005 at 23:10:27 (EST)

---

I am looking to have a battle ready sword engraved. On top of blade both sides with latin words. Also emblem on case tip. If anyone could do this please contact me. This is a gift.
Donna <Roses4Mary@msn.com>
Ledyard, ct USA - Wednesday, January 05, 2005 at 21:53:18 (EST)

---

Looking for a skilled hand engraver to show me the ropes. I am looking to learn engraving to enhance my part time job of producing powder horns.
Chris Gaines <chrisgaines@shepherdsguide.com>
Baltimore, Md USA - Tuesday, January 04, 2005 at 16:12:30 (EST)

---

This is a simple job i need 4 letters "IFFS" engraved on a size 6 ring. Please email me if interested.
Christopher Miller <ChristopherMiller814@hotmail.com>
Jonestown, Pa USA - Thursday, December 16, 2004 at 22:06:07 (EST)

---

Looking for a Handengraver in Houston. Various fine jewelry jobs.
Jeff Dunnington <jeff@3dwaxmill.com>
Houston, Tx USA - Sunday, December 12, 2004 at 16:22:27 (EST)

---

IM LOOKING TO HAVE 20 TATTOO MACHINE FRAMES ENGRAVED WITH THE WORD OLDTIMER AND A BIT OF DESIGN TO GO WITH THE SHAPE, IM ON LONG ISLAND , ANYONE INTERESTED.
CLIFF WHITE <CLIFFSTATTOO@YAHOO.COM>
SELDEN, NY USA - Saturday, December 11, 2004 at 13:15:59 (EST)

---

I need to engrave on the underside of a pair of cufflinks and can't find anyone to do it. Any suggestions in Ithaca, NY? THANKS!
BR Medrano <kbilly_ss_70s@hotmail.com>
Ithaca, NY USA - Friday, December 10, 2004 at 19:48:11 (EST)

---

I have a silver cup that needs a name and date engraved on it.I live in Big Bear lake CA.If your are within a couple hours that would be great.
T.C.mayson <maysonite@hotmail.com>
big bear lake, CA USA - Friday, December 10, 2004 at 14:42:49 (EST)

---

I am looking for a local hand engraver who can engrave japanese symbols inside wedding bands. The art of hand engraving is lost and everyone only seems to have a computer that can do numbers and letters, not even the and symbol. Please contact me if you are in the Miami area and can help my fiance and I, we are on a pretty tight budget. Thanks.
S. Phelan <Phelans@sunseths.dade.k12.fl.us>
Miami, FL USA - Thursday, December 09, 2004 at 14:26:38 (EST)

---

Have pocket watch and replica Model 95 Winchester ( the initial Browning version) that I would like moderate engraving. For rifle have in mind a scroll with last name in it with some other(need help here on what looks good on Model 95). Pocket watch is German Silver from 19th century. Would like a pattern and name engraved on/in hinged cover.
Mike Arehart <marehart@hotmail.com>
Boise, ID USA - Saturday, December 04, 2004 at 02:20:54 (EST)

---

Looking for a skilled hand engraver who could engrave some Telugu characters on the inside of a ring.
Francis <francis02906@yahoo.com>
San Francisco, CA USA - Tuesday, November 30, 2004 at 03:12:52 (EST)

---

My wife inherited an old but beautiful set of sterling silver flatware, with each piece engraven with a very ornate "H" on the handle. As our last name starts with an "A", we are looking with a very experieced engraver change the letter with a tented or horizontal line on the top of the "H" in a similar style so that it will read "A". This is probably a simple task, but we have many pieces and thus uniformity will be an issue. The set is over 50 years old, and I was told by an jeweler that hand engravers are few and far between who still do this type of lettering. Experienced engravers only please. Thank you.
Steve Alder <snkinmesa@aol.com>
Mesa, AZ USA - Monday, November 29, 2004 at 14:53:42 (EST)

---

Pewter Christmas Ornament... I am looking for someone to hand engrave a seven letter name and the year "2004" on a pewter Christmas ornament. I would send it to you along with a pre-paid envelope to return it to me. It is not necessary to have it done by Christmas. (To see the ornament, go to: https://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd;=1&item;=2287552916&ssPageName;=STRK:MEWN:IT). Thank you for your interest.
Veronica <vsmithcasem@yahoo.com>
Renton, WA USA - Sunday, November 28, 2004 at 21:34:27 (EST)

---

Alter a 23 year recess from Scrimshaw I have jumped back into it. I am looking for some sample plates Engravers pratice on. I love the style and it may fit well into my work. I want to incorporate them into my scrim's. Many years ago a friend and somewhat famaous engraver George Sherwood offered me a few of his pratice plates. I wish now I would have accepted. Thanks... BILL Black PS...I can trade for fishing flies....as I own Spirit River Inc.
Bill Black <wmblack@glidecable.com>
Roseburg, Or USA - Sunday, November 28, 2004 at 01:15:04 (EST)

---

I am seeking an engraver who can engrave our businesses pots. We have 2 types, aluminum and stainless steel. They are used for cooking so the ability withstand high temperature is important. I am told both the cure of the pot and the material make engraving very difficult. I have one local company working on how the engraving can be accomplished and am seeking bids from others. Another option is to create a "banner" piece of material that is engraved and attached to the pot. This will be ongoing project as pots are sold, donated and given as gifts. I can provide pictures of the pot and a sample pot to test with.
Liz Beddow <TO_Melting_Pot@hotmail.com>
Thousand Oaks, CA USA - Thursday, November 25, 2004 at 12:50:46 (EST)

---

I am looking for an engraver to engrave a signet ring with a monogram. The engraving should be reversed and deep enough so the signet ring could be used as a seal.
Bryce Chan <btc1@columbia.edu>
Plano, TX USA - Wednesday, November 17, 2004 at 14:50:27 (EST)

---

I am looking for someone to engrave a Marlin lever action rifle(1894ss). The receiver is stainless steel. Closest to NJ as possible. Thank You.
Jimmy Masucci <Zio1023@aol.com>
livingston, nj USA - Saturday, November 13, 2004 at 22:00:33 (EST)

---

I have three leatherman squirts that i want engraved for my groomsmen. Any suggestions on where i could get that done? I've tried things remembered and they are a bit expensive. All I need engraved on the tools is 3 letters and a date.
Sandra Shin <sandradshin@yahoo.com>
dallas, tx USA - Saturday, November 13, 2004 at 12:07:10 (EST)

---

I am looking for someone to engrave a picture frame (a 5x7 size) for me, but in Japanese, the name 'Andre'. I am wondering how much it will be and if I can get it by December 1st. Thank you for your response
Courtney Brooks <tyresecb@hotmail.com>
South Bend, IN USA - Friday, November 12, 2004 at 10:21:55 (EST)

---

I am working on an Ithaca double barrle shotgun nitro. It is an old gun and the metal engraving is worn off and also needs cleaned of rust and debris and the barrle needs re-blued if there is anyone out there who can help me make this gun look new again please reply.
Nick Gray <muddober96@yahoo.com>
Alexandria, Oh USA - Wednesday, November 10, 2004 at 19:44:49 (EST)

---

I am working on an Ithaca double barrle shotgun nitro. It is an old gun and the metal engraving is worn off and also needs cleaned of rust and debris and the barrle needs re-blued if there is anyone out there who can help me make this gun look new again please reply.
Nick Gray <muddober96@yahoo.com>
Alexandria, Oh USA - Wednesday, November 10, 2004 at 19:44:47 (EST)

---

Two of my friends recently get a new born baby. I want to present Stering Silver Feeding Spoon to their family with graving their baby name. Can you handle to engrave the name of "YUUKI" on the spoon,and the name of "NAO" on the other spoon. If you can handle it, I am appreciated it very much. Please let me know.
Takao Saito <sakurausa@msn.com>
Brooklyn, New York USA - Tuesday, November 09, 2004 at 12:35:59 (EST)

---

I have 12 display samurai Katana swords and would like to get a different Japanese Kanji symbol engraved on each. Katanas are made of 420 surgical steel.I have the Kanji I'd like engraved. I am looking for price estimate and length of time required to complete this project
Clyde Haynes <haynesjr_online@yahoo.com>
New York, NY USA - Friday, October 22, 2004 at 18:00:19 (EDT)

---

Bausch & Loumb stero zoom 7 microscope Steve, I have a stero zoom scope on an xy stand with lots of accecessories for $1000, should you know anyone who would have an interest. Thanks John Bowles 336-998-8679
John Bowles <jfb@yadtel.net>
Advance, N C USA - Tuesday, October 19, 2004 at 14:37:28 (EDT)

---

Do you do picture engravings in jewelery. I am looking to place a picture into a charm on a necklace.??
Carmella Massie <cmelon44@hotmail.com>
syracuse , ny USA - Tuesday, October 19, 2004 at 09:51:47 (EDT)

---

I needed a caduceus staff made by 10/25; I can email pics of the exact design for a quote, I only want it about 2 or 2.5 feet long in your standard alloy. I prefer email: Reginald.Hill@Nextel.com
Reggie <reginald.hill@nextel.com>
Denver, CO USA - Thursday, October 14, 2004 at 18:00:14 (EDT)

---

I am stationed in Germany and one of my very good friends is ETSing in about a week. I have designed a bracelet for him but can't find an engraver in my area. The bracelet should be finished by the 19th. For the engraving, I want two howling wolf heads facing the letters "T" and "M". My friend is very big into his Native American heritage and his spirit guide is the wolf. His other love is his two daughters. I want to combine his two loves on one bracelet. Can anyone help me? Please contact me asap. I realize I won't get the bracelet to him b/4 he leaves Germany, but I'd like to get it to him b/4 the end of November. Hopefully waiting, 1LT Smith
Mel Smith <jstlivelife82@yahoo.com>
Sommerach, Germany - Thursday, October 14, 2004 at 06:45:01 (EDT)

---

have man,s gold i.d. bracelet and want my initial plus some art work done in gun quality fashion. id plaque is about 1/2" wide by 2 1/8" long. 14k. contact me by e-mail or cell 561-801-0141, in florida, brien.
brien bell <beejek@yahoo.com>
lantana, FL USA - Wednesday, October 13, 2004 at 17:32:14 (EDT)

---

The premium Pinot Noir wine makers of the Willamitt Valley have organized to produce a special blend for release (600 cases) this year as a fundraiser to support my son. He is a winemaker who has contracted ALS. I have purchased a small 3 1/2", vintage sterling trophy which I would like to have engraved to present to this group as a special thank you. Please note, I an Not asking for a donation or discount. I just want engraving which is of higher quality than is available in the local trophy shop. Any interest?.
James Bagnall <jbagnall@calpoly.edu>
San Luis Obispo, CA USA - Tuesday, October 05, 2004 at 16:55:21 (EDT)

---

Fragrance company seeking engravers for in-store promotions starting Valentines Day (week) 2005. Glass bottle with metal plate on top of bottle to be engraved with customers first name or initials. Looking for people in New York area - Miami area - Dallas Area, Washington DC area, Los Angeles Area.
marcella berlin <mberlin@puigna.com>
New York, NY USA - Tuesday, October 05, 2004 at 09:16:41 (EDT)

---

I am looking for someone to engrave two names onto the outside of a plain 4.5 mm 14k gold band. Thank you.
Mandy <mandy_dendy@hotmail.com>
Bismarck, ND USA - Monday, October 04, 2004 at 11:44:17 (EDT)

---

I need the back casing of a stainless steel rolex watch engraved. the engraving must be done on the circular portion of the case.
clayton seifer <claytonseifer@yahoo.com>
kenosha, wi USA - Friday, October 01, 2004 at 00:01:02 (EDT)

---

I'm looking for an engraver to do several projects over the next few years. The Projects will vary in size and detail. You can contact me at 989-871-5423 leave a message.
Robert Bunnell <bbunnell@kaumagraph.com>
MI USA - Friday, September 17, 2004 at 08:05:26 (EDT)

---

Need to engrave initials and a date on 4 silver gravy ladles. Needs to be in NY area because of time constraints. 917-922-2113 - thanks
David Rosenthal <drosen9@aol.com>
Forest Hills, NY USA - Saturday, September 04, 2004 at 19:06:18 (EDT)

---

Small job - I need a small brass plate about 1" x 3", with holes for screws, engraved with a 3 line/67 character message for a reasonable price. Please send me a quote if interested.
Tina <celluloid_dream@hotmail.com>
Milwaukee, WI USA - Saturday, September 04, 2004 at 09:12:27 (EDT)

---

I am a master gold and silversmith involved in the craft for over 35 years. I specialize in custom, hand-made gold and silver western buckles (ranger sets and trophy style, etc.). I am looking for a hand engraver who lives in the Los Angeles vicinity and can work together with me in my workshop full-time. Willing to pay top dollar per piece. Must specialize in engraving overlay technique in 3-D. Position available immediately. Please call me at 323-913-5813 for appointment.
Ahmad Khan <meyersdenn@ev1.net>
Los Angeles, CA USA - Friday, September 03, 2004 at 16:33:53 (EDT)

---

My husband and i want to get our wedding bands engraved with our vows on them. they would also have to be sized down. they are family heirloom, must be treated with care, but we don't have a lot of money!
elizabeth smith <koollizzy222@yahoo.com>
Fresno, Ca USA - Monday, August 30, 2004 at 22:33:47 (EDT)

---

Needing an Engraver for a customized 1/64th scale HotWheels project. The project would involve placing the HotWheels logo on top of a car (1.25" x .75") along with some scroll work for accent. Please contact me if you are interested.
Darren Jenkins <mrawacs@hotmail.com>
Oklahoma City, OK USA - Friday, August 27, 2004 at 10:41:28 (EDT)

---

I am a small custom jeweler looking for a hand engraver for my work. Looking for someone who I could build a long term relationship. Please email me contacts and approx. turn around times.
Susan Maxey <poneygirl22@aol.com>
conyers, Ga USA - Wednesday, August 11, 2004 at 10:10:41 (EDT)

---

I need an engraver who can create custom designs on the bell of a french horn and operates in or near michigan. VERY IMPORTANT!
Camran Wilson <Chubbis2@aol.com>
Chelsea, MI USA - Sunday, August 08, 2004 at 15:22:52 (EDT)

---

I need an engraver who can create custom designs on the bell of a french horn and operates in or near michigan. VERY IMPORTANT!
Camran Wilson <Chubbis2@aol.com>
Chelsea, MI USA - Sunday, August 08, 2004 at 15:22:47 (EDT)

---

I need an engraver who can create custom designs on the bell of a french horn and operates in or near michigan. VERY IMPORTANT!
Camran Wilson <Chubbis2@aol.com>
Chelsea, MI USA - Sunday, August 08, 2004 at 15:22:34 (EDT)

---

KANJI ENGRAVING PLEASE! I need three japanese symbols engraved inside a titanium wedding band. Please contact me if you can! Thank you! :)
Apryl Owens <sunnygal88@mail.com>
San Francisco, CA USA - Friday, August 06, 2004 at 15:10:01 (EDT)

---

I have a man's wedding band 12mm wide. I want 3 infinity signs touching each other around the band outside. Please call 940-736-7884.
Juanita Bengfort
Gainesville, tx USA - Thursday, August 05, 2004 at 18:30:26 (EDT)

---

Sir, I have just gotten a SOLID TITANIUM ZIPPO LIGHTER for a gift. I would like someone to maybe put a pool shooter or a rack of pool balls on one side and my name in a fancy lettering on the other side. I do not know if it could be done,being that the lighter is made of Titanium? If this is possible and it would not cost a arm and a leg, please contact me. Thanks Dave
David Constans <shadowdc@sbcglobal.net>
Danville, IL. USA - Wednesday, August 04, 2004 at 15:08:16 (EDT)

---

I have a steel grip cap , in the white and polished from John Kay, Winchester Restorations, that will attach to bottom of pistol grip on my Winchester Shotgun. Would like to have center screw and area around screw engraved. Further engraving to be done around bezel. The top face of the cap will have two numerals in gold and at the bottom of the ovel face will have eight letters in gold starting at a high eight o'clock position , going counter clock wise to a high four o'clock. Slightly outside of the bottom of the bezel will be a gold rope border around the ovel. Work must be completed by late Sept., as blueing procedure will start early Oct. Please call : 970 948 7943 and leave message or e-mail. Thank you.
Bob Perigo <Perigo@sopris.net>
Woody Creek, Co USA - Sunday, August 01, 2004 at 19:23:51 (EDT)

---

***DO YOU REMEMBER THE VICTORIAN DIP PEN OF YORE???? I not only collect beautiful dip pens, but I use them in my hobby of Ornamental Penmanship. A select few choice dip pens were hand engraved, and sometimes enameled. The engravings were usually fairly simple flowers, scrolls, ribbons, etc. that surrounded the manufacturer's name. The nib/s that I would like to have engraved are 14k and measure about 1 1/2" long by 1/2" wide. These nibs are rare and difficult to find and sell for about $150+ at auctions and pen shows. Perhaps the only difficulty in engraving nibs would be the slight curvature of the metal and its thiness. I have several pictures of vintage engraved dip pens, if you are interested in seeing them. Also, you can see one such engraaved nib on my web site: https://hometown.aol.com/arenoir/page1.html Please let me know if you can do such engraving for $75- $100. My email address is ARenoir@aol.com and my phone number is 432-685-3456. Thanks............Ed.
Edward B. Weyman <ARenoir@aol.com>
Midland, TX USA - Thursday, July 29, 2004 at 13:17:42 (EDT)

---

I'd like a quote for work on both sides of a stainless-steel Spyderco Police. I imagine a full-length image of a stalking cougar on one side, and on the other, a series of cougar tracks. I'd like the work to be high-relief, to provide traction for my hand in addition to the aesthetic value. I can provide the artwork--I can draw fairly well, but I leave engraving to the experts.
Chuck Clark <buddydharma@hotmail.com>
Los Angeles , CA USA - Thursday, July 22, 2004 at 17:23:41 (EDT)

---

Hi my name is Andy Hawgood and I am posting this to ask you if could help me engrave a number of different metal products with custom engraving. One of my projects is to engrave a number of bicycles from top to bottom, the entire bike. I would be do a run of these that are going to be a limited edition bike promotion. I don't know if you guys do that stuff, but if you have ideas or leads please contact me and I would be much obliged.
Andy Hawgood <kidbeatnik@yahoo.com>
San Francisco, CA USA - Monday, July 19, 2004 at 16:07:36 (EDT)

---

I purchased a rifle (30/06) as a wedding gift for my soon to be husband. I would like to put and engraving on it, "Till Death Do Us Part". I want it to look antique, can you do this, how long, and how much? Suzanne
Suzanne <suzanne73178@yahoo.com>
Lockport, NY USA - Saturday, July 17, 2004 at 13:07:20 (EDT)

---

I am seeking an expert engraved who can engrave a family coat of arms on a gold pendant about 3/4 inch by 1 inch rounded corners. The gold medalion can be obtained from jewelrey suppliers in blank form. If acceptable quality I will purchase several. My problem in the past has been that modern day "engravers" use laser cutter of some kind which is not as beautiful and deep cut as hand engraving. My proposal is to send you the design I want, then you can engrave a piece of blank brass about 3/16 or 1/4 inch thickwith an outline of the coat of arms with little detail. If I like your quality of craftsmanship I will order blanks from you and you can do the finished work and I am willking to pay in advance for one to show good faith. Then I will order perhaps four. Thanks for your interest Lane T. Sealy, San Antonio, Texas 78209 210-828-7398
Lane T. Sealy <lanesealy@sealycompany.com>
San Antonio, TX USA - Wednesday, July 14, 2004 at 17:36:51 (EDT)

---

I need a 5 letter name engraved on a child's wine goblet. We live in Florida. Goblet will go to Baltimore as a gift could also be taken to an engraver in NJf available.
EH Levy <echlevy@aol.com>
FL. USA - Sunday, July 11, 2004 at 20:19:53 (EDT)

---

We are seeking an engraver (preferrably on the east coast) who can engrave japanese characters (kanji) on our wedding rings...the outside, rather than the inside of the ring.
Linda Seeley <lseeley@mbl.edu>
Woods Hole, MA USA - Wednesday, July 07, 2004 at 12:24:40 (EDT)

---

Hello, I need a quote to engrave a pattern on a particular aluminum object. Here is a link to pictures of the pattern and the object, www.discountcollectibles.com/jim/engraving.htm . The parts to be engraved will be quantity two with dimensions 12"l x 4"w x 1/8"d. They will be made of T-6061 aluminum. These parts will be placed on a custom motorcycle gas tank. One for each side. Thank you for your time, Jim Biggs
Jim Biggs <jim@biggsltd.com>
USA - Tuesday, July 06, 2004 at 23:57:17 (EDT)

---

I would like to have a Masonic emblem engraved on the back of a pocket watch. How long would it take? What would be the cost? When could it be done? Thank you D'Ann Mullis
D'Ann Mullis <amullis@juno.com>
fresno, ca USA - Tuesday, July 06, 2004 at 21:28:54 (EDT)

---

Greetings! We're looking for 1) 150-200 small metal pieces [2" x 1"] and then 2) having these pieces etched with our names and the date of our wedding, preferably in a script font. We'll eventually glue these engraved metal pieces onto the top of a metal tin holding our wedding favors. If this sounds like something you can provide (the metal pieces and the etching), please reply with the cost of your service and the time frame estimated to accomplish this task. Thank you.
Pat Seto <p.seto@comcast.net>
Sunnyvale, CA USA - Sunday, July 04, 2004 at 13:01:02 (EDT)

---

Dear Sir, I am trying to find out how to engrave a piece of jewellery I have. It is a gold pendant in the shape of the continent of Africa and I am wanting to engrave an african 'scene' on it. I have a picture I would like transposed on the jewellery. Can this be done? Or do you have any suggestions of who I could contact. Thanks for any help or advise you can give Angela White AWhite222@hotmail.com
Angela White <AWhite222@hotmail.com>
Australia - Saturday, July 03, 2004 at 23:21:04 (EDT)

---

I have a sterling silver identification bracelet I would like to have hand engraved with two lines of text. I'd like the engraving to be deep and legible, so I suppose some kind of block lettering would be best. Thanks
Raymond Feldman <rayfel@usa.net>
Palo Alto,, CA USA - Wednesday, June 30, 2004 at 01:50:25 (EDT)

---

I have a sterling silver pocket watch, with an open face. I would like to have initials (GWD IV) engraved on the casing as a gift to my husband-to-be. I would like to find someone in Northern California if possible. Thanks!
Lisa <lgilmore78@sbcglobal.net>
San Jose, CA USA - Friday, June 18, 2004 at 00:53:44 (EDT)

---

I have a silver plated haibrush I would like to have initials engraved on
janet barnett <jrlbarnett@cs.com>
lambertville, nj USA - Tuesday, June 15, 2004 at 19:43:00 (EDT)

---

I'm looking to complete a piece of art I'm creating for a special friend of mine and need quality engraving to finish the project. The design is fairly simple but I can't judge the depth, complexity, or time it would take as this isn't my craft. It would be done on a .25" thick 'sheet' of copper, triangle shaped, and the design work approximately 4-5" in diameter. I would prefer an artist who can enhance the design and give me feedback on incorporating his/her own freelance designs on other pieces associated with the main copper engraving. Thank you!
Brian Buckner <Brib28@yahoo.com>
Easley, SC USA - Friday, June 11, 2004 at 02:12:43 (EDT)

---

I have a small plate to engrave my cat's ID. It's not gold, but is metal. I'd like to know if there is anybody near Reston who'd do this work. Thank you ELiani
Eliani Korowajczuk <eliani@celplan.com>
Reston, VA USA - Thursday, June 10, 2004 at 12:55:37 (EDT)

---

I am looking for someone to hand engrave two wedding bands with initials in an antique style font. Thank you!!!
Kim Gaston <iameos@hotmail.com>
Satellite Beach, FL USA - Wednesday, June 09, 2004 at 22:12:31 (EDT)

---

I just need japanese characters on a silver flask. I have the image file, but it is hard to find anyplace to do such a simple task. alpoysa@syr.edu
Aubrey Poysa <alpoysa@syr.edu>
Syracuse, NY USA - Monday, June 07, 2004 at 20:40:59 (EDT)

---

I need some one who can engrave on the outside of the ring the words -- fight the good fight, II Timothy 4:7. This would be engraved on a ring that looks like the One Ring of the Lord of the Rings. I would like it to be in a font that would give a similar look to the writing on the ring in the movie.
David Daniels <dldaniels@sbcglobal.net>
Wichita Falls, TX USA - Monday, June 07, 2004 at 17:48:56 (EDT)

---

I am seeking an engraver to inscribe a word, in fancy lettering (so that it looks more like a design than a word), on the outside surface of each of three rings. The surface is flat except for the curvature of the ring. Dimensions can be provided. The rings are made from MP35N stainless steel, which is very hard and somewhat brittle of a material. The number of characters in the word for two rings will be 8 (same word for both), and for the third will be 9. I have a fourth ring which may be used as a practice piece, if necessary, or I can provide a material sample to test. Please respond with your location, experience, and ballpark cost estimate. Thanks.
Karen <zonk0369@yahoo.com>
Buffalo, NY USA - Thursday, June 03, 2004 at 13:01:36 (EDT)

---

I'm looking for an engrave who works on saxophones. I have a silver plate Selmer Paris that I want to get engraved- the only current engraving it has is the brand name logo, about the size of a quarter. A whole lot of bare horn just waiting to be beautiful! I'm hoping to get some work on the neck, keys, and bell. Thank you for your time Christie J.
Christie J. <PeachCountyPride@aol.com>
Flemington, NJ USA - Thursday, June 03, 2004 at 09:34:43 (EDT)

---

I wish to have a small Sterling silver baby bracelet engraved by hand. The bracelet is a bangle style, and I would like to have either a name or initials engraved. Many thanks! Sue
S. J. Lloyd <jlloyd3@houston.rr.com>
The Woodlands, TX USA - Monday, May 31, 2004 at 16:56:53 (EDT)

---

I would like to find someone to make a Japanese inscripted necklace for my fiance for our anniversary.
Reagan Rodney <bsidebaby23@hotmail.com>
Arden, NC USA - Saturday, May 29, 2004 at 13:33:52 (EDT)

---

I am looking for some custom work on my chef knife. I use my knife every day in a upscale cooking enviroment. I have a 10 inch Gobal its molly b and vnadium. Im looking for some one to help?
ian gatt <ian_gatt@yahoo.com>
sanbruno, ca usa - Thursday, May 27, 2004 at 13:06:01 (EDT)

---

I am looking for some custom work on my chef knife. I use my knife every day in a upscale cooking enviroment. I have a 10 inch Gobal its molly b and vnadium. Im looking for some one to help?
ian gatt <ian_gatt@yahoo.com>
sanbruno, ca usa - Thursday, May 27, 2004 at 13:05:32 (EDT)

---

For Sale. Owner of Buckle, Saddle & Bridle Trim Silversmithing Shop wants to retire. We do a lot of work for Sporting Events, Clay Target Shoots, Etc. Phil Nielsen l 775-358-1320
Philip Nielsen <sss@silverwest.com>
Sparks, NV USA - Friday, May 14, 2004 at 10:55:24 (EDT)

---

I am a jeweler looking to have a simple pattern engraved onto a single platinum wedding ring. Please contact me if you are interested in this kind of work.
Chris <crcarlson@stanford.edu>
menlo park, ca USA - Friday, May 14, 2004 at 00:43:14 (EDT)

---

I am a wax model maker. I recently got engaged, and made my own ring of course... It is platinum with a sapphire center stone surrounded by diamonds. I am looking for a talented engraver to do some organic design on the shank and sides, like leaves and vines.....mill grain as well...... I would like to keep the price range under $250. Contact me if you are interested! Thank you. Peace. Angie
Angie Scopano <gwendolynrain@yahoo.com>
Tannersville, NY USA - Wednesday, May 12, 2004 at 19:35:54 (EDT)

---

I am looking for some one who can engrave a tatto machine, on to a zippo, it is a special gift for my best man and i am looking for someone who can do this for me, please write me back if there is any one that would be willing to do this and let me know the price
lorne poore <primalaudio@aol.com>
Sparks, NV USA - Monday, May 03, 2004 at 12:03:04 (EDT)

---

Looking for full time engraver for our small buckle Mfg. Co. Western saddle & bridle trim and custom work. We also do a lot of award work for shooting sports such as Trap, Skeet and Sporting Clays. Located in Northern Nevada.
Silver State Silver <sss@silverwest.com>
fairfax, va USA - Wednesday, April 28, 2004 at 19:17:56 (EDT)

---

A. Jaffe a fine bridal jewelry manufacturer seeks talented hand engraver to work at our state of the art facitliy in New York City. Experience in 18kt gold and platinum jewelry required. We offer full time employment and benefits. Salary commensurate with experience. Please reply to Ken Karlin by email or call 212-843-7464 x-224
Kenneth Karlin <ken.karlin@thering.com>
New York, NY USA - Wednesday, April 28, 2004 at 11:12:39 (EDT)

---

Very Interested incultivating with a few engravers ~ chance to work with American Watch Co, Vintage engraving on casebacks , movements etc.
Richard <artwork@rgmdesigns.com> www.rgmwatches.com
Mount Joy, PA USA - Tuesday, April 27, 2004 at 09:48:12 (EDT)

---

I own a gift shop that sells silver jewelry.  We are looking for a hand engraver, since some of our customers prefer this engraving for their purchases.  We would like to find an engraver in North Carolina.  forelanes@msn.com

---

10/06/2003
I am looking for someone to engrave 3 japanese characters into a gold band.  This is for a wedding ring so I need the quality to be outstanding and price is not a consideration.  Please respond to mojodvm@aol.com.

---

9/19/2003
We are looking for a qualified engraver in the middle Tennessee area, to recreate classic hand engraved patterns on musical instruments. Mboomre2@aol.com

---

9/08/2003
I am looking for an engraver to write a sentence about
12-15 words long.  It will be on a picture frame.  Please respond to
Doomedus@yahoo.com.  thank you

---

8/20/2003
I'm looking for an experienced engraver to help with 2 wedding bands, to be inscribed on the outside and inside with a phrase of my choosing, in the style of the One Ring (Lord of the Rings,
Tolkien).  I'd prefer for the bands to be 4-5mm and 8-10mm in width, and approximately size 8 and 10 respectively.  Please respond to lynette@ucla.edu with details about years of experience hand engraving, and approximately how much would something like that cost.

---

7/15/2003
I am a private individual in need of a hand engraver to carve three initials in back of a gold pocket watch. Not a big job but the item in question is a family keepsake and I want to hand it down to my son upon the occasion of his wedding.
I am interested in hand engravers in the immediate bay area (San Francisco or the East Bay).
Thank you,
T Swope Tom.Swope@athenian.org

---

I adore antique dinnerware and recently expanded my set to include eight five piece stainless place settings.  I am looking for a very specific font and would like the initial 'S' engraved on each piece of dinnerware (40 pc.) If this is your forte, please E-mail me at: Asweetchef@aol.com

---

Hello,
I live in Van Nuys.  I am looking for a someone to engrave Japanese Characters (Kanji) on two rings that I have.  Could someone contact me if that is possible at dragonpriestess@adelphia.net
Thank you,
Karen

---

I am looking for an engraver to hand engrave a three letter monogram on a sterling silver frame.  I have not yet purchased the frame and prefer curved silver rather than flat.  Can a handsome monogram go onto a curved frame? 
Helene Chandler hlchandler@earthlink.net

---

My cousins 18th birthday was may 1st and my younger cousin and I were lookin to engrave out names on the back of a claddagh necklace for her but all the businesses say its to small for their machines to engrave on it...so i would really appreciate it if someone can engrave for us ...email me at ktshamgrl@hotmail.com  I live in Illinois.

---

I am looking for someone to hand engrave the inside of my husband's wedding ring for our anniversary. He and I are huge fans of J.R.R. Tolkien, so I would like for it to be a short message in the script style that Tolkien created. I have a template for how it should look, fortunately,
since someone was kind enough to create a font for MS Word in Tolkien Style.
Thank you for your help!

---

I am looking for someone to engrave a gaurd on a shell gaurd rapier.  It is steel and probably stainless.  The area is about 4"+ in dia.  I'm looking for perhaps a family crest or motto.  If interested, please e-mail me at chip_h_m@mindspring.com.  I'm looking for quotes and such.  Thanks.

---

I am looking for a talented hand engraver in metro Georgia to engrave an inscription on the outside of a new wedding band for my wife. I might add that the inscription is not the English alphabet.  Unfortunately I need it completed by March 13th 2003.
Please email me at simminak@aol.com

---

I am looking for a hand engraver who can restore an engraved pattern on a wide antique wedding band. Ring is made of rose gold with floral pattern. Indiana or Southern MI area.
Thanks. rraeclark@hotmail.com

---

I am looking for an engraver to engrave a person's NAME onto a hunting rifle barrel.
I live in Oklahoma City...I have asked a jeweler but would like someone who really knows
how to engrave on guns.
Bill bki@telepath.com

---

Looking for an experienced hand engraver to engrave a name on an antique sterling baby cup.  Please contact Kath Martin
P.O. Box 161, Saxtons River, VT 05154 or steelekat@hotmail.com

---

I have a 14K gold dome ring that I would like to have my initials hand engraved on.  I am looking for someone in the Central Georgia area.  Please e-mail me at Tamyjones@aol.com.  Thank you.

---

Looking for an experienced hand engraver for a sterling silver pocket watch, in the New York city or Long Island area.  Please contact Steve at puma@programmer.net
Thank you

---

I am considering an intricately carved wedding band in lieu of the traditional engagement ring/wedding band duo.  Our wedding date is in March 2003, and we are looking for an engraver to work with us.  Please contact us at marthamcg@earthlink.net

---

I am looking for someone to hand engrave a line of 7mm bands. If interested, e-mail michelekozar@msn.com

 

Thank you

---

In need of an engraver for a baby rattle.
Curved surface ~ Send email to:
phbx@comcast.net

---

I am interested in an engraver for stone.  I am trying to attain prices.
Thank you,
bjlandry@nbnet.nb.ca

---

We are interested in working with more than one engraver on an on-going basis.  We do already have three engravers....each one specializes in a certain pattern, style, technique and/or touch.  I like to work with a craftsperson that is best suited for each project so it is nice to have a variety of talented people to work with so I can best match up the project with the artist and get the best result.

You will noticed some engraved rings on our website.  We are interested in creating some new patterns and designs and expanding our engraved ring gallery and offerings.  I am interested in offering the following engraving work to my clients and therefore am seeking engravers that can do the following (I understand each engraver would probably be better at one task and not all):

bright cut engraving
relief engraving
crests and seals
inside ring inscriptions
flat face ring inscriptions (face/wall of bands)

We are looking for on going relationships.  We work with all of our craftsmen more like a partnership.  We appreciate each craftsperson's skills, talents and limitations and try to work within their best areas.

Judi Anderson
Bijoux Extraordinaire, Ltd.
web: www.JewelryExpert.com
email: judi@jewelryexpert.com

If you are looking for a hand engraver please use the Engraver Needed Form Page to submit your inquiry.